小区地下停车库结构设计.doc
摘 要由于近几年我国国内生产总值的不断高速增长，国民的生活水平不断提高。私家车作为国家经济的支柱，它的增长速度也是越来越快。但随着私家车的急速增长，相应的停车位缺是增长缓慢。本次设计的小区地下停车库，采用升降式构造，每层有两个车位。这种停车库构造能够充分利用小区地下的空间，把有限的空间应用的淋漓尽致。并且样式也很美观，外观能与小区环境完美融合。在停车或者取车进展升降时，速度也很快捷，不用等待较长时间。本次设计的车库实用性能较强，可以比以前提供更多的停车位置，大大缓解了小区车位紧张的情况，对改善小区停车紧张起到了很好的缓解作用。本次设计从停车库的方案确定，滑轮、钢丝绳，升降装置等来进展设计计算，构造合理，平安系数高，具有相当的实用性。关键词：停车库；升降装置 AbstractDue to the rapid growth of China's GDP in recent years, the living standard of our country is constantly improving. As a pillar of the national economy, private cars are growing faster and faster. But with the rapid growth of private cars, the corresponding parking space is slow growth. The design of the underground parking garage, using the lifting structure, each floor has two parking Spaces. This kind of parking structure can make full use of the underground space of the community, and use the limited space application incisively and vividly. And the style is also beautiful, the appearance can be perfectly integrated with the community environment. The speed is also very fast when you stop or pick up the car, and you don't have to wait a long time. The design of the garage and practical performance is strong, can provide more than the previous parking location, greatly relieve the strain on the residential parking situation, to improve the residential parking tense has played a very good relief.The design of this design is determined from the plan of the parking garage, such as pulley, wire rope, lifting device and so on to carry out the design calculation, the structure is reasonable, the safety factor is high, has the considerable practicality.Key words：Parking garage Lifting gear目 录 1 绪论52 车库的构造设计计算和零件选择12.1 钢材的选用12.1.1 车库上边框钢材的选择12.1.2 库架支撑钢的选择22.1.3 上下层支撑钢的选择22.1.4 升降台辅助支撑钢的选择22.1.5 链轮支撑钢的选择22.1.6 链轮辅助支撑钢的选择32.1.7 滑轮支撑钢的选择32.1.8 滑轮辅助支撑钢的选择32.1.9 上下层支撑横向连接钢的选择32.1.10 滑轮支撑钢横向连接钢的选择32.1.11 链轮支撑横向连接钢的选择42.1.12 载车板横向边缘钢42.2 载车板的构造和尺寸的设计算4 升降系统各零部件的构造设计和尺寸确定62.3.1 升降台构造的初步设计62.3.2 钢丝绳的设计计算62.3.3 钢丝绳夹的选择82.3.4 滑轮及其组件的设计计算92.3.5 卷筒的设计计算和尺寸确定132.3.6 升降链及链轮的选择172.3.7 升降电动传动链及连轮的连轮的设计计算192.4 横移机构的设计222.4.1 轨道和导轮的设计计算222.4.2 横移电动机的设计计算及型号选择252.4.3 带及带轮的选择253 车库其它配备要求283.1 电控系统283.1.1 控制系统组成283.1.2 控制系统的运行方式29293.2 照明293.3 排水303.4 消防30总 结31致 谢31需毕业论文正文全文及全套图纸可联系: QQ:631768401 海天机械设计 TEL:另本工作室承接机械类毕业设计与课程设计，欢送咨询。第 4 页
