CTN180-P规格书.pdf
深圳市鼎科实业有限公司深圳市鼎科实业有限公司 SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:(规格书)(规格书)SPECIFICATION THESE SPECIFICATION ARE THE PROPERTY OF SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES WITHOUT PERMISSION.Model No.:Model No.:CTN180-P CTN180-P DATE PREPAREDDATE PREPARED CHECKED APPROVED CHECKED APPROVED 2008-10-10 王理辉 王理辉 李昌美 赵颜辉 Document No.:Document No.:CTN180-P CTN180-P 1 OF 11 客户名称客户名称/CUSTOMER:客户代码客户代码/CUSTOMER CODE:承承 认认 书书 SPECIFICATION FOR APPROVAL 产产 品品 名名 称称 DESCRIPION:LCD POWER SYSTEM LCD POWER SYSTEM 客客 户户 型型 号号 CUSTOMER MODEL:客客 户户 编编 号号 CUSTOMER CODE:承制方承制方 型号型号 MANUFACTURER MODEL:CTN180-P 版版 本本 EDITION:日日 期期 DATE:使用方确认使用方确认 CUSTOMER APPOVED 承制方确认承制方确认 MANUFACTURER 深 深 深 鼎 鼎 鼎 鼎 有 有 有 司深 深 深 鼎 鼎 鼎 鼎 有 有 有 司?SSSSSSSS?TOP-TSTS?TSTTSTTTTT?TO.,TTT?SSSSSSSS?TOP-TSTS?TSTTSTTTTT?TO.,TTT?TAAA?3F,WWWW?WW?W-8?8888A888,S888-TWT8?T8A8WWT8T8?PTTT?TW8WT8T8,?ST8W8T8,?P.T.T888T?STP?TOTSAZZ8ZZ7?采购部采购部 PURCHING 研发部研发部 R/D 品质部品质部 QUALITY 有司签署有司签署 COMPANY SIGN 拟制拟制 DRAWING审核审核 CHECKED 批准批准 RATIFY 王理辉王理辉 李昌美李昌美 赵颜辉赵颜辉 有司签署有司签署 COMPANY SIGN?承制方:深深深鼎鼎鼎鼎有有有司 MANUFACTURER:承制方:深深深鼎鼎鼎鼎有有有司 MANUFACTURER:SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD 地址：深深深南山区高新技术产鼎园中区 M-8 栋西座三楼 Add:3/F,West of M-8building,High-tech industrial Park Central,Nanshan,Shenzhen 邮编:518057 ZIP CODE:518057 电话 TEL:(0755)26741834 26742425 26740460 传真 FAX:(0755)26740494 SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD 地址：深深深南山区高新技术产鼎园中区 M-8 栋西座三楼 Add:3/F,West of M-8building,High-tech industrial Park Central,Nanshan,Shenzhen 邮编:518057 ZIP CODE:518057 电话 TEL:(0755)26741834 26742425 26740460 传真 FAX:(0755)26740494 深圳市鼎科实业有限公司深圳市鼎科实业有限公司 SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:(规格书)(规格书)SPECIFICATION THESE SPECIFICATION ARE THE PROPERTY OF SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES WITHOUT PERMISSION.Model No.:Model No.:CTN180-P CTN180-P DATE PREPAREDDATE PREPARED CHECKED APPROVED CHECKED APPROVED 2008-10-10 王理辉 王理辉 李昌美 赵颜辉 Document No.:Document No.:CTN180-P CTN180-P 2 OF 11 Revision History 版本Revision 日期 Date 修改内容Modify item 修改原因 Modify Reason修改者 Prepared 确认者 Approved 备注 Note 深圳市鼎科实业有限公司深圳市鼎科实业有限公司 SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:(规格书)(规格书)SPECIFICATION THESE SPECIFICATION ARE THE PROPERTY OF SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES WITHOUT PERMISSION.Model No.:Model No.:CTN180-P CTN180-P DATE PREPAREDDATE PREPARED CHECKED APPROVED CHECKED APPROVED 2008-10-10 王理辉 王理辉 李昌美 赵颜辉 Document No.:Document No.:CTN180-P CTN180-P 3 OF 11 Section 目录 Section 目录 1.Power supply overview 电源性能指标 1.Power supply overview 电源性能指标 1.1 Input Electrical Characteristics Overview（输入特性）（输入特性）1.2 Output Electrical Characteristics Overview（输出特性）（输出特性）1.2.1 Output Voltage,Current&Regulation.（输出电压电流调整率）（输出电压电流调整率）1.2.2 DC Output Ripple&Noise.（输出纹波和噪声）（输出纹波和噪声）1.2.3 Output Transient Response.（输出动态响应）（输出动态响应）1.2.4 DC Output Hold-Up Time.（输出保持时间）（输出保持时间）1.2.4 DC Output Overshoot At Turn On&Turn Off.（输出超调）（输出超调）1.2.6 DC output voltage rise time（输出上升时间）（输出上升时间）1.3 Remote On/Off Control：（遥控功能）：（遥控功能）1.4 Protection:（保护功能）（保护功能）1.4.1 DC output Over Voltage Protection.（输出过压保护）（输出过压保护）1.4.2 DC Output Over current Protection.（输出过流保护）（输出过流保护）1.4.3 DC Output Short Circuit Protection.（输出短路保护）（输出短路保护）1.4.4 Reset After Shutdown.（保护功能复位）（保护功能复位）2.Isolation 绝缘性能 3.Safety 安全规格 4.EMC 电磁兼容性 4.1 EMI（电磁干扰）4.2 EMS2.Isolation 绝缘性能 3.Safety 安全规格 4.EMC 电磁兼容性 4.1 EMI（电磁干扰）4.2 EMS（电磁抗扰）5.Environmental Requirement 环境（电磁抗扰）5.Environmental Requirement 环境 5.1 Temperature（环境温度）5.2 Humidity（环境湿度）5.1 Temperature（环境温度）5.2 Humidity（环境湿度）5.3 Altitude（海拔高度）5.3 Altitude（海拔高度）5.4 Cooling Method（冷却方式）5.5 Vibration（振动耐受）5.4 Cooling Method（冷却方式）5.5 Vibration（振动耐受）5.6 Impact（冲击耐受）6.Dimension（物理尺寸）5.6 Impact（冲击耐受）6.Dimension（物理尺寸）7.7.Weight（重量）Weight（重量）8.Pin Connection(连接器脚位定义)9.Power Supply mounting（安装尺寸）8.Pin Connection(连接器脚位定义)9.Power Supply mounting（安装尺寸）10.Mount Method(装配注意事项)(装配注意事项)11.Notice(注意事项)注意事项)深圳市鼎科实业有限公司深圳市鼎科实业有限公司 SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:(规格书)(规格书)SPECIFICATION THESE SPECIFICATION ARE THE PROPERTY OF SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES WITHOUT PERMISSION.Model No.:Model No.:CTN180-P CTN180-P DATE PREPAREDDATE PREPARED CHECKED APPROVED CHECKED APPROVED 2008-10-10 王理辉 王理辉 李昌美 赵颜辉 Document No.:Document No.:CTN180-P CTN180-P 4 OF 11 1.Power Supply Overview 电性能指标电性能指标:1.1 Table 1 Input Electrical Characteristics Overview（输入特性）（输入特性）Normal voltage range标称输入100240V Frequency range 频率范围50Hz/60Hz5%Max input ac current 满载输入电流 3.0Amax at full load condition Inrush current(cold start)浪涌电流 50Atyp peak,120V;100Atyp peak,220VEfficiency(full load)效率 83%min at 100V;86%min at 220V Harmonic current 谐波电流Meet EN60065-2002/IEC61000-3-2 class D Leakage Current 泄漏电流Less Than 0.5mA,230V input Standby Power Loss 待机功耗1W 240V input,Output current50mA,Input Fuse 输入保险T5A/250Vac 1.2 Output Electrical Characteristics Overview（输出特性）（输出特性）1.2.1 Table 2 Output Voltage,Current&Regulation.（输出调整率）（输出调整率）Output Voltage输出电压 Regulation 调整率 Min.current最小电流 Rated current 额定电流 Peak current or power峰值电流或功率+V1(+24V)+V15%0.2 A 0.1A-6A +V2(+12V)+V25%0.3 A 0.1A-3A 160W+5.0V +5.0V5%0.1 A 0.1A-3A+5.0V(STB)+5.0V5%0.05 A 0.1A-1A 20W Note:*The peak current or power should be test at other of dc output at Rated load,And the peak current pulse width within 100ms 峰值电流或功率的测试是在其它额定负载时测试，且脉宽小于 100 毫秒。1.2.2 Table 3 DC Output Ripple&Noise.（输出纹波和噪声）（输出纹波和噪声）Output Voltage Ripple&Noise(Max.)+V1(+24V)240mVp-p25;350mVp-p-10+V2(+12V)120mVp-p25;200mVp-p-10+5.0V 50mVp-p25;200mVp-p-10;+5.0V(STB)60mVp-p25;200mVp-p-10;150mVpp when STB Note:1)Measurements shall be made with an oscilloscope with 20MHz bandwidth.示波器须设置在 20 兆赫兹带宽 2)Outputs shall be bypassed at the connector with a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor to simulate system loading.输出须并联 0.1uF 的陶瓷电容和 10uF 的电解电容来模拟负载 深圳市鼎科实业有限公司深圳市鼎科实业有限公司 SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:(规格书)(规格书)SPECIFICATION THESE SPECIFICATION ARE THE PROPERTY OF SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES WITHOUT PERMISSION.Model No.:Model No.:CTN180-P CTN180-P DATE PREPAREDDATE PREPARED CHECKED APPROVED CHECKED APPROVED 2008-10-10 王理辉 王理辉 李昌美 赵颜辉 Document No.:Document No.:CTN180-P CTN180-P 5 OF 11 1.2.3 Output Transient Response.（输出动态响应）（输出动态响应）Table 4.Test condition.测试条件 Voltage Tolerance Limit Slew Rate Load Change 5.0V/5.0VS5%24V/12V/10%0.2A/uS Min.to 50%load and 50%to Max load All output10%0.2A/uS Min.load to Max load Note:Transient response measurements shall be made with a load changing repetition rate of 50Hz to 10kHz.以 5010KHz 的频率跳变负载来测试。1.2.4 Table 5 DC Output Hold-Up Time.（输出保持时间）（输出保持时间）Output Voltage 120V input 220V input+V1(+24V)10 mS 10 mS+V2(+12V)10 mS 10 mS+5.0V 10mS 10 mS+5.0V(STB)10 mS 10 mS Note:All of dc output at full load.所有输出带满载 1.2.5 Table 6 DC Output Overshoot At Turn On&Turn Off.（输出超调）（输出超调）Over shoot voltage(V)超调电压 Output ChannelOutput(V)Turn on开机 Turn off关机+V1(+24V)+24V 10%10%+V2(+12V)+12V 10%10%+5.0V +5.0V 10%10%+5.0V(STB)+5.0V 10%10%Note:All of dc output current from Min.to Max.测试时负载范围：最小到最大 1.2.6 Table 7 DC output voltage rise time（输出上升时间）（输出上升时间）Output Voltage 120V input&Full Load 220V input&Full Load+V1(+24V)100mS 100mS+V2(+12V)100 mS 100 mS+5.0V 100 mS 100mS+5.0V(STB)100 mS 100 mS Note:The output voltages shall rise from10%to 90%of their output voltage.输出从 10%上升到 90%的时间 深圳市鼎科实业有限公司深圳市鼎科实业有限公司 SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:(规格书)(规格书)SPECIFICATION THESE SPECIFICATION ARE THE PROPERTY OF SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES WITHOUT PERMISSION.Model No.:Model No.:CTN180-P CTN180-P DATE PREPAREDDATE PREPARED CHECKED APPROVED CHECKED APPROVED 2008-10-10 王理辉 王理辉 李昌美 赵颜辉 Document No.:Document No.:CTN180-P CTN180-P 6 OF 11 1.3 Remote On/Off Control：（遥控功能）（遥控功能）The power supply DC outputs(without+5.0Vsb)shall be enable with an active-high TTL(2.5V/2.0mA)-compatible signal(Ps-on).The+5.0Vsb is on whenever the AC power is present.除 5.0Vsb 外，其余输出受控于一个 TTL 电平兼容的信号（Ps-on2.5V/2.0mA）,5.0Vsb 上电就存在。*When Ps-on is pulled to TTL high,the DC outputs are to be enabled.Ps-on 高电平，打开输出*When Ps-on is pulled to TTL low or open circuit,the DC outputs are to be disabled.Ps-on 低电平，关闭输出 Table 8.Ps-on Signal Comments Outputs Ps-on-high 2.5V&2.0mA(source)Output Ps-on-low 0.5V X Ps-on-open-X 1.4 Protection:（保护功能）（保护功能）1.4.1 Table 9 DC output Over Voltage Protection.（输出过压保护）输出过压保护）Output Voltage TYP.Over Voltage Comments+V1(+24V)28V Power supply latch into shutdown state 输出锁机+V2(+12V)15V Power supply latch into shutdown state 输出锁机+5V 7V 电源无输出+5.0V(STB)7V 电源无输出 Note:The power supply shall be test at max AC voltage(264V)and min load or no load.应该在最大交流输入电压 264 伏和轻载、空载下测试。1.4.2 Table 10 DC Output Over current Protection.（输出过流保护）（输出过流保护）Note:*The over current protection should be test at other of dc output at Rated load 过流保护测试是在其它额定负载时测试过流保护测试是在其它额定负载时测试.Output Voltage Over Current Comments+V1(+24V)6Atyp*Power supply latch into shutdown state 输出锁机+V2(+12V)3Atyp*Power supply latch into shutdown state 输出锁机+5V 4Atyp*Hiccup尝试重复启动+5.0VSTB 1.5Atyp*Hiccup尝试重复启动 深圳市鼎科实业有限公司深圳市鼎科实业有限公司 SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:(规格书)(规格书)SPECIFICATION THESE SPECIFICATION ARE THE PROPERTY OF SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES WITHOUT PERMISSION.Model No.:Model No.:CTN180-P CTN180-P DATE PREPAREDDATE PREPARED CHECKED APPROVED CHECKED APPROVED 2008-10-10 王理辉 王理辉 李昌美 赵颜辉 Document No.:Document No.:CTN180-P CTN180-P 7 OF 11 1.4.3 Table 11 DC Output Short Circuit Protection.（输出短路保护）（输出短路保护）Output Voltage Comments+V1(+24V)Shutdown 关机+V2(+12V)Shutdown 关机*+5V Shutdown 关机*+5.0V(STB)Hiccup尝试重复启动 Note:*The Short Circuit protection should be test at other of dc output at Rated load 短路保护测试是在其它额定负载时测试短路保护测试是在其它额定负载时测试.1.4.4 Reset After Shutdown.（保护功能复位）（保护功能复位）Recycle the ps-on signal,the power supply will restart after the fault removed，But+5V、+5.0V(STB)output over voltage cant be reset.故障去除后，关掉 Ps-on 信号再打开，电源即可恢复。+5V、+5.0V(STB)过压后不可恢复。2.Isolation（绝缘性能）（绝缘性能）2.1 Table 12（绝缘阻抗）（绝缘阻抗）Input To Output DC500V 50Mmin(at room temperature)Input To FG DC500V 50Mmin(at room temperature)Output To FG Non Isolated 2.2 Table 13（绝缘耐压）（绝缘耐压）Input To Output 3000Vac 50Hz 1minute 10mA Input To FG 1500Vac 50Hz 1minute 10mA Output To FG Non Isolated Note:Open FG and Output return.交流地和输出负极要断开。3.3.Safety （安全规格）（安全规格）The power supply shall compliance with the following Criterion:The power supply shall compliance with the following Criterion:电源安全性满足下列标准 电源安全性满足下列标准 1)UL60950 2)EN60950 3)3)GB4943-1995 深圳市鼎科实业有限公司深圳市鼎科实业有限公司 SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:(规格书)(规格书)SPECIFICATION THESE SPECIFICATION ARE THE PROPERTY OF SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES WITHOUT PERMISSION.Model No.:Model No.:CTN180-P CTN180-P DATE PREPAREDDATE PREPARED CHECKED APPROVED CHECKED APPROVED 2008-10-10 王理辉 王理辉 李昌美 赵颜辉 Document No.:Document No.:CTN180-P CTN180-P 8 OF 11 4.4.EMC （电磁兼容性）（电磁兼容性）4.1 EMI（电磁干扰）（电磁干扰）The power supply shall compliance with the following Criterion:The power supply shall compliance with the following Criterion:电源电磁干扰满足下列规则：电源电磁干扰满足下列规则：1)1)Conduction Emission:Conduction Emission:（传导干扰度）（传导干扰度）*EN55022,CLASS B*GB9254,CLASS B*FCC PART15 CLASS B 2)Radiated Emission:2)Radiated Emission:（辐射干扰度）（辐射干扰度）*EN55022,CLASS B*GB9254,CLASS B*FCC PART15 CLASS B 4.2 EMS（电磁抗扰）（电磁抗扰）The power supply shall compliance with the following Criterion:The power supply shall compliance with the following Criterion:电源电磁抗扰满足下列规则：电源电磁抗扰满足下列规则：1)ESD 1)ESD（静电抗扰度）（静电抗扰度）*GB17626.2-1998/IEC61000-4-2 2)EFT 2)EFT（脉冲群抗扰度）（脉冲群抗扰度）*GB17626.4-1998/IEC61000-4-4 3KV 3)Surge 3)Surge （雷击浪涌）（雷击浪涌）*GB17626.5-1998/IEC61000-4-5 1.5KV/3KV 5.Environmental Requirement （工作环境）（工作环境）5.1 Temperature（环境温度）（环境温度）*Operating:0 to+45.*Store:-20 to+80.5.2 Humidity（环境湿度）（环境湿度）*Operating:From 10%to90%relative humidity(non-condensing).*Store:From 5 to 95%relative humidity(non-condensing).5.3 Altitude （海拔高度）（海拔高度）*Operating:to10,000 ft.*Store:to 20,000ft.5.4 Cooling Method（冷却方式）（冷却方式）*Ventilation cooling.自然冷却 5.5 Vibration（振动耐受）5.5 Vibration（振动耐受）*10-55Hz,19.6m/s(2G),3minutes period,60minutes each along X,Y and Z axis.5.6 Impact（冲击耐受）（冲击耐受）*49m/s(5G),11ms,once each X,Y and Z axis.深圳市鼎科实业有限公司深圳市鼎科实业有限公司 SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:(规格书)(规格书)SPECIFICATION THESE SPECIFICATION ARE THE PROPERTY OF SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES WITHOUT PERMISSION.Model No.:Model No.:CTN180-P CTN180-P DATE PREPAREDDATE PREPARED CHECKED APPROVED CHECKED APPROVED 2008-10-10 王理辉 王理辉 李昌美 赵颜辉 Document No.:Document No.:CTN180-P CTN180-P 9 OF 11 6.Dimension（物理尺寸）（物理尺寸）*192mm X 130mm X30mm(长 L*宽 W*高 H).7.Weight（重量）（重量）*500g 8.Pin Connection(连接器脚位定义连接器脚位定义)Table 15 Pin-CON5 Connection And Function NO.Pin Connection Function 5.6.7.8 GND+24VDC RETURN 1.2.3.4 +V1+24VDC OUTPUT Note:CON103-XH CONNEETION,TYPE:pitch2.5mm Table 16 Pin-CON3Connection And Function NO.Pin Connection Function 3.4 GND+24VDC RETURN 1.2 Vaudio+24VDC OUTPUT Note:CON103-XH CONNEETION,TYPE:pitch2.5mm Table 17 Pin-CON4 Connection And Function NO.Pin Connection Function 1.2 GND+5V+5VSB+12VDC RETURN 3.4+5V+5VDC OUTPUT 5 STB SMPS ON/OFF CONTROL(ON=HIGH)6+5VSB STANDBY(+5.0VDC)OUTPUT 7.8+5V+5VDC OUTPUT 9.10.11 GND+5V+5VSB+12VDC RETURN 12.13+12V+12VDC OUTPUT Note:CON5-VH CONNEETION,TYPE:pitch2.5mm Table 18 Pin-CON1 Connection And Function NO.Pin Connection Function AC-L AC INPUT LINE NC NC AC-N AC INPUT NUTURE Note:CON1-VH CONNEETION,TYPE:pitch3.96mm 深圳市鼎科实业有限公司深圳市鼎科实业有限公司 SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD.DESCRIPTION:(规格书)(规格书)SPECIFICATION THESE SPECIFICATION ARE THE PROPERTY OF SHENZHEN TOP-TECH INDUSTRIAL CO.,LTD AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES WITHOUT PERMISSION.Model No.:Mod
