施工安全会议纪要.doc
施工安全会议纪要施工安全会议纪要施工安全制度1、加强对施工人员的安全教育和岗前培训工作。2、严格贯彻安全操作规程，禁止违章作业。3、安全生产小组定期招开安全生产会，对施工生产中存在的安全问题和隐患及时纠正排除，做到警钟长鸣。4、专职安全员要深入现场检查工作，发现问题及时纠正制止，防止安全事故发生，当生产与安全发生矛盾时，要服从安全。 5、做好生活区和现场区的安全保卫工作，确保工作人员的人身安全和材料、设备不丢失。6、做好安全防火、防暴工作，安全标志要齐全醒目，现场配置灭火器具，严禁在易燃、易爆、危险品储存区或企业现场使用明火或吸烟。7、机电设备必须专人保管，持证上岗，严禁酒后驾车和无证操作。control-main control at construction stage construction program reasonable, installation pliance with the standards and specifications.Especially hidden project quality control, strict inspection and acceptance and make records in a timely manner.To strengthen management of civilized construction work.(4) use-phase quality control-"s ultimate aim is to meet the requirements of project quality control.To this end, the quality of engineering after the delivery, must be prepared to return, warranty system and technical services archives work, improve the quality of technical service.(5) to achieve the goal of quality control it is necessary to seriously implement the quality assurance manual Pass.2.main controlposition (1) procurement in operation is responsible for, a person shall not privately contact the supplier.IS09002 management procurement procedures according to pany procedures.(2) duty personnelcertificate holders, strict induction training certificates, untrained staff induction control.(3) serious, carefully drag prepared, drags before construction technology to give the low-down,technicians and construction workers should be reserved strictly embedded live, quality.(4) when installing the riser where you want to control the fi_ation and e_pansion joints, e_pansion joints according to the requirements, two fi_ed support should be given to a central location.(5) waterproof casing (especially underground pool of water pipe) take control of waterproof seam leakage, it tube embedded, packing enough嫩右工地施工安全会议纪要合同名称:嫩江右岸省界堤防工程扎泰联防段(扎K15+000扎K20+20_)堤防工程施工合同编号:NYJ-SG-HT/YHDK-2021-3会议名称:开工前施工安全会议时间:2021年6月14日参加单位及参加人员: 地点:工地会议室沙学志、曲士聃、呼国志、李玉江、黄喜权、宋建辉等全体施工人员。会议主持人:王国军记录人:张树东会议内容:1.会议首先研究讨论当前本标段面临的安全形势，对目前的几个施工环节进行安全评价，提出了目前应当注意的几项风险因素。2.在施工现场设置安全标志牌、警示牌、油罐上喷涂“禁止烟火”字样，并采取防火措施，如不准在油罐附近吸烟等。3.在填塘运输土方过程中，要求驾驶人员注意安全行车，避免发生交通事故。4.在装车时注意挖掘机与自卸车的距离，防止发生碰撞事故。5.住区注意安全用电和安全防火工作。6.要求全体参加施工人员与当地村民保持和睦关系，杜绝打架斗殴等事件发生。control-main control at construction stage construction program reasonable, installation pliance with the standards and specifications.Especially hidden project quality control, strict inspection and acceptance and make records in a timely manner.To strengthen management of civilized construction work.(4) use-phase quality control-"s ultimate aim is to meet the requirements of project quality control.To this end, the quality of engineering after the delivery, must be prepared to return, warranty system and technical services archives work, improve the quality of technical service.(5) to achieve the goal of quality control it is necessary to seriously implement the quality assurance manual Pass.2.main controlposition (1) procurement in operation is responsible for, a person shall not privately contact the supplier.IS09002 management procurement procedures according to pany procedures.(2) duty personnelcertificate holders, strict induction training certificates, untrainedstaff induction control.(3) serious, carefully drag prepared, drags before construction technology to give the low-down, technicians and construction workers should be reserved strictly embedded live, quality.(4) when installing the riser where you want to control the fi_ation and e_pansion joints, e_pansion joints according to the requirements, two fi_ed support should be given to a central location.(5) waterproof casing (especially underground pool of water pipe) take control of waterproof seam leakage, it tube embedded, packing enough嫩右工地施工安全会议纪要合同名称:嫩江右岸省界堤防工程扎泰联防段(扎K15+000扎K20+20_)堤防工程施工合同编号:NYJ-SG-HT/YHDK-2021-3会议名称:施工安全会议时间:2021年7月8日参加单位及参加人员: 地点:工地会议室沙学志、曲士聃、呼国志、李玉江、等全体施工人员。会议主持人:王国军记录人:张树东会议内容:1.针对天气已转入炎夏时节的情况，要求所有人员一律不准到绰尔河洗澡、钓鱼，以免发生淹溺现象。2.填塘运输车辆会车时要注意礼让，防止交通事故。3.油罐附近避免明火作业，禁止吸烟。4.检查住区用电线路及用电器具，防止发生火灾及触电事故。5.对施工机械设备从人员进行安全操作管理，做好安全培训。control-main control at construction stage construction program reasonable, installation pliance with the standards and specifications.Especially hidden project quality control, strict inspection and acceptance and make records in a timely manner.To strengthen management of civilized construction work.(4) use-phase quality control-"s ultimate aim is to meet the requirements of project quality control.To this end, the quality of engineering after the delivery, must be prepared to return, warranty system and technical services archives work, improve the quality of technical service.(5) to achieve the goal of quality control it is necessary to seriously implement the quality assurance manual Pass.2.main controlposition (1) procurement in operation is responsible for, a person shall not privately contact the supplier.IS09002 management procurement procedures according to pany procedures.(2) duty personnelcertificate holders, strict induction training certificates, untrained staff induction control.(3) serious, carefully drag prepared, drags before construction technology to give the low-down, technicians and construction workers should be reserved strictly embedded live, quality.(4) when installing the riser where you want to control the fi_ation and e_pansion joints, e_pansion joints according to the requirements, two fi_ed support should be given to a central location.(5) waterproof casing (especially underground pool of waterpipe) take control of waterproof seam leakage, it tube embedded, packing enough嫩右工地施工安全会议纪要合同名称:嫩江右岸省界堤防工程扎泰联防段(扎K15+000扎K20+20_)堤防工程施工合同编号:NYJ-SG-HT/YHDK-2021-3会议名称:施工安全会议时间:2021年8月28日参加单位及参加人员: 地点:工地会议室沙学志、曲士聃、呼国志、李玉江、等全体施工人员。会议主持人:王国军记录人:张树东会议内容:1.对新进场民工队的全体人员进行安全教育，向他们明确提出现场施工的注意事项、安全要求及违章处罚措施，使每个施工人员都具备较强的安全意识。2.对混凝土护脚施工进行了安全评价，重点应注意拌合过程中防止发生触电事故和机械伤人，运输熟料过程中防止发生交通事故，在倾倒熟料前防止翻斗车滑落坝下等。3.要求全体作业人员遵守乘车规定，防止在上下班时发生伤人事故。4.注意住区及油罐的安全防火。5.注意用电安全。6.混凝土拌合场内电线掩埋地下7.发电机组已经搭棚覆盖control-main control at construction stage construction program reasonable, installation pliance with the standards and specifications.Especially hidden project quality control, strict inspection and acceptance and make records in a timely manner.To strengthen management of civilized construction work.(4) use-phase quality control-"s ultimate aim is to meet the requirements of project quality control.To this end, the quality of engineering after the delivery, must be prepared to return, warranty system and technical services archives work, improve the quality of technical service.(5) to achieve the goal of quality control it is necessary to seriously implement the quality assurance manual Pass.2.main controlposition (1) procurement in operation is responsible for, a person shall not privately contact the supplier.IS09002 management procurement procedures according to pany procedures.(2) duty personnelcertificate holders, strict induction training certificates, untrained staff induction control.(3) serious, carefully drag prepared, drags before construction technology to give the low-down, technicians and construction workers should be reserved strictly embedded live, quality.(4) when installing the riser where you want to control the fi_ation and e_pansion joints, e_pansion joints according to the requirements, two fi_ed support should be given to a central location.(5) waterproof casing (especially underground pool of water pipe) take control of waterproof seam leakage, it tube embedded, packing enough嫩右工地施工安全会议纪要合同名称:嫩江右岸省界堤防工程扎泰联防段(扎K15+000扎K20+20_)堤防工程施工合同编号:NYJ-SG-HT/YHDK-2021-3会议名称:施工安全会议时间:2021年9月19日参加单位及参加人员: 地点:工地会议室工地全体人员会议主持人:王国军记录人:张树东会议内容:1.针对作业过程中出现的安全隐患，重点做好浇筑时的安全工作，主要是在翻斗车倒料时挑选反应灵敏的年轻人，用垫块掩住车轮，防止滑下坝下，造成车辆及人员伤害。2.由于气温逐渐降低，早晨在启动发电机时，要防止设备伤人。3.油罐附近禁止明火作业，加强夜间巡视，防止油料丢失。4.因天气转冷，夜间打更人员要增加衣物，加强巡视，防止物质丢失。5.人员运输车已按要求加装护栏。control-main control at construction stage construction program reasonable, installation pliance with the standards and specifications.Especially hidden project quality control, strict inspection and acceptance and make records in a timely manner.To strengthen management of civilized construction work.(4) use-phase quality control-"s ultimate aim is to meet the requirements of project quality control.To this end, the quality of engineering after the delivery, must be prepared to return, warranty system and technicalservices archives work, improve the quality of technical service.(5) to achieve the goal of quality control it is necessary to seriously implement the quality assurance manual Pass.2.main controlposition (1) procurement in operation is responsible for, a person shall not privately contact the supplier.IS09002 management procurement procedures according to pany procedures.(2) duty personnelcertificate holders, strict induction training certificates, untrained staff induction control.(3) serious, carefully drag prepared, drags before construction technology to give the low-down, technicians and construction workers should be reserved strictly embedded live, quality.(4) when installing the riser where you want to control the fi_ation and e_pansion joints, e_pansion joints according to the requirements, two fi_ed support should be given to a central location.(5) waterproof casing (especially underground pool of water pipe) take control of waterproof seam leakage, it tube embedded, packing enough嫩右工地施工安全会议纪要合同名称:嫩江右岸省界堤防工程扎泰联防段(扎K15+000扎K20+20_)堤防工程施工合同编号:NYJ-SG-HT/YHDK-2021-3会议名称:施工安全会议时间:2021年10月21日参加单位及参加人员: 地点:工地会议室工地全体人员会议主持人:王国军记录人:张树东会议内容:1.工程已临近收尾，要求全体施工人员进一步强化安全意识，不要放松警惕，做好安全工作，善始善终。2.随着工程收尾日期的临近，各施工作业中队要及时收回材料、物质、工具、器具等，防止使用保管不善而发生丢失、损坏。3.要求施工人员一如既往地做好防火工作和用电安全管理的各项工作。4.重点做好油料保管工作，防止油料丢失。5.对撤离工地人员进行安全提示，提醒撤点人员注意归程安全。control-main control at construction stage construction program reasonable, installation pliance with the standards and specifications.Especially hidden project quality control, strict inspection and acceptance and make records in a timely manner.To strengthen management of civilized construction work.(4) use-phase quality control-"s ultimate aim is to meet the requirements of project quality control.To this end, the quality of engineering after the delivery, must be prepared to return, warranty system and technical services archives work, improve the quality of technical service.(5) to achieve the goal of quality control it is necessary to seriously implement the quality assurance manual Pass.2.main controlposition (1) procurement in operation is responsible for, a person shall not privately contact the supplier.IS09002 management procurement procedures according to pany procedures.(2) duty personnelcertificate holders, strict induction training certificates, untrainedstaff induction control.(3) serious, carefully drag prepared, drags before construction technology to give the low-down, technicians and construction workers should be reserved strictly embedded live, quality.(4) when installing the riser where you want to control the fi_ation and e_pansion joints, e_pansion joints according to the requirements, two fi_ed support should be given to a central location.(5) waterproof casing (especially underground pool of water pipe) take control of waterproof seam leakage, it tube embedded, packing enough第 12 页 共 12 页
