建筑大学毕业设计外文文献及译文--超高层建筑幕墙系统的结构与性能.docx

《建筑大学毕业设计外文文献及译文--超高层建筑幕墙系统的结构与性能.docx》由会员分享，可在线阅读，更多相关《建筑大学毕业设计外文文献及译文--超高层建筑幕墙系统的结构与性能.docx（17页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、建筑大学毕业设计外文文献及译文-超高层建筑幕墙系统的结构与性能 中文4553字 毕业设计 外文文献及译文 文献、资料题目：Construction and Performance of Curtain Wall Systems for Super Highrise Buildings 文献、资料来源：网络 文献、资料发表（出版）日期：2022.4.5 院（部）：机电工程学院 专业：机械制造与自动化 班级：机械1121 姓名： 学号： 指导教师： 翻译日期：2022 年4 月20 日 外文文献： Construction and Performance of Curtain Wall Syste

2、ms for Super Highrise Buildings Raymond WM Wong INTRODUCTION The construction of super highrise buildings has been very active in Hong Kong for decades. Recent renowned projects like the 50-storey Manulife Tower, the 62-storey Cheung Kong Center, the 80-storey “Center”,the 88-storey International Fi

3、nancial Center, and a number of recent residential buildings exceeding 60-storey tall, are without exception, using curtain wall as their external envelope. Using thin wall as external envelope for tall buildings has always been a challenge to designers and builders, in particular in terms of cost,

4、energy, water-tightness, installation, dimensional and structural stability, interfacing arrangement with other building components and maintenance etc. Making use of the Hong Kongs experience, the writer wish to highlight some local practices and summarize how such thin wall systems are designed an

5、d installed. USING CURTAIN WALL IN BUILDIGNS OF HONG KONG High-rise buildings started to spring up in the skyline of Hong Kong since the 1970s in parallel with her economic take-off from a traditional manufacturing-based industrial economy and transforming herself into an world-renowned internationa

6、l financial centre. High-rise buildings by that time were concentrated in the commercial districts like Central in the Hong Kong Island and Tsim Sha Tsui on the Kowloon Peninsula side. The first generation of buildings using what-so-called a curtain wall system can hardly be described as a full syst

7、em which is usually of proprietary design. The pioneer systems were just external fa?ade/walling designed by local architects and with materials supplied by local manufacturers. The common systems used by that time were in majority stick-type, spandrel and cover, or unit-in-frame systems, constructe

8、d of aluminum sections, sometimes incorporated with large areas of stone slabs to cover up solid walls. They were popular due to their highly adaptability, low cost, easy to design-and-install nature. More deluxe commercial buildings were built in the late 70s as the economy of Hong Kong growing hot

9、ter and hotter. Developers tended to request for systems with higher performance as the external envelop for their buildings, in terms both of appearance, material, construction and maintenance concerns. Due to the relative lack of experience at that stage, the performance of these second generation

10、 curtain wall systems (from late 70s to mid 80s)could still hardly described as satisfactory. Problems like seepage, staining, deformation, deterioration and rapid aging of the jointing materials, were very common to many walling cases, often to a condition that made repair and maintenance almost im

11、possible. The replacement of these walling systems not only costly, but also created great disruption to the normal utilization of the building users, and at the same time badly lowered the property value of the entire premises. The third generation of curtain wall systems roughly started in the mid

12、/late 80s, by the time Hong Kong was experiencing her economic climax before the handing over of her sovereignty back to China in 1997. Accommodated experience in the application of curtain wall systems in high-performance buildings contributed solidly in the process of perfecting these systems. Thr

13、oughout the period, the design and production teams, as well as the manufacturers and the engineering supporting teams, were growing more mature in the mastering of the local situation and market. Most problems appeared in the previous cases have been much effectively taken care of. Systems of this

14、generation are in general much more satisfactorily received by most users. WHAT IS A CURTAIN WALL Metal and glass curtain wall systems have found growing favour in modern architecture. They are easily distinguished from other types of claddings by their thin mullions of horizontal and vertical metal

15、lic bars surrounding an all glass or metal panel. The curtain wall system has evolved rapidly over the last two decades, especially with respect to weather control performance. The early systems presented frequent rain penetration problems; water stain patches would form on the outside or condensati

16、on on the inside mullion surfaces; glazing seals were sometimes pumped out of the rabbet of sealed double glazing window units. However, most of these difficulties were eventually overcome with improved detail design of the system components. Today, most curtain wall manufacturers offer a quality pr

17、oduct line of components which can be used to create one of the best overall exterior wall systems. A curtain wall system is a lightweight exterior cladding which is hung on the building structure, usually from floor to floor. It can provide a variety of exterior appearances but is characterized by

18、narrowly spaced vertical and horizontal caps with glass or metal infill panels. These systems provide a finished exterior appearance and most often a semi-finished interior as well. They are also designed to accommodate structural deflections, control wind-driven rain and air leakage, minimize the e

19、ffects of solar radiation and provide for maintenance-free long term performance. Most of todays metal curtain wall systems are constructed of lightweight aluminum or its alloys, although some may be of steel. COMMON TYPES OF CURTAIN WALL SYSTEMS External wall with large area of glazed portion that

20、carries no superimposed load except wind load is usually termed as curtain wall. Traditionally curtain wall consists of a metal frame system infill with vision or opaque panels, that serves to provide glazing for window openings as well as to cover-up structures like columns, slabs and beams, or som

21、etimes even sections of solid wall. There are many ways to serve the purpose, depending on a number of factors such as the design and budget for the project, layout and shape of the building structure, as well as other architectural or structural requirements. According to the American Architectural

22、 Manufacturers Association, curtain wall systems can be classified in five types, namely, the stick system, unit system, unit and mullion system, panel system, and the column-cover-and-spandrel system. However, due to the introduction of high-performance framing/articulation products and high-streng

23、th structural glass, some newer forms of curtain wall systems such as large-area glazed wall using spider clips, bow mullions, hangers or cable stiffeners as supports and connections, are new systems that cannot easily be classified using traditional concepts. Stick system Curtain wall in stick syst

24、em is a cladding and exterior wall system which is hung on the building structure from floor to floor. It is assembled from various components to include steel or aluminum anchors, mullions (vertical load taking member), rails vision glass, spandrel panels, insulation and metal backing pans. For the

25、 fixing of the system, there are various hardware components such as anchors, connectors, brackets, cramps, setting blocks, corner blocks, gaskets and sealants etc. This system has the following merits/demerits: Merits -Low cost, components can be made in standard design and stocked as proprietary p

26、roduct for use in bulk quantity. -Shorter time for design and fabrication. -Fairly easy to fit the shape and form of a building. -Require relatively simple sections to form the mullions and the backing frame. -The design of the infilling panels can be very flexible and form various combination using

27、 different materials to provide the appearance or fulfill other functional requirements. -With the provision of the spandrel panel (the opaque portion) in the design, more colour or design options can be achieved. -Installation of the system only requires simple tool like a manually operated pulley

28、set-up. -Easier to carry out replacement, alteration and maintenance. Demerits -System is designed on a job-by-job basis -More labour-intensive in the fixing and installation process -Higher risk of leaking due to the existence of large amount of in-situ joints between mullion and panels. -Involveme

29、nt of large number of framing members coming from the mullion, transom or other framing parts that make the fixing at spot quite troublesome and inconsistent. -Less fashionable for the design limited basically to monotonous grid without the elegance that other systems may achieve. Unit System Unit s

30、ystems are composed of modulated panels that are fabricated in factory and delivered to site in one-piece for installation. The panels are fully provided with all the glazing and/or the spandrel panels, incorporated with the required insulation and other architectural features, thus requiring very l

31、imited second-fixed installation works on site. The panels are usually spanned in a floor-to-floor arrangement and may be designed in a number of standard/optional panels such as fully glazed, glazed with opaque panels, fully opaque in metal or stone slab, louvered panels, or other special modules l

32、ike the corner or bayed units. In order to get the best benefit of using this system, units are often produced to an optimistic large size so as to minimize the number of units used. This system has the following merits/demerits: Merits -Easy to install merely by securing the modulated panels onto t

33、he building exterior using fixing/connection devices which are usually very dimensionally flexible. -Saving up a lot of manpower due to ease of installation. -Higher performance units can be produced to meet stringent requirements due to better control under factory environment. -Preferably to be us

34、ed in buildings with large walling area for the economy of scale in production as well as the elimination of countless assembly of minor components on site. Demerits -It takes longer lead time to carry out the coordination, design and fabrication of the system/units. -Require higher dimensional accu

35、racy in the building structure for the fixing of the units. -Lifting appliances may be required to assist the hoisting and installation of the large-sized walling units -Difficult to carry out replacement or maintenance due to the interlocking nature of the modulated units. Unit and mullion system T

36、his is a combination of the stick system and the unit system and may be regarded as a compromise of the two. It is more suitable for use in medium-sized projects so as to balance the factors of lead time, ease of installation and economy of scale. Panel system A panel curtain wall system is similar

37、to a unit system, the difference being that a panel system has homogeneous sheet or cast panel with few joints and may not have separate mullions. Unit systems are made up of smaller components fabricated together to form much complex panels that capable to perform heavier duties or other more speci

38、fic requirements. However, due to the relative simplicity of the system, curtain wall of panel system design may not be able to fulfill the usual requirements most high-rise buildings required under Hong Kongs environment. Its use is therefore more limited to certain kinds of buildings like those of

39、 standardized design for low-income classes or for buildings of industrial purposes. In this case, the panels can be constructed of sheet materials and manufactured in large quantity in very low cost. Column-cover-and-spandrel system Column-cover-and-spandrel system consists of column covers, which

40、are usually made of alloyed aluminum, metal sheet or other laminated/fibre-reinforced sheet, and with glazing components and spandrel panels that fit between them. It resembles certain similarity to a unit-and-mullion system except that the structure of the building is exemplified by the column cove

41、rs. With the exception of the stick system and the unit system, other curtain wall systems are seldom used in Hong Kong. Structural glazing system The merit of using structural glazing system as external wall is to minimize the unglazed elements as much as possible, leaving glass panel almost as the

42、 only glazed surface on the wall. This can be done by providing larger mullion supports which span outward away frm the structural floor of a building. Special clamping devices such as a spider bracket can be used to hold the glazing panel in position. Structural sealant is used to seal up the gap b

43、etween the glazing panels. DESIGN PRINCIPLES FOR EXTERNAL WALL A building enclosure may be broadly defined as a set of interconnecting elements which separate the outside from the inside. These elements would include exterior walls, a roof, other components such as windows and doors, and sometimes e

44、xposed floors. The function of a building enclosure is to control the penetration of snow, wind, rain and sun to the inside and to contain the desired indoor climate. The enclosure must meet many individual requirments but for the purpose of this paper they are limited to the following six: control

45、of air flow, control of heat flow, control over the entry of rain and snow, control of sunlight and other forms of radiant energy, control of water vapour diffusion, accommodation of building movements. The requirement for air tightness and consequently air leakage control is met by most curtain wal

46、l systems because the air barrier of the wall is inherent in the structural properties of glass and aluminum or steel tubes that comprise the system. The continuity of the air barrier (Figure 1) is achieved by the continuity of the glass panel through the air seal at the shoulder flanges of the tubu

47、lar mullion, and through the aluminum section to the other flange surface. The air seal between the lower shoulder flange of the curtain wall mullion and the metal pan of the spandrel panel provides continuity of air tightness to the air barrier metal pan and on to the next mullion connection. Such

48、assemblies are regularly tested using air pressure to determine the structural properties of the glass, metal, and seals and to determine the equivalent leakage area (ELA) that remains. In addition, the Architectural Aluminium Manufacturers Association imposes upon its members many other requirements including a specification that the system must not leak more th