波峰焊参数.xls
波峰焊参数技技术术参参数数 SpecificationsSpecifications规规格格表表 SpecificationsSpecifications NSM-350/450NSM-350/450外形尺寸 Dimension:L*W*H(mm)4430 X 1620 X 1710重量 Weight(kg)Approx.2300kg电源 Power Supply3P5W,380/220V 50Hz 63A启动功率 Startup Power(kw)26kw正常运行功率 Operation Power Consumption12kw控制系统 Control System电脑(computer)+PLC喷喷雾雾系系统统 SpraySpray SystemSystem传动方式 Transmission MethedStep motor 步进马达喷雾气压 Spray Pressure 0.25Mpa-0.4Mpa助焊剂流量控制 Flux flow 10-100ml/min助焊剂自动添加 Auto Fill Fluxstandard抽风方式 Exhaust Methed上/下抽风 Up&down exhaust抽风管直径 Exhaust Ducting Diameter200mm排风量 Exhaust Capacity25m3/min预预热热系系统统 PreheatingPreheating SystemSystem预热方式 Preheating Mode微热风/红外(选项)Hot air/IR tube is option温度控制方式 Control ModePID+SSR预热区数量 Preheating Zoon Number3预热区长度 Preheating Length1800MM预热温度控制范围 Preheating Temp.Room Temperature-250预热升温时间 Warm-up Time(min)Approx.15min(setting 150)热风马达 Blow MotorStandard运输系统宽度范围 PCB Width(L X W)(mm)Min:80 x60;Max:500 x450PCB传送方向 Conveyor Direction左到右(LR)ST;右到左(RL)OPT运输速度范围 Conveyor Speed(mm/min)0-2000运输高度 Conveyor Height(mm)75020允许PCB元件高度 Available ComponentHeight(mm)上 Top 120(option 160)/下 Bottom 15速度控制方式 Conveyor Speed ControlMode变频器闭环无级调速 Closed loop爪片 Finger双排链快换双钩爪(标配)Quick-change finger(standard)钛片鸭嘴爪(选配)Titanium duck jaw finger(option)弹簧鸭嘴爪(选配)Spring duck jaw finger(option)金属鸭嘴爪(选配)Metallic duck jaw finger(option)树脂鸭嘴爪(选配)Resinous duck jaw finger(option)导轨宽度调整方式 Conveyor width control自动(Auto)导轨角度 Conveyor Angle47焊接系统 Soldering system锡炉工作方式 Solder Pot style电磁式 Electromagnetic锡炉材质 Solder Pot Material全钛 Full Titanium(标配 ST)波峰调节方式 Wave Height Adjust电脑数字控制 Digital control by PC锡炉发热管功率 heater power380VAC 10KW锡炉最高温度 solder pot temperature300锡炉容量 solder pot capacitylead-free 450/550kg波峰驱动功率 wave drive power2kw 220v锡炉升温时间 solder por warm-uptemperatureApprox.180min(setting 250)炉温控制方式 temperature control modePID+SSR冷却系统 cooling system冷却方式 cooling method强制风冷/冷风机(选配)forced air/air chiller(option)其他 other洗爪 finger cleaning system毛刷 brush回程抬高 return trip liftingstandard选配 option中央支撑 centrer supportoption超声波喷雾 j-sonic ultrasonic sprayoption上层预热 top heatingoptionUPS保护 ups protectionoption氮气系统 nitrogen deviceoption接驳压刀 feeder knifeoption The bottom height is 11mm for machine with Nitrogen氮气机板底允许高度为11mm.MS-350/450MS-350/450KK-350KK-3504430 X 1620 X 17104430 X 1620 X 1710Approx.2300kgApprox.2000kg3P5W,380/220V 50/60Hz 63A3P5W,380/220V 50/60Hz 63A26kw22.5kw12kw12kwStep motor 步进马达Air cylinder 汽缸传动红外 IR tubeN/A上 Top 120/下 Bottom 15电脑(computer)+PLC0.25Mpa-0.4Mpa10-100ml/minstandard上/下抽风 Up&down exhaust200mm25m3/min微热风/红外(选项)Hot air/IR tube is optionPID+SSR31800MMRoom Temperature-250Approx.15min(setting 150)StandardMin:80 x60;Max:500 x450左到右(LR)ST;右到左(RL)OPT0-200075020上 Top 120(option 160)/下 Bottom 15手动(Manual)机械式 Motor drive全钛(选配)Full Titanium (Option)铸铁陶瓷(标配)cast iron&enamel(ST)380VAC 12KW380VAC 12KWlead-free 500/650kglead-free430kg;Tin lead 500kg1/2HP X 2 3P 220VAC强制风冷forced air变频器闭环无级调速 Closed loop双排链快换双钩爪(标配)Quick-change finger(standard)钛片鸭嘴爪(选配)Titanium duck jaw finger(option)弹簧鸭嘴爪(选配)Spring duck jaw finger(option)金属鸭嘴爪(选配)Metallic duck jaw finger(option)树脂鸭嘴爪(选配)Resinous duck jaw finger(option)自动(Auto)47电脑数字控制 Digital control by PC300Approx.180min(setting 250)PID+SSR强制风冷/冷风机(选配)forced air/air chiller(option)optionN/AoptionN/AoptionoptionoptionN/Aoptionoption毛刷 brushstandardoption
