51单片机控制步进电机程序及硬件电路图(共4页).doc

《51单片机控制步进电机程序及硬件电路图(共4页).doc》由会员分享，可在线阅读，更多相关《51单片机控制步进电机程序及硬件电路图(共4页).doc（4页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、精选优质文档-倾情为你奉上 #include static unsigned int count; /计数static int step_index; /步进索引数，值为07static bit turn; /步进电机转动方向static bit stop_flag; /步进电机停止标志static int speedlevel; /步进电机转速参数，数值越大速度越慢，最小值为1，速度最快static int spcount; /步进电机转速参数计数void delay(unsigned int endcount); /延时函数，延时为endcount*0.5毫秒void gorun(); /

2、步进电机控制步进函数void main(void) count = 0; step_index = 0; spcount = 0; stop_flag = 0; P1_0 = 0; P1_1 = 0; P1_2 = 0; P1_3 = 0; EA = 1; /允许CPU中断 TMOD = 0x11; /设定时器0和1为16位模式1 ET0 = 1; /定时器0中断允许 TH0 = 0xFE; TL0 = 0x0C; /设定时每隔0.5ms中断一次 TR0 = 1; /开始计数 turn = 0; speedlevel = 2; delay(10000); speedlevel = 1; do

3、speedlevel = 2; delay(10000); speedlevel = 1; delay(10000); stop_flag=1; delay(10000); stop_flag=0; while(1); /定时器0中断处理 void timeint(void) interrupt 1 TH0=0xFE; TL0=0x0C; /设定时每隔0.5ms中断一次 count+; spcount-; if(spcount=0) spcount = speedlevel; gorun(); void delay(unsigned int endcount) count=0; dowhile(count7) step_index=0; else step_index-; if (step_index0) step_index=7; 专心-专注-专业