充电：质量管理常用术语汇总(中英文对照)(共21页).doc

《充电：质量管理常用术语汇总(中英文对照)(共21页).doc》由会员分享，可在线阅读，更多相关《充电：质量管理常用术语汇总(中英文对照)(共21页).doc（21页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、精选优质文档-倾情为你奉上充电：质量管理常用术语汇总（中英文对照） 【2】tender 标书normative document 标准文件supplemental 补充nonconforming product 不合格品control of nonconforming product不合格品控制control procedure of nonconforming products 不合格品控制程序tendency of nonconformance 不合格倾向purchasing 采购verification of purchased product采购的产品验证 purchasing pro

2、cess 采购过程 【3】purchasing control procedure采购控制程序purchasing information 采购信息reference standard 参照标准reference instructions 参照细则stockhouse 仓库measurement, analysis and improvement 测量，分析和改进measurement result 测量结果control procedure of monitoring and measuring devices测量设备控制程序planning 策划preservation of produc

3、t 产品保护【4】control procedure for maintenance, replacement and records of product identification产品标识的保持, 更换及记录控制程序procedure for product identification and traceability 产品标识和可追溯性程序conformity of product 产品的符合性monitoring and measurement of product 产品的监督和测量product plan 产品方案control procedure for product pre

4、servation 产品防护控制程序method of product release 产品放行方法conformity of product,product conformity 产品符合性product realization 产品实现planning of product realization产品实现策划【5】product characteristics 产品特性input to product requirements产品要求的输入product status 产品状态final acceptance of product 产品最后验收procedure 程序program doc

5、uments 程序文件continual improvement 持续改进procedure for continual improvement of quality management system持续改进质量体系程序adequacy 充分性storage location 存放地点【6】agency personnel 代理人员submission of tenders 递交标书adjustment 调整，调节statutory and regulatory requirements法律法规要求rework, vt 返工repair, vt 返修subcontractor 分承包方ann

6、ex 附录improvement 改进mprovement actions 改进措施【7】on-the-job training 岗位技能培训responsibility of individual department and post 各部门, 各岗位职责change identification 更改标记change order number 更改单编号process sheets 工艺单process specification 工艺规程procedure(process card) 工艺规程(工艺卡)process characteristics 工艺特性Job Descriptio

7、n Format 工种描述单work environment 工作环境【8】impartiality 公正性functional requirements 功能要求supplier 供方supplier evaluation procedure供方评价程序supplier provided special processes供方提供的特殊过程verification at suppliers premises供方现场验证supply chain 供应链criteria for supplier selection, evaluation and re-evaluation供应商选择、评估和再评

8、估准则communication 沟通customer 顾客【9】customer property 顾客财产control procedure for customer property 顾客财产控制程序customer feedback 顾客反馈Customer Service Contact Form顾客服务联系表customer cummunications 顾客沟通customer satisfaction 顾客满意statistical analysis of customer satisfaction 顾客满意度统计分析customer complaint 顾客投诉identif

9、icaion of customer requirements顾客要求的识别management review 管理评审【10】records from management review管理评审记录management review control procedure管理评审控制程序management representative 管理者代表management responsibility 管理职责specified limits of acceptability规定的可接受界限specified use 规定的用途process 过程complexity of processes 过程

10、的复杂性monitoring and measurement of processes 过程的监视和测量operation of process 过程的运行【11】status of processes 过程的状态process approach 过程方法process controls 过程控制process control documents 过程控制文件process performance 过程业绩appropriateness 合适性changes to contractor 合同的更改contract review control procedure合同评审控制程序internet

11、 sales 互联网销售environmental conditions 环境条件【12】monogram pragram requirements会标纲要要求type of activities 活动类型infrastructure 基础建设infrastructure 基础设施fundamentals and vocabulary 基础与词汇control of records 记录控制technical specificaion 技术规范process trace sheet 加工跟踪单monitoring and measurement 监视和测量monitoring and meas

12、uring device监视和测量装置【13】control of monitoring and measuring devices 监视和测量装置控制check method 检查方法frequency of checks 检查频次calibration status 检定状态inspection and test control procedure检验和试验控制程序identification procedure for inspection and test status 检验和试验状态标识程序inspection witness point 检验见证点inspection hold p

13、oint 检验停止点buildings 建筑物delivery 交付【14】post-delivery activities 交付后的活动delivery activities 交付活动interface 接口acceptance of contract or orders接受合同或定单type of medium 介质类型experience 经验correction action 纠正措施Corrective action response time纠正措施答复时间，纠正措施响应时间management procedure for corrective actions 纠正措施管理程序co

14、rrective action response times纠正措施响应时间【15】development activity 开发活动traceability mark 可追溯性标志objectivity 客观性Customer Service Log 客户服务记录簿control feature 控制特性，控制细节control features 控制细则periodic assessment of stock库存定期评估justification 理由routine 例程，惯例，常规internal communication 内部沟通【16】internal audit 内部审核inte

15、rnal audit procedure 内部审核程序internally controlled standard 内控标准internal audit 内审results of internal and external audits 内外部审核结果 competence 能力 training 培训 training needs 培训需要 evaluate 评价records of the results of the review评审结果的记录【17】review output 评审输出review input 评审输入Purchase Requisition 请购单authority

16、权限validation 确认concession 让步human resources 人力资源job training of personnel 人员岗位培训qualification of personnel 人员资格equipment control procedure设备控制程序【18】device type 设备类型order of design changes 设计更改通知单design and development control procedure 设计和开发控制程序design and development 设计开发design and development plann

17、ing设计开发策划control of design and development changes设计开发更改控制design and development review设计开发评审design and development validation设计开发确认design and development outputs设计开发输出design and development inputs设计开发输入【1】design and development verification设计开发验证design validation 设计确认design documentation 设计文件编制desi

18、gn acceptance criteria 设计验收准则design verification 设计验证audit program 审核大纲 conduct of audits 审核行为audit criteria 审核准则production process control 生产过程控制production process control procedure生产过程控制程序【20】production and service provision生产和服务提供control of production and service provision 生产和服务提供的控制validation of

19、 processes for production and service provision生产和服务提供过程的确认production order 生产令identification and traceability识别和可追溯性identification and traceability maintenance and replacement识别和可追溯性维护与替换invalidate 使失效market survey 市场调研suitability 适宜性scope 适用范围【21】controlled condition 受控状态terms and definitions 术语与定

20、义analysis of data 数据分析sequence 顺序transfer of ownership 所有权转移system document 体系文件statistical technique 统计方法outsource(vt) a process 外包过程external source 外部来源documents of external origin 外来文件【22】outsource, vt 外协unique identification 唯一的标识maintenance 维护Document Change Control 文件更改控制Request For Document C

21、hange (RDC)文件更改需求单control of documents 文件控制documentation requirements 文件要求enquiry 问询，询价field nonconformity analysis现场不符合分析relevance 相关性【23】interaction 相互作用detail design 详细设计，详图设计，零件设计，施工设计sales department 销售部sales contract 销售合同checklist 校验表，一览表，检查一览表calibration 校准submission of action plans行动计划的递交doc

22、umented procedures 形成文件的程序documented statement 形成文件的声明performance requirements 性能要求【24】licensee responsibilities许可证持有者责任acceptance criteria 验收准则verification arrangement 验证安排verification results 验证结果customer focus以客户为关注点，以客户为焦点awareness 意识introduction 引言，概述，介绍normative references 引用标准application 应用vi

23、sit to user 用户访问【25】review of requirements related to the product 有关产品的要求评审competent 有能力的 effectiveness 有效性determination of requirements related to the product 与产品有关的要求的确定customer-related processes与顾客有关的过程preventive action 预防措施management procedure for preventive actions 预防措施管理程序planned results 预期的结果

24、intended use 预期的用途procedure for competence, knowledge and training of personnel 员工能力, 知识和培训程序【26】personnel training procedure员工培训程序supporting services 支持性服务functions 职能部门responsibility 职责assignment of responsibility 职责分工workmanship 制造工艺manufacturing acceptance criteria制造验收准则quality policy 质量方针qualit

25、y programs 质量纲领quality management system 质量管理体系【27】quality management system planning质量管理体系策划performance of the quality management system 质量管理体系业绩quality plan 质量计划quality records 质量记录quality objectives 质量目标quality audit 质量审核quality manual 质量手册quality problem handling form质量问题处理单quality requirements

26、质量要求allocation table of quality responsibilities 质量职能分配表【28】resource management 资源管理allocation of resources 资源配置general requirements 总要求，一般要求constituent part 组成部件organization 组织continual improvement of the organization 组织的持续改进size of organization 组织的规模Organizational Diagram 组织机构图final acceptance 最终验

27、收work instructions 作业指导书2质量管理术语英文缩写【29】PDCA：Plan、Do、Check、Action；策划、实施、检查、处置PPAP：Production Part Approval Process；生产件批准程序APQP：Advanced Product Quality Planning；产品质量先期策划 FMEA：Potential Failure Mode and Effects Analysis 潜在失效模式及后果分析SPC：Statistical Process Control 统计过程控制MSA：Measurement System Analysis 测

28、量系统控制CP：Control Plan 控制计划QSA：Quality System Assessment 质量体系评定PPM：Parts Per Million 每百万零件不合格数1QM：Quality Manua 质量手册【30】QP：Quality Procedure 质量程序文件Quality Planning 质量策划Quality Plan 质量计划CMK：机器能力指数CPK：过程能力指数CAD：Computer-Aided Design 计算机辅助能力设计OEE：Overall Equipment Effectiveness 设备总效率QFD：Quality Function

29、Deployment 质量功能展开FIFO：First in, First out 先进先出COPS：Customer Oriented Processes 顾客导向过程TCQ： Time、Cost、Quality 时间、成本、质量MPS：Management Processes 管理性过程【31】SPS：Support Processes 支持性过程TQM：Total Quality Management 全面质量管理PQA：Product Quality Assurance 产品质量保证（免检）QP-QC-QI：质量三步曲 质量计划质量控制质量改进QAF：Quality Assurance

30、 File 质量保证文件QAP：Quality Assurance Plan 质量保证计划PFC：Process Flow Chart 过程流程图QMS：Quality Management Systems 质量管理体系JIT：Just In Time 准时（交货）ERP：Enterprise Requirement Planning 企业需求计划【32】QC：Quality Control 质量控制QA：Quality Audit 质量审核Quality Assurance 质量保证IQC:In come Quality Control 进货质量控制IPQC:In Process Quali

31、ty Control 过程质量控制FQC:Final Quality Control 成品质量控制OQC:Out Quality Control 出货质量控制4M1E:Man、Machine、Material、Method、Environment 人、机、料、法、环5W1H：Why、What、Who、When、Where、How 为何/做什么/谁做/时间/地点/如何做6S：Seiri、Seiton、Seiso、Seiketsu、Shitsuke、Safety 整理、整顿、清扫、清洁、素养、安全TRI值：Total Record Injury （三种）可记录工伤值SMART精明原则：Specif

32、ic Measurable Achievable Result Oriented Timed具体的描述、可以测量的、可以通过努力实现的、有结果导向性的、有时间性的【33】5S : 5S管理ABC : 作业制成本制度 (Activity-Based Costing)ABB : 实施作业制预算制度 (Activity-Based Budgeting)ABM : 作业制成本管理 (Activity-Base Management)APS : 先进规画与排程系统 (Advanced Planning and Scheduling)ASP : 应用程序服务供货商（Application Service

33、Provider）ATP : 可承诺量 (Available To Promise)AVL : 认可的供货商清单(Approved Vendor List)BOM : 物料清单 (Bill Of Material)BPR : 企业流程再造 (Business Process Reengineering)【34】BSC : 平衡记分卡 (Balanced ScoreCard)BTF : 计划生产 (Build To Forecast)BTO : 订单生产 (Build To Order)CPM : 要径法 (Critical Path Method)CPM : 每一百万个使用者会有几次抱怨(Co

34、mplaint per Million)CRM : 客户关系管理 (Customer Relationship Management)CRP : 产能需求规划 (Capacity Requirements Planning)CTO : 客制化生产 (Configuration To Order)DBR : 限制驱导式排程法 (Drum-Buffer-Rope)DMT : 成熟度验证(Design Maturing Testing)【35】DVT : 设计验证(Design Verification Testing)DRP : 运销资源计划 (Distribution Resource Plan

35、ning)DSS : 决策支持系统 (Decision Support System)EC : 设计变更工程变更 (Engineer Change)EC : 电子商务 (Electronic Commerce)ECRN : 原件规格更改通知(Engineer Change Request Notice)EDI : 电子数据交换 (Electronic Data Interchange)EIS : 主管决策系统 (Executive Information System)EMC : 电磁相容(Electric Magnetic Capability)EOQ : 基本经济订购量 (Economic

36、 Order Quantity)【36】ERP : 企业资源规划 (Enterprise Resource Planning)FAE : 应用工程师(Field Application Engineer)FCST : 预估(Forecast)FMS : 弹性制造系统 (Flexible Manufacture System)FQC : 成品质量管理 (Finish or Final Quality Control)IPQC: 制程质量管理 (In-Process Quality Control)IQC : 进料质量管理 (Incoming Quality Control)ISO : 国际标准组

37、织 (International Organization for Standardization)ISAR: 首批样品认可(Initial Sample Approval Request)JIT : 实时管理 (Just In Time)【37】KM：知识管理 (Knowledge Management)L4L : 逐批订购法 (Lot-for-Lot)LTC : 最小总成本法 (Least Total Cost)LUC : 最小单位成本 (Least Unit Cost)MES : 制造执行系统 (Manufacturing Execution System)MO : 制令(Manufac

38、ture Order)MPS : 主生产排程 (Master Production Schedule)MRO : 请修(购)单(Maintenance Repair Operation)MRP : 物料需求规划 (Material Requirement Planning)MRPII : 制造资源计划 (Manufacturing Resource Planning)【38】NFCF : 更改预估量的通知Notice for Changing ForecastOEM : 委托代工 (Original Equipment Manufacture)ODM : 委托设计与制造 (Original D

39、esign & Manufacture)OLAP : 在线分析处理 (On-Line Analytical Processing)OLTP : 在线交易处理 (On-Line Transaction Processing)OPT : 最佳生产技术 (Optimized Production Technology)OQC : 出货质量管理 (Out-going Quality Control)PDCA : PDCA管理循环 (Plan-Do-Check-Action)PDM : 产品数据管理系统 (Product Data Management)PERT : 计划评核术 (Program

40、 Evaluation and Review Technique)【39】PO : 订单(Purchase Order)POH : 预估在手量 (Product on Hand)PR : 采购申请Purchase RequestQA : 品质保证(Quality Assurance)QC : 质量管理(Quality Control)QCC : 品管圈 (Quality Control Circle)QE : 品质工程(Quality Engineering)RCCP : 粗略产能规划 (Rough Cut Capacity Planning)RMA : 退货验收Returned Materi

41、al ApprovalROP : 再订购点 (Re-Order Point)【40】SCM : 供应链管理 (Supply Chain Management)SFC : 现场控制 (Shop Floor Control)SIS : 策略信息系统 (Strategic Information System)SO : 订单(Sales Order)SOR : 特殊订单需求(Special Order Request)SPC : 统计制程管制 (Statistic Process Control)TOC : 限制理论 (Theory of Constraints)TPM : 全面生产管理Total

42、Production ManagementTQC : 全面质量管理 (Total Quality Control)TQM : 全面品质管理 (Total Quality Management)WIP : 在制品 (Work In Process)3TS16949中英文专业术语【41】CP控制计划，Control PlanSP支持过程，Support ProcessPPM百万分之，Parts Per MillionMP管理过程，Management ProcessCPK过程能力指数，Process CapabilityIndexSPC统计过程控制，Statistical ProcessContr

43、olCOP顾客导向过程，Customer OrientedProcessMSA测量系统分析，Measurement SystemsAnalysisPPAP生产件批准程序，Production PartApproval ProcessAPQP产品质量先期策划，Advanced ProductQuality Planning【42】FMEA潜在失效模式及后果分析，Failure MonFailureMode and Effects AnalysisPFMEA过程潜在失效模式及后果分析，ProcessFailureMode and Effects AnalysisPPK初始过程能力指数或过程性能指数

44、，PreliminaryProcess Index或Performance ProcessIndex高级统计方法advanced statisticalmethods可数型数据 attributes data均值average认知 awareness基本的统计方法basic statistical methods二项分布binomial distribution【43】因果图cause-effect diagram中心线central line普通原因common cause连续的consecutive控制control控制图control limit(charts)质量和生产率持续改进 co

45、ntinualimprovement in quality and productivity累计和 cesium探测detection分布distribution【44】单值 individual位置 location平均值 mean中位数median移动极差moving range排列图praetor chart正态分布normal distribution可操作的定义operational definition泊松分布Poisson distribution预防prevention【45】解决问题problem solving过程均值process average过程能力process c

46、apability过程控制process control过程性能process performance过程分布宽度process spread随机性randomness二次方程式quadratic随机抽样random sampling极差range链run【46】合理子组rational subgroup链图run chart样本sample形状shape特殊原因special cause规范specification稳定性stability统计值statistic稳定过程stable process标准差standard deviation【47】统计控制statistical contro

47、l统计过程控制statistical processcontrol子组subgroupI类错误type error类错误type error变差variation区域分析zone analysis分配 apportionment基准数据benchmark data材料清单bill of material【48】特性矩阵图characteristics matrix设计失效模式及后果分析design failuremode and effects analysis可制造性和装配设计design formanufacturability and assembly设计信息检查表 design inf

48、ormationchecklist设计评审design reviews设计确认design validation设计验证 design verification耐久性durability失效模式分析failure modes analysis可行性feasibility【49】改善kaizen有限元分析finite element analysis维修性maintainability包装packaging初始材料清单preliminary bill ofmaterial初始过程流程preliminary processflow chart过程失效模式及后果分析process failuremo

49、de and effects analysis仿真simulation产品保证计划product assurance plan试生产production trial run【50】质量策划认定quality planningsign-off可靠性reliability特殊特性special characteristics可靠性分配reliabilityapportionment同步工程simultaneous engineering子系统subsystem系统system小组可行性承诺team feasibilitycommitment进度计划timing plan价值工程/价值分析value engineering / value analysis【51】顾客的呼声voice of the customer过程的呼声 voice of the process控制计划con