毕业论文外文翻译-STM32简介.doc

《毕业论文外文翻译-STM32简介.doc》由会员分享，可在线阅读，更多相关《毕业论文外文翻译-STM32简介.doc（12页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、A. Introduction of STM32STM32 is based on the family of ARM Cortex-M3 core - designed specifically for embedded applications that require high performance, low cost, low power consumption. The performance is divided into two different series: STM32F103 the Enhanced series and STM32F101 the Basic ser

2、ies. The clock frequency of Enhanced Series is up to 72MHz, the highest performance of similar products; the clock frequency of Basic Series is 36MHz, and the prices of 16 position products significantly enhance the performance of more than 16 position products, is the best choice users to buy them.

3、 The two series are built-in flash from 32K to 128K, is the combination of the maximum capacity of the SRAM and peripheral interfaces. When the clock frequency reaches 72MHz, it executes from Flash and the STM32 power consumption is 36mA, the lowest power consumption in the 32-bit market products, t

4、he equivalent an impressive 0.5mA/MHz.a. STMicroelectronics GroupSTMicroelectronics Group was established in June 1987, is a merger of Italys SGS Microelectronics and the French Thomson semiconductor company. In May 1998, SGS-THOMSON Microelectronics will change the company name to STMicroelectronic

5、s Limited. STMicroelectronics is one of the largest semiconductor companies in the world. From its inception to date, STs growing faster than the overall rate of growth of the semiconductor industry. Since 1999, ST has always been one of the worlds top ten semiconductor companies. According to the l

6、atest industry statistics, STMicroelectronics is the worlds fifth largest semiconductor manufacturer and a world leader in many markets. For example, STMicroelectronics is the worlds largest dedicated analog chips and power conversion chip manufacturers, the worlds largest industrial semiconductor a

7、nd set-top box chip suppliers and discrete devices, mobile phone camera module and car field of integrated circuits highest in the world.STMicroelectronics has the entire group employs nearly 50,000, with 16 state-of-the-art R & D institutions and 39 design and application centers, 15 main manufactu

8、ring plant, and has 78 sales offices in 36 countries. The company is headquartered in Geneva, Switzerland, is also the headquarters of European and emerging markets; companys U.S. headquarters in Dallas, Texas, Carrollton; Asia-Pacific headquarters in Singapore; business in Japan by Tokyo as a headq

9、uarters ; Greater China headquarters in Shanghai, responsible for business in Hong Kong, mainland China and Taiwan.December 8, 1994 for the first time since the completion of the public offering of shares, STMicroelectronics has been in New York Stock Exchange (ticker symbol: STM) and Pan Ou Bali St

10、ock Exchange listed, in June 1998, in Milan, Italy, securities Exchange. STMicroelectronics has nearly 900 million shares in the public offering of shares, of which approximately 71.1% of the shares are publicly traded on the various stock exchanges. Another 27.5% of the stock by STMicroelectronics

11、Holding II BV Limited held its shareholders Finmeccanica and CDP Italian Finmeccanica consortium Areva and France Telecom, the French consortium; remaining 1.4% of treasury shares by STMicroelectronics hold.b. ST ultra-low-power ARM Cortex -M3 microcontrollerSTM32L series of products are based on th

12、e ultra-low-power ARM Cortex-M3 processor core, STMicroelectronics two unique energy-saving technologies: 130nm dedicated low-leakage current manufacturing process and optimize energy-saving architecture to deliver industry-leading energy-saving performance. This series belongs to the lineup 32 STMi

13、croelectronics STM32 microcontroller product family, the product family, a total of 180 balance of product, the full range of products share most of the pin, software and peripherals, excellent compatibility with developers to the maximum design flexibility. c. ST ultra-low-power ARM Cortex -M0 micr

14、ocontrollerSTM32F0 series of products are based on the ultra-low-power ARM Cortex-M0 processor core technology and features, enhanced integration, aimed at the application of ultra-low-cost budget. The family of microcontrollers to shorten the 8-bit and 16-bit micro-controller devices and the perfor

15、mance gap between the 32-bit microcontroller device, the user terminal products in the economy to achieve state-of-the-art complex features.d. ProductsBefore STM32F105 and STM32F107 interconnect family of microcontrollers, STMicroelectronics has introduced the STM32 Access Line Enhanced Series, the

16、series of the USB basic series and enhanced; new products follow the Enhanced Series 72MHz processing frequency. Memory 64KB to 256KB Flash and 20KB to 64KB embedded SRAM. The LQFP64, LQFP100, and LFBGA100 three package in the new series, a different package to maintain the pin out consistency, comb

17、ined with the STM32 platform design philosophy, and developers by selecting the products can be re-optimization function, memory, performance and pin count, with a minimum of hardware changes to meet individual application needs.Until July 1, 2010, the circulation of models:Basic: STM32F101R6 STM32F

18、101C8 STM32F101R8 STM32F101V8 STM32F101RB STM32F101VBEnhanced: STM32F103C8 STM32F103R8 STM32F103V8 STM32F103RBSTM32F103VB STM32F103VE STM32F103ZESTM32 models Description: STM32F103RBT6 chip model, for example, the compositions of the models of seven parts, its naming rules are as follows:(1) STM32:

19、STM32 ARM Cortex-M3 represents kernel of 32-bit microcontrollers.(2) F: F represents the chip sub-series.(3) 103:103 representatives Enhanced Series.(4) R: R This is a representative of the number of pins, where T represents 36 feet, 48 feet, C represents, R represents a 64 feet, V represents the 10

20、0-pin 144-pin, Z represents.(5) B: B a representative of embedded Flash capacity, including 6 on behalf of 32K bytes of Flash, 8 on behalf of 64K bytes Flash, 384K bytes Flash B on behalf of 128K bytes Flash, C on behalf of 256K bytes Flash, D representatives E on behalf of 512K bytes Flash.(6) T: T

21、 a representative of the package, in which H represents BGA package, T represents LQFP package, U represents VFQFPN package.(7) 6:6 This is a representative of the operating temperature range, where 6 represents -40 - 85 , 7 on behalf of -40 - 105 .e. STM32F103 performance characteristicsFeature1. T

22、he kernel: ARM32-bit Cortex-M3 CPU, the maximum operating frequency of 72MHz,1.25DMIPS/MHz. Single-cycle multiply and hardware division.2. Memory: integrated on-chip 32-512KB of Flash memory and 6-64KB SRAM memory.3. Clock reset and power management: 2.0-3 .6 V drive voltage of the power supply and

23、I / O interface, POR, PDR and programmable voltage detector (PVD), 4-16MHz crystal oscillator, embedded 8MHz RC oscillator tuning circuit in the factory, 40 kHz internal RC oscillator circuit. For the CPU clock PLL. With the calibration for the RTC 32kHz crystal.4. Low power consumption: three kinds

24、 of low-power modes: Sleep, stop, standby mode. Powered the VBAT RTC and backup registers.5. Debug mode: serial debug (SWD) and JTAG interfaces.6. DMA: 12-channel DMA controller; supported peripherals: timers, ADC, DAC, SPI, IIC and USART.7.2 12 us class A / D converter (16-channel): A / D measureme

25、nt range: 0-3 .6 V. Dual sample and hold capability. The chip integrates a temperature sensor.8. 2-channel 12-bit D / A converter: STM32F103xC STM32F103xD STM32F103xE unique.9. A maximum of up to 112 fast I / O ports: Depending on the model, 26,37,51,80, and 112 I / O ports, all ports can be mapped

26、to the 16 external interrupt vector. In addition to the analog input can accept less than 5V input.10. A maximum of up to 11 timers: four 16-bit timers, each timer 4 IC / OC / PWM or pulse counter. Two 16-channel advanced control timer: up to 6 channels for PWM output. 2 watchdog timers (independent

27、 watchdog and window watchdog). Systick timer: 24-bit down counter. Two 16-bit basic timer is used to drive the DAC.11. A maximum of up to 13 communication interfaces: two IIC interface (SMBus / PMBus), 5 USART interface (ISO7816 interface, LIN, IrDA compatible, the debugging control), Three SPI int

28、erface (18 Mbit / s), two and IIS reuse, CAN interface (2.0B), USB 2.0 full-speed interface, SDIO interface.12. ECOPACK package: STM32F103xx family of microcontrollers ECOPACK package.System role1. Integrated embedded Flash and SRAM memory, ARM Cortex-M3 core. And compared to the 8/16 devices, the A

29、RM Cortex-M3 32-bit RISC processor provides a higher efficiency of the code. The STM32F103xx microcontroller with an embedded ARM core, so can be compatible with all ARM tools and software.2. Embedded Flash memory and RAM memory: built-up to 512KB embedded Flash, can be used to store programs and da

30、ta. Up to 64KB of embedded SRAM can read and write to the clock speed of the CPU (not wait state).3. A variable static memory (FSMC): FSMC embedded in STM32F103xC, STM32F103xD, STM32F103xE, with four chip select support four modes: Flash, RAM, PSRAM, NOR and NAND. After OR after three FSMC interrupt

31、 lines connected to the NVIC. No read / write FIFO PCCARD outside, the code is executed from the external memory, and does not support the Boot took target frequency equal to SYSCLK / 2 Therefore, when the system clock is 72MHz, external access, according to 36MHz.4. Nested vector interrupt controll

32、er (NVIC): can handle 43 maskable interrupt channels (not including the 16 interrupt lines of Cortex-M3), provides 16 interrupt priority. Tightly coupled NVIC lower interrupt processing delay directly passed to the kernel interrupt entry vector table address, tightly coupled the NVIC kernel interfac

33、e, allows interrupts to be anticipated, after the higher-priority interrupt handling support tail chain, automatically save the state of the processor, interrupt entry automatically resume when the interrupt exit, no instruction intervention.5. The external interrupt / event controller (EXTI): Exter

34、nal interrupt / event controller for 19 to generate an interrupt / event request edge detector lines. Each line can be individually configured to select the trigger event (rising edge, falling edge, or both), can also be individually shielded, a pending register to maintain the state of the interrup

35、t request. When the external line appear longer than internal APB2 clock cycle pulse, EXTI is able to detect. Up to 112 GPIO connected to the 16 external interrupt lines.6. Clock and start: start or system clock selection, but reset when the internal 8MHz crystal was selected as the CPU clock. Can s

36、elect one of 4-16MHz external clock, and will be monitored to determine whether successful. During this period, the controller is disabled and the software interrupt management subsequently also be prohibited. At the same time, if there is a need (for example, encountered an indirect use of crystal

37、failed), PLL clock interrupt management fully available. Multiple pre-comparator can be used to configure the AHB frequency, including high-speed APB (PB2) and low-speed APB (APB1), high-speed APB highest frequency of 72MHz, low-speed APB highest frequency of 36MHz.7. Boot mode: startup, Boot pin is

38、 used to select one of three kinds Boot Options kinds: Import from user Flash memory from the system import, import from SRAM. The Boot import program is located in the system memory for Flash Memory Programming by USART1 re.8. Power supply program: VDD voltage range of 2.0V-3.6V, VDD pin provides a

39、n external power supply through, for I / O and internal regulator. VSSA and VDDA, voltage range of 2.0-3.6V, external analog voltage input for the ADC reset module, RC and PLL VDD range (ADC is limited to 2.4V); VSSA and VDDA must be corresponding connection to VSS and VDD. VBAT, the voltage range o

40、f 1.8-3.6V, VDD invalid for RTC, external 32KHz crystal oscillator and backup registers power supply (via the power switch to achieve).9. Power management: The device has a power-on reset (POR) circuit and power-down reset (PDR). This circuit has been used to ensure that the necessary operating from

41、 2V starts fell to 2V. When VDD drops below a specific lower limit VPOR / PDR, without the need for an external reset circuit, the device can also be held in reset mode. Equipment specific to an embedded programmable voltage detector (PVD) PVD for detecting VDD compare and VPVD limit, will generate

42、an interrupt when VDD to lower than VPVD or VDD greater than VPVD. Interrupt service routine can generate a warning message or MCU will be set to a safe state. PVD is enabled by software.10. Voltage regulator: The regulator has three operation modes: main (MR), low power (LPR) and power-down. MR use

43、d in the traditional sense of the adjustment mode (operating mode), LPR is used in the stop mode, power down in standby mode: regulator output is high impedance, the core circuit power-down; including zero consumption (the contents of the registers and SRAM will be lost).11. The low-power mode: STM3

44、2F103xx support three kinds of low-power mode, so as to achieve the best balance between low-power, short start-up time and wake-up source available. Sleep mode: only the CPU stops working, all peripherals continue to run, wake up the CPU interrupt / event occurs; Stop mode: allows keeping the conte

45、nts of the SRAM and registering with minimal power consumption. The 1.8V regions of the clock are stopped, the PLL, the HSI and the HSE RC oscillators are disabled, and the regulator is set to normal or low-power mode. The device can wake-up from stop mode by external interrupt lines. The external i

46、nterrupt sources can make one of the 16 external interrupt lines, PVD output or TRC warning. Standby mode: the pursuit of minimum power consumption, the internal voltage regulator is turned off, so 1.8V regional power outage. PLL, HSI and the HSE RC oscillators are also closed. Enter standby mode, i

47、n addition to backup register and Standby circuit, SRAM and register contents will be lost. When an external reset (NRST pin), the IWDG, reset, WKUP pin a rising edge or TRC warning occurs, the device out of standby mode. Enters the stop mode or standby mode, TRC, IWDG clock source does not stop.f.

48、Architectural advantagesIn addition to the new features enhanced peripheral interface, STM32 interconnection series also provide the same standard interface with other STM32 microcontroller shared this peripheral enhance application flexibility of the entire product family, so that developers can mu

49、ltiple designs to repeated use of the same software. New STM32 standard peripherals include 10 timers, two 12-Msample / s analog-to-digital converter (Interleaved 2-Msample / s mode), two 12-bit digital-to-analog converters, two I2C interface five the USART interface and three SPI ports. A total of 12 new products peripheral DMA channels, there is a CRC calculation unit, like other STM32 microcontroller supports 96 unique identification number.The new family of microcontr