1米跌落实验(共6页).doc

《1米跌落实验(共6页).doc》由会员分享，可在线阅读，更多相关《1米跌落实验(共6页).doc（6页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、精选优质文档-倾情为你奉上1M DROP TEST1米跌落实验PURPOSE OF THE TEST实验目的:The purpose of this test is to measure the capacity of a mobile phone or battery to resist being dropped repeatedly onto concrete.实验目的是检测移动电话及电池抗反复跌落于混凝土上的能力Date日期Version版本Comments备注2006-8-11.0New Creation2007-3-22.01、 Company logo alteration 公司

2、LOGO变更。2、 Modification of General rules 修改规则概要。Function职位Name姓名Date日期Signature签名Written by拟定Quality Inspection Dept. Quality Technician质检部质量技术员熊小妹2007-02-12熊小妹 Verified by审核Quality Inspection Dept. Quality Project Manager质检部品质工程经理余李斌2007-02-12余李斌Validation Engineer测试认证部工程师仓征宇2007-02-12仓征宇Quality Ins

3、pection Dept Head质检部部长刘泽燕2007-2-25刘泽燕Validation Dept Head测试认证部部长黄辉雄2007-2-25黄辉雄Approved by批准Production Director生产总监吕小斌2007-2-25吕小斌Deputy Global Quality Director全球质量副总监刘月利2007-3-1刘月利专心-专注-专业1. GENERAL RULES 通用规则See the following specifications:General rules for the performance of mechanical qualifica

4、tion tests ref. TS-PR0080参考以下规范：TS-PR0080“机械性能实验的通用规则”Preparation of samples (see TS-PR0080):The results of this test may be influenced by the presence of adhesive: YES. The results of this test may be influenced by the presence of a coating: NO.(coating = paint, varnish, metal finish, film in mold,

5、 film insert molding, stamped printing, pad printing, hot stamping, etc.).样品的准备（见TS-PR0080）：此实验的结果可能受粘合剂的影响：是此实验的结果可能受涂层的影响：否（涂层包括：油漆、清漆、金属漆、模层、印刷层等。）2. PRINCIPLE 原则The test consists of dropping the samples a certain number of times onto a concrete surface and checking their mechanical and electrica

6、l functions.样机跌落于混凝土地面一定次数，检查它们的机械性能及功能。The test is applicable to China market, the size of LCD screen less than 2.4 or larger than 40% of the front surface.适用于中国市场，手机屏幕小于2.4,或不超过屏本身所在面积的40%；The number of drops performed on each sample will be: 16 drops for complete handsets (handsets fitted with th

7、eir batteries), 8 drops for batteries only.跌落次数： 整机跌16次（带电池）； 电池跌8次。3. NUMBER OF SAMPLES样品数量The recommended number of samples is 10.推荐的样品数量为10。4. EQUIPMENT设备The equipment consists of a concrete slab with the following characteristics: Dimensions = 50 cm x 50 cm min. Thickness = 2.5 cm min. The concr

8、ete surface must be horizontal and smooth(protrusions or indentations must be no greater than 1 mm high or deep). It may be painted. The slab must be placed flat on the floor. It must be wedged with rigid wedges so that it does not wobble.实验所用设备即水泥板有如下要求： 尺寸：最小50 cm x 50 cm； 厚度：最小2.5 cm； 水泥板必须保持水平和光

9、滑（凹凸程度不大于1mm）； 可以有涂层； 水泥板必须平放在地面； 必须用刚性楔形物固定而不会移动。Provided that the above characteristics are complied with, a concrete floor may be used.符合以上要求的水泥板才可使用。A device must be used to perform drops with the following characteristics: Drop height = 100 2 cm. The drop height is measured from the lowest poin

10、t of the sample.符合以下要求的装置才能用于实施跌落： 跌落高度=1002cm。 跌落高度从样机最低端算起。5. OPERATION METHOD操作方法5.1 规则概要General rulesConfiguration of samples: The handsets are fitted with a SIM card of any operator. The samples are tested with the handsets on and set to idle mode. Removable components must not be fixed to the

11、product by external means (battery, covers, etc.).样品配置： 手机中插入SIM卡，可以是任意运营商的； 手机开机并置于空闲模式； 不能借助外部方法固定可拆卸的部件（电池，合盖等）。Performance of drops: The samples must be dropped freely. The drops are performed manually. They are dropped on the 6 sides of the equivalent parallelepiped and on the 4 smallest edges

12、(the drawings and paragraphs below define the positions and names of each of these 10 drops). Before releasing it, the sample should be directed so as to try and make it fall on the side or edge required. It must be released with a minimum of interference (avoid any initial speed). If it does not fa

13、ll on the side or edge required, the drop performed will not be repeated and the sequence of drops continues as described in the paragraphs below.实施跌落时： 样品必须自由跌落，跌落人工完成； 要跌6个面和4条最短的边沿（下面的章节和图片定义了这10次跌落的位置和名称）； 释放样品前，样品要定向以保证能跌到所需的面或者边； 要保证释放时干扰最小（避免有初速度）； 如果某次跌落未跌到规定的边，此次跌落不重复进行，继续按下面章节描述的顺序跌落。 Chec

14、king: Intermediate checks are performed every 4 drops for test on complete handsets, and after each pair of drops for test on batteries only. Surface damage after drops not followed by a check, are not recorded neither sanctioned (Except the shell cracked).检查： 整机每跌落4次检查一次，电池每跌落2次检查一次。 跌落后的表面损伤不记录也不做

15、判定（壳裂除外）。5.2 Case of bar phone products对于“直板手机” Each sample is dropped 16 times.Drops are performed 4 by 4 in an order which follows a circular permutation from one sample to another: 每个样品跌落16次。I (edge)B (top)C (back)J (edge)跌落按4次/组4组的顺序进行，此顺序在不同样品间循环交替进行。F (left side)G (edge)H (edge)A (bottom)E (ri

16、ght side)D (front)Drop order n跌落顺序1-2-3-45-6-7-89-10-11-1213-14-15-16Sample n 1A-A-B-BC-C-D-DE-E-F-FG-H-I-JSample n 2B-B-C-CD-D-E-EF-F-G-HI-J-A-ASample n 3C-C-D-DE-E-F-FG-H-I-JA-A-B-BEtc.5.3 Case of batteries only对于单个电池 Each sample is dropped 8 times.Drops are performed in pairs in an order which fo

17、llows a circular permutation from one sample to another: 每个样品跌落8次。跌落按2次/组4组的顺序进行，此顺序在不同样品间循环交替进行。B (top)C (back)J (edge)F (left side)G (edge)H (edge)A (bottom)E (right side)D (front)I (edge)Drop order n跌落顺序1-23-45-67-8Sample n 1A-BC-DE-FG-HSample n 2C-DE-FG-HI-JSample n 3E-FG-HI-JA-BEtc.5.4 Case of

18、clam shell products对于“翻盖机”50% of the samples are tested closed, 50% of the samples are tested open:实验时样品一半合上翻盖，一半打开翻盖： Each sample tested closed is dropped 16 times.Drops are performed 4 by 4 in an order which follows a circular permutation from one sample to another: 合上翻盖的样品每个跌落16次。跌落按4次/组4组的顺序进行，此

19、顺序在不同样品间循环交替进行。B (top)C (back)J (edge)F (left side)G (edge)H (edge)A (bottom)E (right side)D (front)I (edge)Drop order n跌落顺序1-2-3-45-6-7-89-10-11-1213-14-15-16Sample n 1A-A-B-BC-C-D-DE-E-F-FG-H-I-JSample n 2B-B-C-CD-D-E-EF-F-G-HI-J-A-ASample n 3C-C-D-DE-E-F-FG-H-I-JA-A-B-BEtc. Each sample tested ope

20、n is dropped 16 times.Drops are performed 4 by 4 in an order which follows a circular permutation from one sample to another: 打开翻盖的样品每个跌落16次。跌落按4次/组4组的顺序进行，此顺序在不同样品间循环交替进行。F (left side)C (back)J (edge)B (top)G (edge)H (edge)A (bottom)E (right side)D (front)I (edge)Drop order n跌落顺序1-2-3-45-6-7-89-10-

21、11-1213-14-15-16Sample n 1A-A-B-BC-C-D-DE-E-F-FG-H-I-JSample n 2B-B-C-CD-D-E-EF-F-G-HI-J-A-ASample n 3C-C-D-DE-E-F-FG-H-I-JA-A-B-BEtc.5.5 Case of sliding products对于“滑盖机”50% of the samples are tested closed, 50% of the samples are tested open:实验时样品一半合上滑盖，一半打开滑盖： Each sample tested closed is dropped 1

22、6 times.Drops are performed 4 by 4 in an order which follows a circular permutation from one sample to another: 合上滑盖的样品每个跌落16次。跌落按4次/组4组的顺序进行，此顺序在不同样品间循环交替进行。B (top)C (back)J (edge)F (left side)G (edge)H (edge)A (bottom)E (right side)D (front)I (edge)Drop order n跌落顺序1-2-3-45-6-7-89-10-11-1213-14-15-

23、16Sample n 1A-A-B-BC-C-D-DE-E-F-FG-H-I-JSample n 2B-B-C-CD-D-E-EF-F-G-HI-J-A-ASample n 3C-C-D-DE-E-F-FG-H-I-JA-A-B-BEtc. Each sample tested open is dropped 16 times.Drops are performed 4 by 4 in an order which follows a circular permutation from one sample to another: 打开滑盖的样品每个跌落16次。跌落按4次/组4组的顺序进行，此

24、顺序在不同样品间循环交替进行。F (left side)C (back)J (edge)B (top)G (edge)H (edge)A (bottom)E (right side)D (front)(display)I (edge)(keypad)Drop order n跌落顺序1-2-3-45-6-7-89-10-11-1213-14-15-16Sample n 1A-A-B-BC-C-D-DE-E-F-FG-H-I-JSample n 2B-B-C-CD-D-E-EF-F-G-HI-J-A-ASample n 3C-C-D-DE-E-F-FG-H-I-JA-A-B-BEtc.6. CHE

25、CKS 检查The samples are checked and any damage is rated in compliance with the specification Checking handsets NOK123 sanctions ref. TS-PR0077检查样品并依据TS-PR0077“手机检查NOK123判定”对损伤进行判定。Checks on network simulators are not required.不需要连接网络仿真器检查。To fill in the heading of the sanctionsheet (Test Description p

26、aragraph): Total number of test:enter 16 for tests on complete handsets and 8 for tests on batteries only. Unit: enter drops.如下填写判定表的表头部分（“实验描述”部分）： “实验总次数”：对于整机实验填“16”，对于电池实验填“8”。 “单位”：填“跌落”。7. REPORT 完成报告See the following specifications:General rules for the performance of mechanical qualification tests ref. TS-PR0080.Checking handsets - NOK123 sanctions ref. TS-PR0077参考以下规范：TS-PR0080“机械性能测试的通用规则”TS-PR0077“手机检查NOK123判定”The test report must confirm the fact that the circular permutations on the order of drops have been correctly followed.实验报告中应该确认是否按照正确的顺序进行跌落的。