毕业设计封面_secret.doc
武汉科技大学本科毕业设计本科毕业设计题目：康馨小区住宅楼1#建筑结构设计学 院:城市建设学院专 业:土木工程0604学 号:200608141128学生姓名:罗亮指导教师:孙艳日 期:2010.6 ii 摘 要本次毕业设计的题目是“康馨小区住宅楼1#”。该工程建设地点位于武汉市，是一个10层住宅楼，框架填充墙结构，占地面积约918m2。整个毕业设计包括建筑设计和结构设计两大部分,我主要进行了结构方案中横向框架第轴线框架的设计。根据毕业设计任务书的要求，建筑设计我主要完成了建筑设计总说明、总平面图、首层平面图、标准层平面图、顶层平面图、正立面图、背立面图、侧立面图、主要剖面图以及详图的绘制。结构设计主要包括结构计算书的编写及结构施工图的绘制：一 编写结构计算书：主要包括荷载计算（有恒载、活载、风载以及重力荷载代表值的计算），内力计算（竖向荷载采用弯矩二次分配法计算，水平荷载采用D值法计算），内力组合，框架梁、柱截面设计以及构件设计（基础、楼板、楼梯设计）。二 绘制结构施工图：根据上述计算结果以及根据规范要求确定的结构构件的构造措施，主要完成了结构设计总说明、基础平面布置图、标准层板配筋图、屋面板配筋图、框架梁、柱配筋图以及楼梯配筋图的绘制。关键词： 建筑设计； 结构设计； 荷载计算AbstractThe title of this graduation design is “district apartment buildings of KangXin of 1#”. The location of this project is wuhan, it is a quarters with 10floors, structure of framework with wall filled in, and the size is about 918m2. This graduation design is mainly component of Architectural Design and Structural Design, and I mainly do the frame design in the transversal frameworks of axis of the structural design.According to the graduation design specifications, I mainly complete writing the general information of construction design, drawing the master plan、the first floor plan、the standard floor plan、the top floor plan、the front elevation drawing、the backside elevation drawing、the lateral elevation drawing、the main profile map and the detail drawings.The structural design is mainly component of compiling the structural calculation book and drawing the structural construction drawings.1. Compile the structural calculation book: Mainly include the load calculation which is consist of the calculation of the dead loads、the live loads、the wind load and the represent values of the gravitational load, the internal force calculation where the vertical load is calculated by second moment distribution method and the horizontal load is calculated by the method of D-value, the internal force combination, the design of the beam and column of the frameworks, and the design of components such as the foundations、the floors and the stairs.2. Drawing the structural construction drawings: According to the calculation result described above and the structural structure measuring of component according to the request of norm, I mainly complete writing the general information of structural design, complete drawing the layout plan of the foundations, complete the reinforcement drawings of the standard floor and the top floor, complete the reinforcement drawings of the beam and column of the frameworks, complete the reinforcement drawings of the stair. Key words: Architectural design; Structural design; Load calculation
