3.物位仪表安装.docx

Salco-NFC-Electrical-ITP-I-3NFC；'仕心八Sf AlZsC_SALC。）namvaran物位仪表安装检查记录Inspection Record of Level sensor Installation工程名称Project Name施工单位Contractor检查部位Location验收依据Acceptance Basis符合设计图纸要求Meet requirement of design drawing相关图号Refer Drawing No.序号No内容Content要求Requirement检查结果Check Result(Acc/Rej)1型号、规格、外观Type & Specification & Appearance符合设计、厂家文 件Meet the design/vendor document2物位仪表取源部件安装位置(物位变化灵敏，检测元件 不受物料刺激；静压液位计取源远离液体进出口) Installing position of the level tap(The level change is sensitive, the detection element is not stimulated by the material; the hydrostatic level tap away from the inlet and outlet of the liquid)符合设计要求Meet the design3仪表及附件(安装位置、方式及条件；与管道直连的仪 表安装应考虑压力试验与吹扫清洗；仪表接线箱的进出 口封闭；绝缘电阻测量时防弱电设备损坏措施；) Analysis instrument and accessories (install position, method and conditions; directly connected with the pipe installation of the instrument should consider the pressure test and purge cleaning; instrument wiring box inlet and outlet sealed; Measures should be taken during IR test prevent weak current equipment damage )符合设计要求 Meet the design4仪表校验Instrument Calibration符合设计要求Meet the design5尾项清单Punch listYES/NORemarks (Test report/Calibration report attached if any; attached the equipment list)检查日期 Inspection date:Responsible person of construction contractorSignature:DateAccepted by QC of NFCSignature:Date