螺丝五金词汇大全.doc

《螺丝五金词汇大全.doc》由会员分享，可在线阅读，更多相关《螺丝五金词汇大全.doc（8页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、【精品文档】如有侵权，请联系网站删除，仅供学习与交流螺丝五金词汇大全.精品文档.螺栓类Bolts series六角全牙螺栓Hexagon head bolts with full thread双头螺栓Double end bolts六角半牙螺栓Hexagon head bolts with half threadT形螺栓T-head bolt活节螺栓Eye bolts螺钉类Screws series内六角螺钉Hexagon head screws三角牙螺钉trigonodont screw盘头机钉Pan head screws沉头机钉Countersunk head Screws蝶形螺钉Win

2、g Screws矮头内六角low head socket cap screws紧钉螺钉fasteners set screws自攻螺钉self-tapping screws螺母类Nuts series六角螺母Hexagon nuts圆螺母round nuts金属锁紧螺母Metal fasten nuts尼龙锁紧螺母Plastic fastening nuts盖母Cap nuts吊环螺母Eyelet nuts开槽螺母Slotted nuts蝶形螺母Wing nuts垫片与挡圈类Gaskets and rings平垫Plain washers弹垫Spring washers碟簧Wing sprin

3、g washers波垫Wave washers轴挡Circlips for shaft孔挡Circlips for holes大平垫Large plain washer方斜垫Square taper washers内锯齿垫圈internal teeth serrated lock washer外锯齿垫圈external teeth serrated lock washer销键类Pins and keys平键Plain pins内螺纹圆柱销straight pins with internal thread圆锥销taper pins开口销Spring split pins弹性圆柱销Spring-

4、type straight pins钣金类Sheet metal series 压铆螺钉self-clinching Studs压铆螺母self-clinching nut拉铆钉pop rivets铆螺母Blind Rivet Nuts 标牌铆钉Tags rivets喉箍类Lock series标准喉箍Standard locks美式喉箍American locks嵌件类Inserts series钢丝螺套wire thread inserts安装工具installation kits密封类Sealing series 密封圈Sealing ringsO型圈O rings喉塞pipe plug

5、产品分类product category名称product name标准号Standard number标牌铆钉 Tags rivets半圆头铆钉cup head rivets沉头双鼓抽芯铆钉Countersunk multi-grip rivet圆头双鼓型抽芯铆钉snap multi-grip rivet压铆螺钉self-clinching Screws压铆螺母self-clinching nuts大扁圆头半空心铆钉large oval head socket shank rivets沉头半空心铆钉countersunk head semi-tublar rivets封闭型扁圆头抽芯铆钉mu

6、shroom head break mandrel closed end blind rivets封闭型沉头抽芯铆钉deg flush head break mandrel closed end blind rivets开口型沉头抽芯铆钉Slotted countersunk head blind rivets开口型扁圆头抽芯铆钉Slotted flat round head blind rivets扁圆头击芯铆钉flat round head drive rivets沉头击芯铆钉Countersunk head drive rivets平头铆螺母flat head self-clinchin

7、g nuts沉头铆螺母countersunk head self-clinching nuts小沉头铆螺母small countersunk head self-clinching nuts120小沉头铆螺母120small countersunk head self-clinching nuts平头六角铆螺母flat head hexagon self-clinching nuts内锯齿锁紧垫圈internal teeth serrated Locking washers外锯齿锁紧垫圈external teeth serrated Locking washers开口挡圈Split baffl

8、e ring平垫Plain washers大平垫Large plain washer弹垫Spring washers波形弹簧垫圈Wave spring washers碟簧Wing spring washers轴用挡圈Circlips for shafts孔用挡圈Circlips for holes带双槽方斜垫圈Square taper washers With double slots带单槽方斜垫圈Square taper washers With the single slot轴用钢丝挡圈elastic spring circlips for shafts孔用钢丝挡圈elastic spri

9、ng circlips for holes喉箍Pipe Pluge series美式喉箍American Pipe Pluge十字槽盘头自攻螺钉Cross recessed pan head self-tapping screws十字槽沉头自攻螺钉Cross recessed countersunk head self-tapping screws十字槽半沉头自攻木螺钉Cross recessed raised countersunk head self-tapping wood screws三角牙自攻锁紧螺钉trigonodont self-tapping locking screws开槽圆

10、柱头螺钉slotted cheese-head screw开槽盘头螺钉slotted pan-head screws开槽沉头螺钉slotted countersunk-head screws六角头木牙螺钉Hexagon wood screw内六角圆柱头螺钉Hexagon cheese-head screws内六角矮圆柱头螺钉Hexagon small cheese-head screws内六角沉头螺钉hexagon countersunk-head screws内六角平端紧定螺钉hexagon socket set screws with flat point内六角锥端紧定螺钉hexagon

11、socket set screws with cone point内六角圆柱端紧定螺钉hexagon socket set screws with dog point内六角凹端紧定螺钉hexagon socket set screws with cup point十字槽盘头螺钉cross recessed pan head screws十字槽沉头螺钉cross recessed countersunk-head screws十字槽半沉头螺钉cross recessed raised countersunk head screws吊环螺钉Eyelet bolts蝶形螺钉Wing screws圆螺

12、母Round nuts吊环螺母Eyelet nuts六角螺母Hexagon nuts六角薄螺母hexagon thin nuts全金属六角锁紧螺母all metall hexagon locking nuts非金属嵌件六角锁紧加厚螺母non all metal hexagon high nuts with inserts 六角盖形螺母hexagon cap nuts六角开槽螺母Slotted hexagon nuts蝶形螺母Wings nutsT形槽用螺栓bolts for T-slott六角粗杆半牙螺栓Hexagon stubby bolts with half thread六角头螺栓Hex

13、agon bolts大半圆头方颈螺栓Mushroom-head square neck bolts活节螺栓Eye bolts不等长双头螺栓Un-Equilong double end bolts钢丝螺套安装工具wire thread insert kits钢丝螺套wire thread inserts开口销Spring split pins圆锥销Taper pins,内螺纹圆锥销Taper pins with inside thread内螺纹圆柱销Straight pins with inside thread内螺纹圆柱销Straight pins with inside thread弹性圆柱销Spring-type straight pins平键straight keys密封圈sealing rings内六角喉塞hexagon pipe plugO型圈O rings表面处理Surface finishing