2022年芯片资料[参 .pdf
July 2008 Rev 21/99MC33172 MC35172Low power dual bipolar operational amplifiersFeaturesGood consumption/speed ratio: only 200 A for 2.1 MH z, 2 V/sSingle (or dual) supply operation from +4V to +44 V ( 2 V to 22V)Wide input common mode mode voltage range including VCC-Low level output voltage close to VCC- : 100 mV typicalPin-to-pin compatible with standard dual operational amplifiersDescriptionThe MC3x172 series are dual bipolar operational amplifiers offering both low consumption (200 A/Amp) and good speed (2.1MHz, 2 V/s).Moreover, the input common mode range extends down to the lower supply rail, allowing single supply operation from +4V to +44V.NDIP8(Plastic package)DSO-8(Plastic micropackage)12345678-+-+OuptutInverting Input 2Non-inverting Input 2Inverting Input 1Output 1Non-inverting Input 1VCCVCCPin connections(top view)名师资料总结 - - -精品资料欢迎下载 - - - - - - - - - - - - - - - - - - 名师精心整理 - - - - - - - 第 1 页，共 9 页 - - - - - - - - - Circuit schematicsMC33172 MC351722/91 Circuit schematicsFigure 1.Typical schematic diagram (1/2 MC33172/MC35172)V +CCT1T7R4T8T9R3T6T2T5T3R1T4R2T13T14T19R5R7R8T10T11R6T15T16R9T20R10T17Input +T12T13T24CT21T22R11T23T27T29R12R15T30T31T28R14OutputR13V -CCInput -T25T26名师资料总结 - - -精品资料欢迎下载 - - - - - - - - - - - - - - - - - - 名师精心整理 - - - - - - - 第 2 页，共 9 页 - - - - - - - - - MC33172 MC35172Absolute maximum ratings and operating conditions 3/92 Absolute maximum ratings and operating conditionsTable 1.Absolute maximum ratings (AMR)SymbolParameterValueUnitVCCSupply voltage 22VVidDifferential input voltage see note (1)1.Either or both input voltages must not exceed the magnitude of VCC.VVinInput voltage see note 1VOutput short-circuit durationIndefinitesToperOperating free-air temperature rangeMC33172MC35172-40 to 105-55 to 125CRthjaThermal resistance junction to ambient(2)SO-8DIP82.Short-circuits can cause excessive heating and destructive dissipation. Values are typical.12585C/WRthjcThermal resistance junction to case(2)SO-8DIP84041C/WTjJunction temperature150CTstgStorage temperature-65 to 150CESDHBM: human body model(3)3.Human body model: A 100pF capacitor is charged to the specified voltage, then discharged through a 1.5 kresistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating. 2kVMM: machine model(4)4.Machine model: A 200pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor 5 ). This is done for all couples of connected pin combinations while the other pins are floating.200VCDM: charged device model(5)5.Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to the ground through only one pin. This is done for all pins.1kVLatch-up immunityClass ATable 2.Operating conditionsSymbolParameterValueUnitVCCSupply voltage2 to 22V名师资料总结 - - -精品资料欢迎下载 - - - - - - - - - - - - - - - - - - 名师精心整理 - - - - - - - 第 3 页，共 9 页 - - - - - - - - - Electrical characteristicsMC33172 MC351724/93 Electrical characteristicsTable 3.VCC+ = +15V, VCC- = -15V, RL connected to Ground, Tamb = 25 C (unless otherwise specified)SymbolParameterMin.Typ.Max.UnitVioInput offset voltageVCC+ = +15V, VCC- = -15V , Vic = 0VVCC+ = 5V, VCC- = 0V, Vic= 0V, Vo = 1.4VVCC+ = +15V, VCC- = -15V , Vic = 0V, Tmin TambTmax114.556.5mVDVioInput offset voltage drift10V/ CIioInput offset current (Vic = 0V)TminTambTmax52040nAIibInput bias current (Vic = 0V) TminTambTmax20100200nAAvdLarge signal voltage gain (RL = 10k , Vo = 10V)TminTambTmax5025100V/mVVOHHigh level output voltageVCC+= 5V, VCC-= 0V, RL = 10k VCC+= +15V , VCC = -15V , RL= 10k VCC+= +15V, VCC-= -15V, RL= 10k , Tmin TambTmax3.513.613.34.214.2VVOLLow level output voltageVCC+= 5V, VCC-= 0V, RL= 10k VCC+= +15V , VCC-= -15V , RL= 10k VCC+= +15V, VCC-= -15V, RL= 10k , Tmin TambTmax0.1-140.15-13.6-13.3VIscOutput short-circuit current (Vid = 1V, Vo = 0V)SourceSink315627mAVicmInput common mode voltage rangeTminTambTmaxVCC- to VCC+ - 1.8)VCC- to (VCC+ - 2.2)VCMRCommon-mode rejection ratio (Vic = Vicm-min)80100dBSVRSupply voltage rejection ratio (VCC = 5 to 15V)80100dBICCSupply currentVCC+ = 5V, VCC- = 0V, no loadVCC+ = +15V, VCC- = -15V , no loadVCC+ = +15V, VCC- = -15V no load, Tmin TambTmax200220250250300ASRSlew rate (Vin = 10V, RL = 10k , CL = 100pF)1.62V/ sGBPGain bandwidth productRL = 10k , CL = 100pF , F= 100kHz1.42.1MHz mPhase margin (RL = 10k , CL = 100pF)45DegreesenEquivalent input noise voltage (F = 1kHz)29THDTotal harmonic distortion0.05%VO1/VO2Channel separation120dBnVHz- - - -名师资料总结 - - -精品资料欢迎下载 - - - - - - - - - - - - - - - - - - 名师精心整理 - - - - - - - 第 4 页，共 9 页 - - - - - - - - - MC33172 MC35172Package information 5/94 Package informationIn order to meet environmental requirements, STMicroelectronics offers these devices in ECOPACK? packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an STMicroelectronics trademark. ECOPACK specifications are available at: .名师资料总结 - - -精品资料欢迎下载 - - - - - - - - - - - - - - - - - - 名师精心整理 - - - - - - - 第 5 页，共 9 页 - - - - - - - - - Package informationMC33172 MC351726/94.1 DIP8 package informationFigure 2.DIP8 package mechanical drawingTable 4.DIP8 package mechanical dataRef.DimensionsMillimetersInchesMin.Typ.Max.Min.Typ.Max.A5.330.210A10.380.015A22.923.304.950.1150.1300.195b0.360.460.560.0140.0180.022b21.141.521.780.0450.0600.070c0.200.250.360.0080.0100.014D9.029.2710.160.3550.3650.400E7.627.878.260.3000.3100.325E16.106.357.110.2400.2500.280e2.540.100eA7.620.300eB10.920.430L2.923.303.810.1150.1300.150名师资料总结 - - -精品资料欢迎下载 - - - - - - - - - - - - - - - - - - 名师精心整理 - - - - - - - 第 6 页，共 9 页 - - - - - - - - - MC33172 MC35172Package information 7/94.2 SO-8 package informationFigure 3.SO-8 package mechanical drawingTable 5.SO-8 package mechanical dataRef.DimensionsMillimetersInchesMin.Typ.Max.Min.Typ.Max.A1.750.069A10.100.250.0040.010A21.250.049b0.280.480.0110.019c0.170.230.0070.010D4.804.905.000.1890.1930.197E5.806.006.200.2280.2360.244E13.803.904.000.1500.1540.157e1.270.050h0.250.500.0100.020L0.401.270.0160.050k1818ccc0.100.004名师资料总结 - - -精品资料欢迎下载 - - - - - - - - - - - - - - - - - - 名师精心整理 - - - - - - - 第 7 页，共 9 页 - - - - - - - - - Ordering informationMC33172 MC351728/95 Ordering information6 Revision historyTable 6.Order codesOrder codeTemperature rangePackagePackingMarkingMC33172N-40 C, +105 CDIP8TapeMC33172NMC33172DMC33172DTSO-8Tape orTape & reel33172MC35172N-55 C, +125 CDIP8TapeMC35172NMC35172DMC35172DTSO-8Tape orTape & reel35172Table 7.Document revision historyDateRevisionChanges24-Nov-20011Initial release.01-Jul-20082ESD values and latch-up immunity added in Table 1: Absolute maximum ratings (AMR).名师资料总结 - - -精品资料欢迎下载 - - - - - - - - - - - - - - - - - - 名师精心整理 - - - - - - - 第 8 页，共 9 页 - - - - - - - - - MC33172 MC35172 9/9Please Read Carefully:Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST ”) reserve theright to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at anytime, without notice.All ST products are sold pursuant to STs terms and conditions of sale.Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes noliability whatsoever relating to the choice, selection or use of the ST products and services described herein.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of thisdocument refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party productsor services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of suchthird party products or services or any intellectual property contained therein.UNLESS OTHERWISE SET FORTH IN STS TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIEDWARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIEDWARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWSOF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOTRECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAININGAPPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS AUTOMOTIVEGRADE MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USERS OWN RISK.Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately voidany warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, anyliability of ST.ST and the ST logo are trademarks or registered trademarks of ST in various countries.Information in this document supersedes and replaces all information previously supplied.The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.? 2008 STMicroelectronics - All rights reservedSTMicroelectronics group of companiesAustralia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of A名师资料总结 - - -精品资料欢迎下载 - - - - - - - - - - - - - - - - - - 名师精心整理 - - - - - - - 第 9 页，共 9 页 - - - - - - - - -
