传感器英文文献翻译-光电传感器-(2).doc

《传感器英文文献翻译-光电传感器-(2).doc》由会员分享，可在线阅读，更多相关《传感器英文文献翻译-光电传感器-(2).doc（90页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、Four short words sum up what has lifted most successful individuals above the crowd: a little bit more.-author-date传感器英文文献翻译-光电传感器-(2)Photoelectric sensor传感器英文文献翻译 光电传感器 报告人: 学 号： 专 业： 老 师： 2011年 6月 2日Photoelectric sensor Key word: photoelectric effect photoelectric element photoelectric sensor clas

2、sification sensor application characteristics .Abstract: in the rapid development of science and technology in the modern society, mankind has into the rapidly changing information era, people in daily life, the production process, rely mainly on the detection of information technology by acquiring,

3、 screening and transmission, to achieve the brake control, automatic adjustment, at present our country has put detection techniques listed in one of the priority to the development of science and technology. Because of microelectronics technology, photoelectric semiconductor technology, optical fib

4、er technology and grating technical development makes the application of the photoelectric sensor is growing. The sensor has simple structure, non-contact, high reliability, high precision, measurable parameters and quick response and more simple structure, form etc, and flexible in automatic detect

5、ion technology, it has been widely applied in photoelectric effect as the theoretical basis, the device by photoelectric material composition. Text: First, theoretical foundation - photoelectric effect Photoelectric effect generally have the photoelectric effect, optical effect, light born volts eff

6、ect. The light shines in photoelectric material, according to the electronic absorption material surface energy, if absorbed energy large enough electronic electronic will overcome bound from material surface and enter the outside space, which changes photoelectron materials, this kind of phenomenon

7、 become the conductivity of the photoelectric effect According to Einsteins photoelectron effect, photon is moving particles, each photon energy for hv (v for light frequency, h for Plancks constant, h = 6.63 * 10-34 J/HZ), thus different frequency of photons have different energy, light, the higher

8、 the frequency, the photon energy is bigger. Assuming all the energy photons to photons, electronic energy will increase, increased energy part of the fetter, positive ions used to overcome another part of converted into electronic energy. According to the law of conservation of energy: Type, m for

9、electronic quality, v for electronic escaping the velocity, A microelectronics the work done. From the type that will make the optoelectronic cathode surface escape the necessary conditions are h A. Due to the different materials have different escaping, so reactive to each kind of cathode materials

10、, incident light has a certain frequency is restricted, when the frequency of incident light under this frequency limit, no matter how the light intensity, wont produce photoelectron launch, this frequency limit called red limit. The corresponding wavelength for type, c for the speed of light, A rea

11、ctive for escaping. When is the sun, its electronic energy, absorb the resistivity reduce conductive phenomenon called optical effects. It belongs to the photoelectric effect within. When light is, if in semiconductor electronic energy big with semiconductor of forbidden band width, the electronic e

12、nergy from the valence band jump into the conduction band, form, and at the same time, the valence band electronic left the corresponding cavities. Electronics, cavitation remained in semiconductor, and participate in electric conductive outside formed under the current role. In addition to metal ou

13、ter, most insulators and semiconductor have photoelectric effect, particularly remarkable, semiconductor optical effect according to the optoelectronics manufacturing incident light inherent frequency, when light resistance in light, its conductivity increases, resistance drops. The light intensity

14、is strong, its value, if the smaller, its resistance to stop light back to the original value. Semiconductor produced by light illuminate the phenomenon is called light emf, born volts effect on the effect of photoelectric devices have made si-based ones, photoelectric diode, control thyristor and o

15、ptical couplers, etc. Second, optoelectronic components and characteristics According to the outside optoelectronics manufacturing optoelectronic devices have photoelectron, inflatable phototubes and photoelectric times once tube. 1. Phototubes phototubes are various and typical products are vacuum

16、phototubes and inflatable phototubes, light its appearance and structure as shown in figure 1 shows, made of cylindrical metal half cathodic K and is located in the wires cathodic axis of anode in A package of smoke into the vacuum, when incident light within glass shell in the cathode, illuminate A

17、 single photon took all of its energy transfer to the cathode materials A free electrons, so as to make the freedom electronic energy increase h. When electrons gain energy more than escape of cathode materials, it reactive A metal surface constraints can overcome escape, form electron emission. Thi

18、s kind of electronic called optoelectronics, optoelectronic escaping the metal surface for after initial kinetic energy Phototubes normal work, anode potential than the cathode, shown in figure 2. In one shot more than red light frequency is premise, escape from the optoelectronic cathode surface by

19、 positive potential attracted the anode in photoelectric tube forming space, called the current stream. Then if light intensity increases, the number of photons bombarded the cathode multiplied, unit of time to launch photoelectron number are also increasing, photo-current greatens. In figure 2 show

20、s circuit, current and resistance is the voltage drop across the only a function of light intensity relations, so as to achieve a photoelectric conversion. When the LTT optoelectronic cathode K, electronic escape from the cathode surface, and was the photoelectric anode is an electric current, power

21、 plants absorb deoxidization device in the load resistance - I, the voltage Phototubes photoelectric characteristics fig.03 shows, from the graph in flux knowable, not too big, photoelectric basic characteristics is a straight line. 2. Photoelectric times had the sensitivity of vacuum tube due to lo

22、w, so with people developed has magnified the photomultiplier tubes photo-current ability. Figure 4 is photomultiplier tube structure schematic drawing. 图4光电倍增结构示意图From the graph can see photomultiplier tubes also have A cathode K and an anode A, and phototubes different is in its between anode and

23、cathode set up several secondary emission electrodes, D1, D2 and D3. They called the first multiply electrode, the second multiply electrode,. Usually, double electrode for 10 15 levels. Photomultiplier tubes work between adjacent electrode, keeping a certain minimum, including the cathode potential

24、 potentials, each multiply electrode potential filtering increases, the anode potential supreme. When the incident light irradiation, cathodic K escape from the optoelectronic cathode multiplied by first accelerated, by high speed electrode D1 bombarded caused secondary electron emission, D1, an inc

25、ident can generate multiple secondary electron photonics, D1 emit of secondary electron was D1, D2 asked electric field acceleration, converged on D2 and again produce secondary electron emission. So gradually produce secondary electron emission, make electronic increased rapidly, these electronic f

26、inally arrived at the anode, form a larger anode current. If a n level, multiply electrodes at all levels for sigma, the multiplication of rate is the multiplication of photomultiplier tubes can be considered sigma n rate, therefore, photomultiplier tube has high sensitivity. In the output current i

27、s less than 1mA circumstances, it in a very wide photoelectric properties within the scope of the linear relationship with good. Photomultiplier tubes this characteristic, make it more for light measurement. 3 and photoconductive resistance photoconductive resistance within the working principle is

28、based on the photoelectric effect. In semiconductor photosensitive material ends of mount electrode lead, it contains transparent window sealed in the tube and shell element photoconductive resistance. Photoconductive resistance properties and parameters are: 1) dark resistance photoconductive resis

29、tance at room temperature, total dark conditions stable resistance called dark resistance, at the current flow resistance is called dark current. 2) light resistance photoconductive resistance at room temperature and certain lighting conditions stable resistance measured, right now is called light r

30、esistance of current flow resistance is called light current. 4, volt-ampere characteristics of both ends photoconductive resistance added voltage and current flows through photoconductive resistance of the relationship between called volt-ampere characteristics shown, as shown in figure 5. From the

31、 graph, the approximate linear volt-ampere characteristics that use should be limited, but when the voltage ends photoconductive resistance, lest than shown dotted lines of power consumption area 5, photoelectric characteristics photoconductive resistance between the poles, light when voltage fixed

32、the relationship between with bright current photoelectric characteristics. Called Photoconductive resistance photoelectric characteristics is nonlinear, this is one of the major drawback of photoconductive resistance. 6, spectral characteristics is not the same incident wavelength, the sensitivity

33、of photoconductive resistance is different also. Incidence wavelength and photodetector the relationship between relative sensitivity called spectral characteristics. When used according to the wavelength range by metering, choose different material photoconductive resistance. 7, response time by ph

34、otoconductive resistance after photo-current need light, over a period of time (time) rise to reach its steady value. Similarly, in stop light photo-current also need, over a period of time (down time) to restore the its dark current, this is photoconductive resistance delay characteristics. Photoco

35、nductive resistance rise response time and falling response time about 10-1 10-3s, namely the frequency response is 10Hz 1000Hz, visible photoconductive resistance cannot be used in demand quick response occasion, this is one of the main photoconductive resistance shortcomings. 8 and temperature cha

36、racteristic photoconductive resistance by temperature affects greatly, temperature rise, dark current increase, reduced sensitivity, which is another photoconductive resistance shortcomings. 9, frequency characteristic frequency characteristics refers to an external voltage and incident light, stron

37、g must be photo-current I and incident light modulation frequency, the relationship between the f, photoelectric diode is the frequency characteristic of the photoelectric triode frequency characteristics, this is because of the photoelectric triode shot yankees there capacitance and carrier base-co

38、mbed need times sake. By using the principle of the photoelectric efficiency of optoelectronics manufacturing frequency characteristics of the worst, this is due to capture charge carriers and release charge need a certain times sake. Three, photoelectric sensors Photoelectric sensor is through the

39、light intensity changes into electrical signal changes to achieve control, its basic structure, it first figure 6 by measuring the change of change of converting the light signal, and then using photoelectric element further will light signals into electrical signal by photoelectric sensor general.

40、Illuminant, optical path and optoelectronics. Three components of photoelectric detection method has high precision, fast response, non-contact wait for an advantage, but measurable parameters of simple structure, sensors, form flexible, therefore, photoelectric sensor in the test and control is wid

41、ely used. By photoelectric sensor generally is composed of three parts, they are divided into: transmitter and receiver and detection circuit shown, as shown in figure 7, transmitter aimed at the target launch beam, the launch of the beam from semiconductor illuminant, general light emitting diode (

42、LED), laser diode and infrared emission diode. Beam uninterrupted launch, or change the pulse width. Receivers have photoelectric diode, photoelectric triode, composed si-based ones. In front of the receiver, equipped with optical components such as lens and aperture, etc. In its back is detection c

43、ircuit, it can filter out effective signal and the application of the signal. In addition, the structural components in photoelectric switch and launch plate and optical fiber, triangle reflex plate is solid structure launch device. It consists of small triangle cone of reflective materials, can mak

44、e a beam accurately reflected back from plate, with practical significance. It can be in with the scope of optical axis 0 to 25, make beams change launch Angle from a root almost after launch line, passes reflection or from the rotating polygon.some basic returns. 图7Photoelectric sensor is a kind of

45、 depend on is analyte and optoelectronics and light source, to achieve the relationship between the measured purpose, so the light source photoelectric sensor plays a very important role, photoelectric sensor power if a constant source, power is very important for design, the stability of the stabil

46、ity of power directly affect the accuracy of measurement, commonly used illuminant have the following kinds: 1, leds is a change electric energy into light energy semiconductor devices. It has small volume, low power consumption, long life, fast response, the advantages of high mechanical strength,

47、and can match and integrated circuits. Therefore, widely used in computer, instruments and automatic control equipment. 2, silk light bulb that is one of the most commonly used illuminant, it has rich infrared light. If chosen optoelectronics, constitutes of infrared sensor sensitive colour filter c

48、an be added to the visible tungsten lamps, but only filter with its infrared does illuminant, such, which can effectively prevent other light interference. 3, compared with ordinary light laser laser with energy concentration, directional good, frequency pure, coherence as well as good, is very ideal light sources. The light source, optical path and photoelectric device composition photoelectric sensor used in photoelectric detection, still must be equipped with appropriate measurement circuit. The photoelectric effect to the measurement circuit