网络安全技术英文习题集-网络安全技术(共36页).docx

《网络安全技术英文习题集-网络安全技术(共36页).docx》由会员分享，可在线阅读，更多相关《网络安全技术英文习题集-网络安全技术(共36页).docx（36页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、精选优质文档-倾情为你奉上网络安全技术英文习题集Chapter 1 IntroductionANSWERS NSWERS TO QUESTIONS1.1 What is the OSI security architecture?The OSI Security Architecture is a framework that provides a systematic way of defining the requirements for security and characterizing the approaches to satisfying those requirements.

2、 The document defines security attacks, mechanisms, and services, and the relationships among these categories.1.2 What is the difference between passive and active security threats?Passive attacks have to do with eavesdropping on, or monitoring, transmissions. Electronic mail, file transfers, and c

3、lient/server exchanges are examples of transmissions that can be monitored. Active attacks include the modification of transmitted data and attempts to gain unauthorized access to computer systems.1.3 Lists and briefly define categories of passive and active security attacks?Passive attacks: release

4、 of message contents and traffic analysis. Active attacks: masquerade, replay, modification of messages, and denial of service.1.4 Lists and briefly define categories of security service?Authentication: The assurance that the communicating entity is the one that it claims to be. Access control: The

5、prevention of unauthorized use of a resource (i.e., this service controls who can have access to a resource, under what conditions access can occur, and what those accessing the resource are allowed to do).Data confidentiality: The protection of data from unauthorized disclosure.Data integrity: The

6、assurance that data received are exactly as sent by an authorized entity (i.e., contain no modification, insertion, deletion, or replay).Nonrepudiation: Provides protection against denial by one of the entities involved in a communication of having participated in all or part of the communication.Av

7、ailability service: The property of a system or a system resource being accessible and usable upon demand by an authorized system entity, according to performance specifications for the system (i.e., a system is available if it provides services according to the system design whenever users request

8、them).Chapter2 Symmetric Encryptionand Message ConfidentialityANSWERS NSWERS TO QUESTIONS2.1 What are the essential ingredients of a symmetric cipher?Plaintext, encryption algorithm, secret key, ciphertext, decryption algorithm.2.2 What are the two basic functions used in encryption algorithms?Permu

9、tation and substitution.2.3 How many keys are required for two people to communicate via a symmetric cipher?One secret key.2.4 What is the difference between a block cipher and a stream cipher?A stream cipher is one that encrypts a digital data stream one bit or one byte at a time. A block cipher is

10、 one in which a block of plaintext is treated as a whole and used to produce a ciphertext block of equal length.2.5 What are the two general approaches to attacking a cipher?Cryptanalysis and brute force.2.6 Why do some block cipher modes of operation only use encryption while others use both encryp

11、tion and decryption?In some modes, the plaintext does not pass through the encryption function, but is XORed with the output of the encryption function. The math works out that for decryption in these cases, the encryption function must also be used.2.7 What is triple encryption?With triple encrypti

12、on, a plaintext block is encrypted by passing it through an encryption algorithm; the result is then passed through the same encryption algorithm again; the result of the second encryption is passed through the same encryption algorithm a third time. Typically, the second stage uses the decryption a

13、lgorithm rather than the encryption algorithm.2.8 Why is the middle portion of 3DES a decryption rather than an encryption?There is no cryptographic significance to the use of decryption for the secondstage. Its only advantage is that it allows users of 3DES to decrypt data encrypted by users of the

14、 older single DES by repeating the key.2.9 What is the difference between link and end-to-end encryption?With link encryption, each vulnerable communications link is equipped on both ends with an encryption device. With end-to-end encryption, the encryption process is carried out at the two end syst

15、ems. The source host or terminal encrypts the data; the data in encrypted form are then transmitted unaltered across the network to the destination terminal or host.2.10 List ways in which secret keys can be distributed to two communicating parties.For two parties A and B, key distribution can be ac

16、hieved in a number of ways, as follows:(1)A can select a key and physically deliver it to B.(2)A third party can select the key and physically deliver it to A and B.(3)If A and B have previously and recently used a key, one party can transmit the new key to the other, encrypted using the old key.(4)

17、If A and B each has an encrypted connection to a third party C, C can deliver a key on the encrypted links to A and B.2.11 What is the difference between a session key and a master key?A session key is a temporary encryption key used between two principals. A master key is a long-lasting key that is

18、 used between a key distribution center and a principal for the purpose of encoding the transmission of session keys. Typically, the master keys are distributed by noncryptographic means.2.12 What is a key distribution center?A key distribution center is a system that is authorized to transmit tempo

19、rary session keys to principals. Each session key is transmitted in encrypted form, using a master key that the key distribution center shares with the target principal.ANSWERS NSWERS TO PROBLEMS2.1 What RC4 key value will leave S unchanged during initialization? That is, after the initial permutati

20、on of S, the entries of S will be equal to the values from 0 through 255 in ascending order.Use a key of length 255 bytes. The first two bytes are zero; that is K0 = K1 = 0. Thereafter, we have: K2 = 255; K3 = 254; K255= 2.2.2 If a bit error occurs in the transmission of a ciphertext character in 8-

21、bit CFB mode, how far does the error propagate? Nine plaintext characters are affected. The plaintext character corresponding to the ciphertext character is obviously altered. In addition, the altered ciphertext character enters the shift register and is not removed until the next eight characters a

22、re processed.2.3 Key distribution schemes using an access control center and/or a key distribution center have central points vulnerable to attack. Discuss the security implications of such centralization.The central points should be highly fault-tolerant, should be physically secured, and should us

23、e trusted hardware/software.Chapter 3 Public-Key Cryptography and Message AuthenticationANSWERS NSWERS TO QUESTIONS3.1 List three approaches to message authentication.Message encryption, message authentication code, hash function.3.2 What is message authentication code?An authenticator that is a cry

24、ptographic function of both the data to be authenticated and a secret key.3.3 Briefly describe the three schemes illustrated in Figture3.2.(a) A hash code is computed from the source message, encrypted using symmetric encryption and a secret key, and appended to the message. At the receiver, the sam

25、e hash code is computed. The incoming code is decrypted using the same key and compared with the computed hash code. (b) This is the same procedure as in (a) except that public-key encryption is used; the sender encrypts the hash code with the senders private key, and the receiver decrypts the hash

26、code with the senders public key. (c) A secret value is appended to a message and then a hash code is calculated using the message plus secret value as input. Then the message (without the secret value) and the hash code are transmitted. The receiver appends the same secret value to the message and

27、computes the hash value over the message plus secret value. This is then compared to the received hash code.3.4 What properties must a hash function have to be useful for message authentication?(1)H can be applied to a block of data of any size.(2)H produces a fixed-length output.(3)H(x) is relative

28、ly easy to compute for any given x, making both hardware and software implementations practical.(4)For any given value h, it is computationally infeasible to find x such that H(x) = h. This is sometimes referred to in the literature as the one-way property.(5)For any given block x, it is computation

29、ally infeasible to find y x with H(y) =H(x).(6)It is computationally infeasible to find any pair (x, y) such that H(x) = H(y).3.5 In the context of a hash function, what is a compression function?The compression function is the fundamental module, or basic building block, of a hash function. The has

30、h function consists of iterated application of the compression function.3.6 What are the principal ingredients of a public-key cryptosystem?Plaintext: This is the readable message or data that is fed into the algorithm as input. Encryption algorithm: The encryption algorithm performs various transfo

31、rmations on the plaintext. Public and private keys: This is a pair of keys that have been selected so that if one is used for encryption, the other is used for decryption. The exact transformations performed by the encryption algorithm depend on the public or private key that is provided as input. C

32、iphertext: This is the scrambled message produced as output. It depends on the plaintext and the key. For a given message, two different keys will produce two different ciphertexts. Decryption algorithm: This algorithm accepts the ciphertext and the matching key and produces the original plaintext.3

33、.7 List and briefly define three uses of a public-key cryptosystem.Encryption/decryption: The sender encrypts a message with the recipients public key. Digital signature: The sender signs a message with its private key. Signing is achieved by a cryptographic algorithm applied to the message or to a

34、small block of data that is a function of the message. Key exchange: Two sides cooperate to exchange a session key. Several different approaches are possible, involving the private key(s) of one or both parties.3.8 What is the difference between a private key and a secret key?The key used in convent

35、ional encryption is typically referred to as a secret key. The two keys used for public-key encryption are referred to as the public key and the private key.3.9 What is digital signature?A digital signature is an authentication mechanism that enables the creator of a message to attach a code that ac

36、ts as a signature. The signature is formed by taking the hash of the message and encrypting the message with the creators private key. The signature guarantees the source and integrity of the message.3.10 What is a public-key certificate?A pubic-key certificate consists of a public key plus a User I

37、D of the key owner, with the whole block signed by a trusted third party. Typically, the third party is a certificate authority (CA) that is trusted by the user community, such as a government agency or a financial institution.3.11 How can public-key encryption be used to distribute a secret key?Sev

38、eral different approaches are possible, involving the private key(s) of one or both parties. One approach is Diffie-Hellman key exchange. Another approach is for the sender to encrypt a secret key with the recipients public key.ANSWERS NSWERS TO PROBLEMS3.1 Consider a 32-bit hash function defined as

39、 the concatenation of two 16-bit functions: XOR and RXOR, defined in Section 3.2 as “two simple hash function.”a. Will this checksum detect all errors caused by an odd number of error bits? Explain.b. Will this checksum detect all errors caused by an even number of error bits? If not, characterize t

40、he error patterns that will cause the checksum to fail.c. Comments on the effectiveness of this function for use a hash functions for authentication.a. Yes. The XOR function is simply a vertical parity check. If there is an odd number of errors, then there must be at least one column that contains a

41、n odd number of errors, and the parity bit for that column will detect the error. Note that the RXOR function also catches all errors caused by an odd number of error bits. Each RXOR bit is a function of a unique spiral of bits in the block of data. If there is an odd number of errors, then there mu

42、st be at least one spiral that contains an odd number of errors, and the parity bit for that spiral will detect the error.b. No. The checksum will fail to detect an even number of errors when both the XOR and RXOR functions fail. In order for both to fail, the pattern of error bits must be at inters

43、ection points between parity spirals and parity columns such that there is an even number of error bits in each parity column and an even number of error bits in each spiral.c. It is too simple to be used as a secure hash function; finding multiple messages with the same hash function would be too e

44、asy.3.2 Suppose H (m) is a collision resistant hash function that maps a message of arbitrary bit length into an n-bit hash value. Is it true that, for all messages x, x with xx,we have H(x)H(x)?Explain your answer.The statement is false. Such a function cannot be one-to-one because the number of in

45、puts to the function is of arbitrary, but the number of unique outputs is 2n. Thus, there are multiple inputs that map into the same output.3.3 Perform encryption and decryption using the RSA algorithm, as in Figture3.9, for the following:a. p=3;q=11;e=7;M=5b. p=5;q=11;e=3;M=9c. p=7;q=11;e=17;M=8d.

46、p=11;q=13;e=11;M=7e. p=17;q=31;e=7;M=2.Hint: Decryption is not as hard as you think; use some finesse.a. n = 33; (n) = 20; d = 3; C = 26.b. n = 55; (n) = 40; d = 27; C = 14.c. n = 77; (n) = 60; d = 53; C = 57.d. n = 143; (n) = 120; d = 11; C = 106.e. n = 527; (n) = 480; d = 343; C = 128. For decrypt

47、ion, we have mod 527 = 12864 12816 1284 1282 1281 mod 527= 35 256 35 101 47 128 = 2 mod 527= 2 mod 2573.4 In a public-key system using RSA, you intercept the cipher text C=10 sent to a user whose public key is e=5, n=35.What is the plaintext M?M = 53.5 In an RSA system, the public key of a given use

48、r is e=31, n=3599.What is the private key of this user?d = 30313.6 Suppose we have a set of blocks encoded with the RSA algorithm and we dont have the private key, Assume n=pq, e is the public key. Suppose also someone tells us they know one of the plaintext blocks has a common factor with n. Does this help us in any way?Yes. If a plaintext block has a common factor with n modulo n then the encoded block will also have a common factor with n modulo n. Because we encode blocks that are smaller than pq, the factor must