输出齿轮参数计算.xls

齿齿 轮轮 参参 数数 表表项目代号齿数Z11.000011.0000模数m12.000012.0000压力角20%D0.3491变位系数x0.50000.5000全齿高h27.000025.0626 齿顶高系数ha*1.0000分度圆直径d132.0000基圆直径db124.0394齿根圆直径df114.0000齿轮副中心距及其极限偏差a%pfa侧隙j刀具基准齿形精度等级GB100095-200110-9-9 GJ跨测齿数k2.59683.0000公法线长度及公差Wk EwmsEwmi测量柱（球）直径dm量柱（球）测量距及偏差MEmsEmi齿圈径向跳动公差Fr126.0000公法线平均长度Wk 94.516994.271694.1909公法线长跳动公差Fw齿形公差ff齿距极限偏差%pfpt齿向公差F38.0000径向间隙系数C*0.2500齿距极限偏差%pfpt38.0000齿厚上偏差EssG（-6fpt）-228.0000齿厚下偏差EsiJ（-10fpt）-380.0000公法线上偏差Ewms-245.2780-245.2780公法线下偏差Ewmi-326.0551-326.0551齿顶圆da168.0000齿顶削减后da164.1252164.1252齿顶高(da-d)/2=18.0000削齿后齿顶高(da-d)/2=16.0626齿高缩短率(da-da)/(da-d)0.1076齿顶缩短量与m的比值(da-da)/2/m0.1615m13.6771Zdk/m810.6377911.65171012.66481113.67711214.68861315.69941416.70951517.71911618.72821719.73681820.7451921.75272022.76012123.76722224.77392325.78032426.78642527.79232628.7982729.80342830.80862931.81363032.81843133.8233234.82753335.83183436.83593537.843638.84393739.84763840.85133941.85484042.85824143.8615 4244.86474345.86784446.87084547.87384648.87664749.87944850.88214951.88475052.88735153.88975254.89225355.89455456.89685557.89915658.90125759.90345860.90555961.90756062.9095Zda/m1012.66481113.67711214.68861315.69941416.70951517.71911618.72821719.73681820.7451921.75272022.7601VLOOKUPVLOOKUPSee AlsoSearches for a value in the leftmost column of a table,and then returns a value in the same row from a column you specify in the table.Use VLOOKUP instead of HLOOKUP when your comparison values are located in a column to the left of the data you want to find.The V in VLOOKUP stands for Vertical.SyntaxSyntaxVLOOKUPVLOOKUP(lookup_valuelookup_value,table_arraytable_array,col_index_numcol_index_num,range_lookup)Lookup_value is the value to be found in the first column of the array.Lookup_value can be a value,a reference,or a text string.Table_array is the table of information in which data is looked up.Use a reference to a range or a range name,such as Database or List.If range_lookup is TRUE,the values in the first column of table_array must be placed in ascending order:.,-2,-1,0,1,2,.,A-Z,FALSE,TRUE;otherwise VLOOKUP may not give the correct value.If range_lookup is FALSE,table_array does not need to be sorted.You can put the values in ascending order by choosing the SortSort command from the DataData menu and selecting AscendingAscending.The values in the first column of table_array can be text,numbers,or logical values.Uppercase and lowercase text are equivalent.Col_index_num is the column number in table_array from which the matching value must be returned.A col_index_num of 1 returns the value in the first column in table_array;a col_index_num of 2 returns the value in the second column in table_array,and so on.If col_index_num is less than 1,VLOOKUP returns the#VALUE!error value;if col_index_num is greater than the number of columns in table_array,VLOOKUP returns the#REF!error value.Range_lookup is a logical value that specifies whether you want VLOOKUP to find an exact match or an approximate match.If TRUE or omitted,an approximate match is returned.In other words,if an exact match is not found,the next largest value that is less than lookup_value is returned.If FALSE,VLOOKUP will find an exact match.If one is not found,the error value#N/A is returned.RemarksRemarksIf VLOOKUP cant find lookup_value,and range_lookup is TRUE,it uses the largest value that is less than or equal to lookup_value.If lookup_value is smaller than the smallest value in the first column of table_array,VLOOKUP returns the#N/A error value.If VLOOKUP cant find lookup_value,and range_lookup is FALSE,VLOOKUP returns the#N/A value.ExampleExampleThe example may be easier to understand if you copy it to a blank worksheet.How?1.Create a blank workbook or worksheet.2.Select the example in the Help topic.Do not select the row or column headers.Selecting an example from Help3.Press CTRL+C.4.In the worksheet,select cell A1,and press CTRL+V.5.To switch between viewing the results and viewing the formulas that return the results,press CTRL+(grave accent),or on the ToolsTools menu,point to FormulaFormula AuditingAuditing,and then click FormulaFormula AuditingAuditing ModeMode.The example uses values for air at 1 atm pressure.A AB BC C1 1DensityDensityViscositViscosity yTemperatTemperatureure2 20.4573.555003 30.5253.254004 40.6162.933005 50.6752.752506 60.7462.572007 70.8352.381508 80.9462.171009 91.091.955010101.291.710FormulaFormulaDescriptDescriptionion(Result)(Result)#N/ALooks up1 incolumnA,andreturnsthevaluefromcolumn Bin thesame row(2.17)#N/ALooks up1 incolumnA,andreturnsthevaluefromcolumn Cin thesame row(100)#N/ALooks up0.746 incolumnA.Becausethere isno exactmatch incolumnA,anerror isreturned(#N/A)#N/ALooks up0.1 incolumnA.Because0.1 islessthan thesmallestvalue incolumnA,anerror isreturned(#N/A)#N/ALooks up2 incolumnA,andreturnsthevaluefromcolumn Bin thesame row(1.71)Searches for a value in the leftmost column of a table,and then returns a value in the same row from a column you specify in the table.Use VLOOKUP instead of HLOOKUP when your comparison values are located in a column to the left of the data you want to find.Lookup_value is the value to be found in the first column of the array.Lookup_value can be a value,a reference,or a text string.Table_array is the table of information in which data is looked up.Use a reference to a range or a range name,such as Database or List.If range_lookup is TRUE,the values in the first column of table_array must be placed in ascending order:.,-2,-1,0,1,2,.,A-Z,FALSE,TRUE;otherwise VLOOKUP may not give the correct value.If range_lookup is FALSE,table_array does not need to be sorted.You can put the values in ascending order by choosing the SortSort command from the DataData menu and selecting AscendingAscending.The values in the first column of table_array can be text,numbers,or logical values.Col_index_num is the column number in table_array from which the matching value must be returned.A col_index_num of 1 returns the value in the first column in table_array;a col_index_num of 2 returns the value in the second column in table_array,and so on.If col_index_num is less than 1,VLOOKUP returns the#VALUE!error value;if col_index_num is greater than the number of columns in table_array,VLOOKUP returns the#REF!error value.Range_lookup is a logical value that specifies whether you want VLOOKUP to find an exact match or an approximate match.If TRUE or omitted,an approximate match is returned.In other words,if an exact match is not found,the next largest value that is less than lookup_value is returned.If FALSE,VLOOKUP will find an exact match.If one is not found,the error value#N/A is returned.If VLOOKUP cant find lookup_value,and range_lookup is TRUE,it uses the largest value that is less than or equal to lookup_value.If lookup_value is smaller than the smallest value in the first column of table_array,VLOOKUP returns the#N/A error value.If VLOOKUP cant find lookup_value,and range_lookup is FALSE,VLOOKUP returns the#N/A value.2.Select the example in the Help topic.Do not select the row or column headers.5.To switch between viewing the results and viewing the formulas that return the results,press CTRL+(grave accent),or on the ToolsTools menu,point to FormulaFormula AuditingAuditing,and then click FormulaFormula AuditingAuditing ModeMode.Searches for a value in the leftmost column of a table,and then returns a value in the same row from a column you specify in the table.Use VLOOKUP instead of HLOOKUP when your comparison values are located in a column to the left of the data you want to find.If range_lookup is TRUE,the values in the first column of table_array must be placed in ascending order:.,-2,-1,0,1,2,.,A-Z,FALSE,TRUE;otherwise VLOOKUP may not give the correct value.If range_lookup is FALSE,table_array does not need to be sorted.Col_index_num is the column number in table_array from which the matching value must be returned.A col_index_num of 1 returns the value in the first column in table_array;a col_index_num of 2 returns the value in the second column in table_array,and so on.If col_index_num is less than 1,VLOOKUP returns the#VALUE!error value;if col_index_num is greater than the number of columns in table_array,VLOOKUP returns the#REF!error value.Range_lookup is a logical value that specifies whether you want VLOOKUP to find an exact match or an approximate match.If TRUE or omitted,an approximate match is returned.In other words,if an exact match is not found,the next largest value that is less than lookup_value is returned.If FALSE,VLOOKUP will find an exact match.If one is not found,the error value#N/A is returned.5.To switch between viewing the results and viewing the formulas that return the results,press CTRL+(grave accent),or on the ToolsTools menu,point to FormulaFormula AuditingAuditing,and then click FormulaFormula AuditingAuditing ModeMode.Searches for a value in the leftmost column of a table,and then returns a value in the same row from a column you specify in the table.Use VLOOKUP instead of HLOOKUP when your comparison values are located in a column to the left of the data you want to find.If range_lookup is TRUE,the values in the first column of table_array must be placed in ascending order:.,-2,-1,0,1,2,.,A-Z,FALSE,TRUE;otherwise VLOOKUP may not give the correct value.If range_lookup is FALSE,table_array does not need to be sorted.Col_index_num is the column number in table_array from which the matching value must be returned.A col_index_num of 1 returns the value in the first column in table_array;a col_index_num of 2 returns the value in the second column in table_array,and so on.If col_index_num is less than 1,VLOOKUP returns the#VALUE!error value;if col_index_num is greater than the number of columns in table_array,VLOOKUP returns the#REF!error value.Range_lookup is a logical value that specifies whether you want VLOOKUP to find an exact match or an approximate match.If TRUE or omitted,an approximate match is returned.In other words,if an exact match is not found,the next largest value that is less than lookup_value is returned.If FALSE,VLOOKUP will find an exact match.If one is not found,the error value#N/A is returned.Col_index_num is the column number in table_array from which the matching value must be returned.A col_index_num of 1 returns the value in the first column in table_array;a col_index_num of 2 returns the value in the second column in table_array,and so on.If col_index_num is less than 1,VLOOKUP returns the#VALUE!error value;if col_index_num is greater than the number of columns in table_array,VLOOKUP returns the#REF!error value.Range_lookup is a logical value that specifies whether you want VLOOKUP to find an exact match or an approximate match.If TRUE or omitted,an approximate match is returned.In other words,if an exact match is not found,the next largest value that is less than lookup_value is returned.If FALSE,VLOOKUP will find an exact match.If one is not found,the error value#N/A is returned.Col_index_num is the column number in table_array from which the matching value must be returned.A col_index_num of 1 returns the value in the first column in table_array;a col_index_num of 2 returns the value in the second column in table_array,and so on.If col_index_num is less than 1,VLOOKUP returns the#VALUE!error value;if col_index_num is greater than the number of columns in table_array,VLOOKUP returns the#REF!error value.