Binary-Number-Output-Electrical-and-Computer-Engineering二进制数输出的电气和计算机工程课件.ppt

《Binary-Number-Output-Electrical-and-Computer-Engineering二进制数输出的电气和计算机工程课件.ppt》由会员分享，可在线阅读，更多相关《Binary-Number-Output-Electrical-and-Computer-Engineering二进制数输出的电气和计算机工程课件.ppt（18页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、Binary Number Output To display a number in binary format, a program looks at each bit in the number and sends the ASCII equivalent of a 1 (31h) or a 0 (30h) to the screen using the DOS single character Int 21h function 2. The 8-bit value E6h (1110 0110) would have 31h,31h,31h,30h,30h,31h,31h,30h He

2、x Number Output To display the 8-bit value E6h as a HEX number, the ASCII codes for E(45h) and 6(36h) would be sent using Int 21h, function 2.Procedure to Display Hex DigitInput: AL Clear upper 4-bits of AL (should only have values 0-F) Check AL for 0-9 (CMP AL,9) (Add AL,30h if 0-9) Must be Char if

3、 above 9 (Add AL, 37h if char; 37h + 10d = 41h(A) Use Int21h, function 2 to display char (DL holds char)Procedure to Display 1 Hex DigitInput: ALOut1hexprocAndal,0fh ;only want lower 4 bits of ALCmpal,9 ;is 4 bit value above 9?JaischarAddal,30h ;convert to ascii digit 0 to 9JmpprintitIschar: addal,3

4、7h ;convert to ascii digit A to FPrintit: Movdl,alMovah,2Int21h ;print it using DOS single char outputRetOut1hexendpProcedure for CRLF Use Int 21h, function 2 to display ASCII values for CR (0Dh), LF (0Ah).Pcrlfproc;print carriage return/line feedMovdl,0Dh ;carriage returnMovah,2;function # goes int

5、o AHInt21h;print itMovdl,0Ah ;line feedMovah,2;function #Int21hRetPcrlfendpIrvine Library Procedures Writeint writes an unsigned 16-bit integer to standard output in ASCII binary, decimal, octal, or hexadecimal format. Input: AX=integer, BX=radix(2,8,10,or 16) Writeint_signed writes a 16-bit integer

6、 to standard output in signed decimal ASCII format. Input: AX=integer.Irvine Library Procedures Writelong - writes an unsigned 32-bit integer to standard output in ASCII binary, decimal, octal, or hexadecimal format. Input: EAX=integer, BX=radix(2,8,10,or 16) Writebcd writes an 8-bit binary coded de

7、cimal byte to standard output. Input: AL=byte. Crlf Writes a carriage return and line feed to standard output.Irvine Library Procedures Clrscr Clears the screen and locates the cursor at the upper left corner. No input. Works only on video page 0, and only in text mode. Writestring Writes a null ter

8、minated string to standard output. Input: DX points to the string. Readint Reads a signed ASCII decimal string from standard input and stores it as a 16-bit binary integer. Input: none. Output: AX contains the value.Changing Model Size Using a small model size requires that procedures must be within

9、 the code segment (within 256 bytes). Therefore only the offset address is needed in the call instruction. Using a Medium model size allows larger differences in placement of procedures. Therefore the value of CS must also be saved when going to the procedure. CS and IP are both pushed onto the stac

10、k.Lab6A- Question C Writing 16 different characters (0-F) as a most significant digit and 16 different characters as a least significant digit results in a total of 256 different values. Want to have two loops with the inner loop changing the LSD and the outer loop changing the MSD. Can use a shr in

11、struction to get upper 4 bits into lower 4 bits.Lab 6B Using Irvine Library Procedures to Display Integers in Different Bases Writeint uses BX to determine desired radix. BX=2 ;display in binary BX=8 ;display in octal BX=10 ;display in decimal BX=16 ;display in hex AX=integer Writeint_signed display

12、s signed 16-bit value as a signed decimal ASCII format.More on Lab6B Irvine Libraries Note that with Writestring, strings can finally be null-terminated. (much more common than DOS $) What is maximum value that can be represented with 16 bits using 2s complement format (216 = ?)More on Lab6B Irvine

13、Libraries What directive is needed to access the Irvine libraries? Extrn Clrscr:proc, Crlf:proc, Readint:proc When linking must have complete path of irvine libraries unless the irvine.lib is the current directory.Unsigned Decimal Number Output To display the 8-bit value E6h as an unsigned decimal n

14、umber, first a conversion must occur. E6h = (14*16)+6=230(decimal) The ASCII codes for 2(32h), 3(33h), 0(30h) would be sent using Int21h, function 2.Signed Decimal Number Output To display the 8-bit value E6h as a signed decimal number (2s complement representation), first a conversion must occur. E

15、6h = 11100110b = -1Ah= -26(decimal) The ASCII codes for -(2Dh),2(32h), 6(36h), would be sent using Int21h, function 2.Lab6C Number Input Uses Irvine library procedure to Writestring to output. Uses Readstring to read in data as a string Readstring Reads a string of characters from standard output an

16、d stores them in a null terminated string. Input: DX=string pointer. CX= maximum string count. Output: AX=number of characters typed.Lab 6C- What to do? Call to dec2hex has BX pointing to ASCII string. Expects converted results in AX. Each string is 2 bytes long (excluding null char). First byte is ASCII representation of MSD. Second byte is LSD.Procedure for Lab6C-Question 4 Subtract 30h to convert from ASCII to decimal. Multiply by 10. Save value Put LSD in AL. Subtract 30h to convert Add value to 10s value.