2022年消防产品型式认可申请书样本.docx

《2022年消防产品型式认可申请书样本.docx》由会员分享，可在线阅读，更多相关《2022年消防产品型式认可申请书样本.docx（27页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、精选学习资料 - - - - - - - - - 消防产品型式认可申请书APPLICATION FOR TYPE-APPROV AL OF FIRE PRODUCTS 首次申请 /First Application 扩大范畴申请 /Scope Expansion 证书连续申请 /Renewal 换版申请 /Format Change申请企业名称 / Application product category : 加盖公章 /Seal 生产厂名称 / Factory: 申请产品类别 /Category of Product: 填报日期 /Submission Date yyyy/mm/dd：年月日

2、公安部消防产品合格评定中心印制Published by China Certification Center for Fire Products, Ministry of Public Security, PRC名师归纳总结 - - - - - - -第 1 页,共 16 页精选学习资料 - - - - - - - - - 申 请 企 业 须 知1、申请企业必需严格根据消防类产品型式认可实施规章中工 厂基本条件的要求建立并实施有效的质量治理,确保企业的质量 保证才能符合实施规章的基本要求；2、申请企业必需符合消防类产品型式认可实施规章中生产设 备及检验设备的最低配置要求；3、申请企业须严格遵守

3、型式认可程序准时限要求,正常情形下,并应在规定 接到工厂检查通知后的 30 日内应接受工厂条件检查,时间内完成对不符合项的整改工作,自抽样之日起 15 日内将样品 送到指定检测机构进行检验,并按期缴纳相关费用；如遇特别原 因,必需准时通报公安部消防产品合格评定中心；4、申请企业获证后,必需严格根据消防类产品型式认可实施规 就的规定,正确使用型式认可证书和标志；对有违规者,公安 部消防产品合格评定中心将进行庄重处理；5、申请企业获证后, 所生产及销售的产品必需与发证检验样品保 持一样,产品质量必需符合型式认可规章和相关标准要求；如必 须对涉及产品一样性的关键因素,如关键原器件、原材料、关键 设计

4、及主要生产工艺发生变更,以及生产场地搬迁、法人及主要 技术人员发生变更时,获证企业必需准时向公安部消防产品合格 评定中心申报,由中心根据消防类产品型式认可实施规章要 求支配确认工作；未经中心确认,不得生产及销售产品,对违规 者,公安部消防产品合格评定中心将进行庄重处理,由此而导致 的一切责任均由违规企业承担；名师归纳总结 - - - - - - -第 2 页,共 16 页精选学习资料 - - - - - - - - - The Notice of the Applicant 1. The Applicant must not only constitute a quality control

5、and bring into effect which according to the request of the factorys postulate, but also make sure the quality guarantee capacity of the corporation according to the request of the implement rules. 2. The applicant must measure up the lowest configuration requirement of producing equipment and check

6、ing equipment that refers to the The Implement Rules Of The fire fighting product Type-Approval. 3. The applicant must follow the authentication procedure and the time limit requirement. In normal condition, the enterprise should accept the work condition inspection within 30 days after receive the

7、information, and finish the modification of the unaccepted item within stated time. The enterprise should send the sample to the appointed examine institution in 15days after the inspection, and pay for the related bill. The enterprise should declare to CCCF in time if there is any special case. 4.

8、After getting the certificate, the applicant must follow the implement rules strictly and use authorized certificate and symbol correctly. CCCF will sternly punish the foul. 5. After getting the certificate, the applicant must keep the products they produce and sell the same with the inspecting samp

9、les. The quality of the products must measure up the authentication regulations and the correlative standards. If the some key factors that related to the coherence of the products have to be modified, such as key source apparatus, raw material, core design and primary produce technique, as well as

10、the workplace, juridical person and key technical personnel change, the enterprise must declare to CCCF. And CCCF validates the situation according to the implement rules. The enterprise cant produce and sell any products without the validation. CCCF will sternly punish the foul. And the foul is cha

11、rged of all the correlative obligation. 名师归纳总结 - - - - - - -第 3 页,共 16 页精选学习资料 - - - - - - - - - 声 明我代表申请企业正式声明：1本企业遵循“ 诚信第一” 的基本原就,承诺遵守国家有关法律法规及公安部消 防产品合格评定中心（以下简称 CCCF）制定的型式认可实施规章的全部要求 及型式认可程序；2本企业同意按型式认可规章的要求供应评判所需文件和资料, 所供应的信息 均真实有效,否就承担由此引起的一切法律责任；3本企业保证按型式认可合同及相关要求支付型式认可费用,并为实施型式认 可产品型式认可工作供应所

12、需要的资源；4、本企业将妥当保管检验报告、工厂检查报告和型式认可变更确认等型式认可 的相关资料,以备监督检查、飞行检查及有关证后监督工作时使用,公安部消 防产品合格评定中心将不承担获得产品合格型式认可的生产厂或销售商应承担的法律责任；5、本企业完全接受申请企业须知中所涉及的全部内容；Statement I, on the behalf of the Applicant, make the statement hereby: 1. The Applicant is willing to comply with the Implement Rules for Type-Approval formu

13、lation which by China Certification Center for Fire Products So-called as CCCF. The Applicant does agree to submit the necessary documents and information which 2.truthfulness has been ensured by the Applicant, From this otherwise undertakes all legal liability which causes.3. The Applicant guarante

14、e to make the payment in accordance with the Type-Approval Contract and/or the relevant requirement. 4. The Applicant will keeping the relevant information about authentication properly, such as the prove report, jerque report of factory and the validate of the authentication change, which will be u

15、sed in the supervise inspect, sudden inspect and the supervisal task after application. CCCF will not toe the scratch which must be beared by the factory or merchant who get the product eligibility authentication. 5. The Applicant does accept the contents The notice of the Applicantcontained. 申请企业法定

16、代表人 /Authorized Person of the Applicant Firm：签名 Signature/盖章 Seal 名师归纳总结 日期/Date yyyy/mm/dd：年月日第 4 页,共 16 页- - - - - - -精选学习资料 - - - - - - - - - 一、申 请 企 业 名 称 、地 址 及 联 系 方 式Applicant Information 1 申请企业 / Applicant Firm: 1.1 申请企业名称 / Name in Chinese and English: 1.2 申请人地址、邮编/Mailing Address and Postc

17、ode: 注册地址 Registration address：电话 /Tele phone: 邮编：通讯地址 Mailing address：邮编：1.3 法定代表人 / JuridicalPerson: 手机 /Mobile phone 1.4 联系人 / Person to be Contacted: 电话 /Telephone: 手机 /Mobile phone 1.5 传真 /Fax: 1.6 电子邮件 /E-mail: 1.7 组织机构代码 / Organizations and agencies code：1.8 组织性质代码 / Organization nature code

18、：六项的要求填写）2 制造商 / Manufacturer （按本申请书第2.1 制造商 名称 / Name in Chinese and English: 2.2 制造商 地址、邮编 / Manufacturer Address and Postcode: 注册地址 Registration address：电话 /Telephone: 邮编：通讯地址 Mailing address：邮编：2.3 法定代表人 / JuridicalPerson: 手机 /Mobile phone 2.4 联系人 / Person to be Contacted: 电话 /Telephone: 手机 /Mob

19、ile phone 2.5 传真 /Fax: 2.6 电子邮件 /E-mail: 2.7 组织机构代码 / 组织机构代码 / Organizations and agencies code:名师归纳总结 - - - - - - -第 5 页,共 16 页精选学习资料 - - - - - - - - - 3 2.8 组织性质代码 / Organization nature code:（ 按本申请书第六项的要求填写）生产厂 /factory: 3.1 生产厂名称 / Name in Chinese and English: 3.2 实际生产厂地址、邮编 /Address & Postcode：注册

20、地址 Registration address：邮编：通讯地址 Mailing address：邮编：实际生产厂地址 Actual plant address: 邮编：3.3 法定代表人 / Juridical Person （if applicable ）: 电话 /Telephone: 手机 /Mobile phone 3.4 联系人 / Person to be Contacted: 电话 /Telephone: 手机 /Mobile phone 3.5 传真 /Fax: 3.6 电子邮件 /E-mail: 3.7 组织机构代码 Organizations and agencies co

21、de：3.8 组织性质代码 / Organization nature code ：（按本申请书第六项的要求填写）4 企业注册资本 / Enterprise registered capital：（万元 / Ten thousand Yuan）,经营范畴Management scope：；5 单位总人数 /Enterprise total number of people,高级技术职称人数 / High-level technical title population,中级技术职称人数 / Intermediate technical title population,初级技术职称人数 / P

22、rimary technical title population；设计开发技术人员 / Design development technical personnel,生产制造技术人员 /Manufacturing technical personnel,产品检验技术人员 / Product inspection technical personnel,售后服务技术人员 / Post-sale service technical personnel,其他技术人员/ Other technical personnel；（注：上述人数均为所涉及申请产品的人数）名师归纳总结 - - - - - -

23、-第 6 页,共 16 页精选学习资料 - - - - - - - - - 6 申请型式认可产品的最大年生产才能/Application pattern approval product most bumper year productivity : ；（例：灭火器 XX 具/年；防火门 XXX 平米 /年；消防应急灯具 XX 具/年等）7 申请型式认可产品使用型式认可标志形式 / The application pattern approval product use pattern approves the symbol form ：A、消防产品身份信息发布及标志 / Fire produ

24、ct status information issue and symbol ；B、一般消防产品型式认可标志 / Ordinary fire product pattern approval symbol ；8 中国代表处或中国办事处名称 , 联系人姓名 , 地址 , 邮编 , 电子邮件、电话、移动电话及传真 / Applicant s representative or local office in China, Person to be contacted, Address & Postcode, E-mail, Telephone, Mobile No. & Fax No.: ；名师归

25、纳总结 - - - - - - -第 7 页,共 16 页精选学习资料 - - - - - - - - - 二、申 请 型 式 认 可 产 品 情 况Product Information for Type-Approval 序号 Serial No. 产品名 称型号规格执行标准商标按产品实施规章中Model and Specification Implemented Standard 自愿填报 相关要求填写 Trademark Name of Product 产品检验挑选相应的国家级消防产品国 家 固 定 灭 火 系 统 和 耐 火 构 件 质 量 监 督 检 验 中 心质量监督检验中心名称

26、 Name of the National Quality Control & Testing Center for Fire Products as Selected 备 注/Note：/Tianjin fire Research Institute （天津）国家消防装备质量监督检验中心/China National Fire Equipment Quality Supervision Center （上海）国家消防电子产品质量监督检验中心 /Shenyang Fire Research Institute （沈阳）国 家 防 火建 筑 材料质 量 监 督 检验 中 心 /Sichuan F

27、ire Research Institute（四川）名师归纳总结 注：如申请企业属证书连续申请, 在备注栏中注明是全部产品或是部分产品换证,并提交申请换证产品型式认可证书复印第 8 页,共 16 页- - - - - - -精选学习资料 - - - - - - - - - 件/ If applies for the enterprise to need to transform the certificate, needs to indicate is the complete product or the 名师归纳总结 partial products, and must submit th

28、e application product the pattern approval certificate copy；第 9 页,共 16 页- - - - - - -精选学习资料 - - - - - - - - - 申请型式认可产品名称、型号及照片与申请产品一一对应 Product Name, Type and Photo for Type-Approval 贴照片处Product Photo 名称 型号名师归纳总结 Name Model 第 10 页,共 16 页- - - - - - -精选学习资料 - - - - - - - - - 贴照片处Product Photo 名称 型号名师

29、归纳总结 Name Model 第 11 页,共 16 页- - - - - - -精选学习资料 - - - - - - - - - 三、申 请 企 业 承 诺我代表申请企业正式承诺：1始终遵守型式认可方案支配的有关规定；2为进行评判作出必要的支配,包括协作检查组的工作、答应检查组进入需进行检查的区域、查阅全部的记录（包括内部审核报告、人员评判文件等）、供应必要的交通工具等；3按合同规定和相关规定,准时缴纳各项费用,准时从“ 中国消防产品信息网” 猎取相关信息；4按有关法律法规、规章的要求,正确使用证书和标志；5谨慎使用产品型式认可结果,不损害公安部消防产品合格评定中心的声誉；不对社会产生误导

30、,不未经许可发表声明；6当证书被暂停、撤销、中止型式认可程序时,立刻停止涉及型式认可内 容的广告及宣扬,并按要求将全部型式认可文件（至少应包含型式认可证 书及型式检验报告）交回公安部消防产品合格评定中心,封存型式认可标志；7在传播媒体中对产品型式认可内容的引用,严格遵守国家的相关要求；申请企业法定代表人签字：加盖公章 名师归纳总结 年月日第 12 页,共 16 页- - - - - - -精选学习资料 - - - - - - - - - Commitment of the Applicant Firm I represent apply for the enterprise to pledge

31、 seriously ：1：Make a Statement related to the certification only in the scope of approved certification 2：In order to carry on the appraisal to make the essential arrangement, including the coordinate inspection teams work, the permission inspection team enters must carry on the inspection the regio

32、n, consult all records including internal check report, personnel to appraise document and so on, to provide the essential transportation vehicle and so on. 3：According to the contract provision and the related stipulation, pay each item of fee promptly, promptly from “Chinese fire prevention produc

33、t information network” gain related information4：According to the relevant law laws and regulations, the rules and regulations request, uses the certificate and the sign correctly 5：The discrete use product authentication result, does not harm the Ministry of Public Security fire prevention product

34、qualified assessment center the prestige; Does not have misleading to the society, not issues the statement without the permission 6：When the certificate is suspended, the cancellation, stops authenticating the procedure, immediately stops involving the authentication content the advertisement and t

35、he propaganda, and will possess the authentication document according to the request to contain authentication certificate and pattern survey report at least returns the Ministry of Public Security fire prevention product qualified assessment center, seals the authentication symbol 7：In the communic

36、ation media to the product authentication contents quotation, should meet the national related requirement Signature：（Signed by the authorized person of the Applicant firm ）Date: 名师归纳总结 - - - - - - -第 13 页,共 16 页精选学习资料 - - - - - - - - - 四、 已 获 证 产 品 情 况Description of the Product Already Obtained CCC

37、F Certification 名师归纳总结 序号产品名称型号规格执行标准证书编号第 14 页,共 16 页Serial Name of Product Model and Standard Certificate serial No. Specification Implemented number- - - - - - -精选学习资料 - - - - - - - - - 五、申 请 材 料 附 件请随本申请书供应如下附件：1、企业营业执照副本和组织代码证书复印件（含年检情形, 并加盖企业印章）；2、申请企业概况、组织机构图及与其对应的部门职责；3、技术文件：1）产品生产技术来源的简要说明；

38、2）产品设计文件（如：产品图纸、设计运算说明书等）:3）产品工艺流程图（注明关键工序和质量掌握点）:4）设备布局平面图；5）原材料、关键件质量掌握文件目录；4、产品关键件或产品特性描述填报表从 网站下载相关表格,并填报 ；注：与申请产品一一对应,并加盖公章5、生产设备和检验设备清单6、企业符合安全要求、劳动爱护要求、环境爱护要求的证明材料7、产品销售流向信息上报表8、全部申请材料的电子文档9、需要提交的其他材料注：以上材料均需一式两份提交；并需签订型式认可合同书（网上下载,同样一式两份）；名师归纳总结 - - - - - - -第 15 页,共 16 页精选学习资料 - - - - - - -

39、 - - 六、组织性质代码 Organization nature code01=政府机关 / Governmental agency 02=事业单位 / Institution 03=社会团体 / Social group 04=企业组织 / The enterprise organizes 0401 有限责任公司 / Limited liability company 组织性质代码 0402 股份有限公司 / Joint-stock company Organization 0403 股份合作制企业 / Stock cooperation system enterprise nature code 0404 全民全部制企业 / System of ownership by the whole people enterprise 0405 集体全部制企业 / Collective ownership enterprise 0406 合伙企业 / Partnership enterprise 0407 个人独资企业 / Individual Sole-source investment enterprise 05=其他组织 / 名师归纳总结 - - - - - - -第 16 页,共 16 页