汽车焊接件技术要求中英文(共2页).docx

《汽车焊接件技术要求中英文(共2页).docx》由会员分享，可在线阅读，更多相关《汽车焊接件技术要求中英文(共2页).docx（2页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、精选优质文档-倾情为你奉上技术要求1.冲压技术条件按JB4380执行2.未注尺寸公差按ZBT04006.3执行3.去毛刺、锐边4.详细形状见3D数据5.焊接质量符合标准GB/T19867NOTE1.The stamping technology according to JB4380.2.Unmarked tolerances according to ZBT04006.3.3.No burrs,blunt-edged.4.Find more details about shapes in 3D datas.5.Weld quality：GB/T19867.技术要求1.冲压技术条件按JB438

2、0执行2.未注尺寸公差按ZBT04006.3执行3.去毛刺、锐边4.详细形状见3D数据NOTE1.The stamping technology according to JB4380.2.Unmarked tolerances according to ZBT04006.3.3.No burrs,blunt-edged.4.Find more details about shapes in 3D datas.技术要求1.冲压技术条件按JB4380执行2.未注尺寸公差按ZBT04006.3执行3.去毛刺、飞边。4.详细形状见3D数据NOTE1.The stamping technology c

3、onditions according to JB43802.Did not note the dimensional tolerances according to ZBT04006.33.No burr or flanging.4.Shown on 3D date in detail.技术要求1.冲压技术条件按JB4380执行2.未注尺寸公差按ZBT04006.3执行3.去毛刺、锐边4.详细形状见3D数据5.焊接质量符合标准GB/T19867NOTE1.The stamping technology conditions according to JB4380.2.Did not note

4、 the dimensional tolerances according to ZBT04006.3.3.No burr or flanging.4.Shown on 3D date in detail5.Weld quality：GB/T19867.1.The stamping technology conditions according to JB4380.2.Did not note the dimensional tolerances according to ZBT04006.3.3.No burr or flanging.4.Shown on 3D date in detail

5、5.Weld quality：GB/T19867技术要求1.一般公差符合 GB/T 13914。2.表面无起皱、划痕、擦伤等等。NOTE1.General tolerances in accordance with GB/T 13914.2.No wrinkling, no scratch of the surface.技术要求1.一般公差符合 GB/T 13914。2.表面无起皱、划痕、擦伤等。3.详细形状见3D数据。NOTE1.General tolerances applies the GB/T 13914.2.No wrinkling, no scratch of the surface.3.Shown on 3D date in detail.技术要求1.一般公差符合 GB/T 13914。2.表面无起皱、划痕、擦伤等。3.详细形状见3D数据。4.焊接质量符合标准：GB/T19867。NOTE1.General tolerances applies the GB/T 13914.2.No wrinkling, no scratch of the surface.3.Shown on 3D date in detail.4.Weld quality：GB/T 19867.专心-专注-专业