安卓应用基础毕业论文外文翻译.docx

《安卓应用基础毕业论文外文翻译.docx》由会员分享，可在线阅读，更多相关《安卓应用基础毕业论文外文翻译.docx（18页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、Android Application FundamentalsAndroid applications are written in the Java programming language. The Android SDK tools compile the codealong with any data and resource filesinto anAndroid package, an archive file with an.apksuffix. All the code in a single.apkfile is considered to be one applicati

2、on and is the file that Android-powered devices use to install the application.Once installed on a device, each Android application lives in its own security sandbox:The Android operating system is a multi-user Linux system in which each application is a different user.By default, the system assigns

3、 each application a unique Linux user ID (the ID is used only by the system and is unknown to the application). The system sets permissions for all the files in an application so that only the user ID assigned to that application can access them.Each process has its own virtual machine (VM), so an a

4、pplications code runs in isolation from other applications.By default, every application runs in its own Linux process. Android starts the process when any of the applications components need to be executed, then shuts down the process when its no longer needed or when the system must recover memory

5、 for other applications.In this way, the Android system implements theprinciple of least privilege. That is, each application, by default, has access only to the components that it requires to do its work and no more. This creates a very secure environment in which an application cannot access parts

6、 of the system for which it is not given permission.However, there are ways for an application to share data with other applications and for an application to access system services:Its possible to arrange for two applications to share the same Linux user ID, in which case they are able to access ea

7、ch others files. To conserve system resources, applications with the same user ID can also arrange to run in the same Linux process and share the same VM (the applications must also be signed with the same certificate).An application can request permission to access device data such as the users con

8、tacts, SMS messages, the mountable storage (SD card), camera, Bluetooth, and more. All application permissions must be granted by the user at install time.That covers the basics regarding how an Android application exists within the system. The rest of this document introduces you to:1、The core fram

9、ework components that define your application.2、The manifest file in which you declare components and required device features for your application.3、Resources that are separate from the application code and allow your application to gracefully optimize its behavior for a variety of device configura

10、tions. Application ComponentsApplication components are the essential building blocks of an Android application. Each component is a different point through which the system can enter your application. Not all components are actual entry points for the user and some depend on each other, but each on

11、e exists as its own entity and plays a specific roleeach one is a unique building block that helps define your applications overall behavior.There are four different types of application components. Each type serves a distinct purpose and has a distinct lifecycle that defines how the component is cr

12、eated and destroyed.Here are the four types of application components:ActivitiesAnactivityrepresents a single screen with a user interface. For example, an email application might have one activity that shows a list of new emails, another activity to compose an email, and another activity for readin

13、g emails. Although the activities work together to form a cohesive user experience in the email application, each one is independent of the others. As such, a different application can start any one of these activities (if the email application allows it). For example, a camera application can start

14、 the activity in the email application that composes new mail, in order for the user to share a picture.An activity is implemented as a subclass ofActivityand you can learn more about it in theActivitiesdeveloper guide.ServicesAserviceis a component that runs in the background to perform long-runnin

15、g operations or to perform work for remote processes. A service does not provide a user interface. For example, a service might play music in the background while the user is in a different application, or it might fetch data over the network without blocking user interaction with an activity. Anoth

16、er component, such as an activity, can start the service and let it run or bind to it in order to interact with it.A service is implemented as a subclass ofServiceand you can learn more about it in theServicesdeveloper guide.Content providersAcontent providermanages a shared set of application data.

17、 You can store the data in the file system, an SQLite database, on the web, or any other persistent storage location your application can access. Through the content provider, other applications can query or even modify the data (if the content provider allows it). For example, the Android system pr

18、ovides a content provider that manages the users contact information. As such, any application with the proper permissions can query part of the content provider (such asContactsContract.Data) to read and write information about a particular person.Content providers are also useful for reading and w

19、riting data that is private to your application and not shared. For example, theNote Padsample application uses a content provider to save notes.A content provider is implemented as a subclass ofContentProviderand must implement a standard set of APIs that enable other applications to perform transa

20、ctions. For more information, see theContent Providersdeveloper guide.Broadcast receiversAbroadcast receiveris a component that responds to system-wide broadcast announcements. Many broadcasts originate from the systemfor example, a broadcast announcing that the screen has turned off, the battery is

21、 low, or a picture was captured. Applications can also initiate broadcastsfor example, to let other applications know that some data has been downloaded to the device and is available for them to use. Although broadcast receivers dont display a user interface, they maycreate a status bar notificatio

22、nto alert the user when a broadcast event occurs. More commonly, though, a broadcast receiver is just a gateway to other components and is intended to do a very minimal amount of work. For instance, it might initiate a service to perform some work based on the event.A broadcast receiver is implement

23、ed as a subclass ofBroadcastReceiverand each broadcast is delivered as anIntentobject. For more information, see the BroadcastReceiverclass.A unique aspect of the Android system design is that any application can start another applications component. For example, if you want the user to capture a ph

24、oto with the device camera, theres probably another application that does that and your application can use it, instead of developing an activity to capture a photo yourself. You dont need to incorporate or even link to the code from the camera application. Instead, you can simply start the activity

25、 in the camera application that captures a photo. When complete, the photo is even returned to your application so you can use it. To the user, it seems as if the camera is actually a part of your application.When the system starts a component, it starts the process for that application (if its not

26、already running) and instantiates the classes needed for the component. For example, if your application starts the activity in the camera application that captures a photo, that activity runs in the process that belongs to the camera application, not in your applications process. Therefore, unlike

27、applications on most other systems, Android applications dont have a single entry point (theres nomain()function, for example).Because the system runs each application in a separate process with file permissions that restrict access to other applications, your application cannot directly activate a

28、component from another application. The Android system, however, can. So, to activate a component in another application, you must deliver a message to the system that specifies yourintentto start a particular component. The system then activates the component for you.Activating ComponentsThree of t

29、he four component typesactivities, services, and broadcast receiversare activated by an asynchronous message called anintent. Intents bind individual components to each other at runtime (you can think of them as the messengers that request an action from other components), whether the component belo

30、ngs to your application or another.An intent is created with anIntentobject, which defines a message to activate either a specific component or a specifictypeof componentan intent can be either explicit or implicit, respectively.For activities and services, an intent defines the action to perform (f

31、or example, to view or send something) and may specify the URI of the data to act on (among other things that the component being started might need to know). For example, an intent might convey a request for an activity to show an image or to open a web page. In some cases, you can start an activit

32、y to receive a result, in which case, the activity also returns the result in anIntent(for example, you can issue an intent to let the user pick a personal contact and have it returned to youthe return intent includes a URI pointing to the chosen contact).For broadcast receivers, the intent simply d

33、efines the announcement being broadcast (for example, a broadcast to indicate the device battery is low includes only a known action string that indicates battery is low).The other component type, content provider, is not activated by intents. Rather, it is activated when targeted by a request from

34、aContentResolver. The content resolver handles all direct transactions with the content provider so that the component thats performing transactions with the provider doesnt need to and instead calls methods on theContentResolverobject. This leaves a layer of abstraction between the content provider

35、 and the component requesting information (for security).There are separate methods for activating each type of component:You can start an activity (or give it something new to do) by passing anIntenttostartActivity()orstartActivityForResult()(when you want the activity to return a result).You can s

36、tart a service (or give new instructions to an ongoing service) by passing anIntenttostartService(). Or you can bind to the service by passing anIntenttobindService().You can initiate a broadcast by passing anIntentto methods likesendBroadcast(),sendOrderedBroadcast(), orsendStickyBroadcast().You ca

37、n perform a query to a content provider by callingquery()on aContentResolver. For more information about using intents, see theIntents and Intent Filtersdocument. More information about activating specific components is also provided in the following documents:Activities,Services,BroadcastReceiveran

38、dContent Providers. Declaring componentsThe primary task of the manifest is to inform the system about the applications components. For example, a manifest file can declare an activity as follows: . In theelement, the android:iconattribute points to resources for an icon that identifies the applicat

39、ion.In theelement, theandroid:name attribute specifies the fully qualified class name of the Activitysubclass and theandroid:labelattributes specifies a string to use as the user-visible label for the activity.You must declare all application components this way:1、elements for activities2、elements f

40、or services3、elements for broadcast receivers4、elements for content providersActivities, services, and content providers that you include in your source but do not declare in the manifest are not visible to the system and, consequently, can never run. However, broadcast receivers can be either decla

41、red in the manifest or created dynamically in code (asBroadcastReceiverobjects) and registered with the system by callingregisterReceiver().Declaring component capabilitiesAs discussed above, inActivating Components, you can use anIntentto start activities, services, and broadcast receivers. You can

42、 do so by explicitly naming the target component (using the component class name) in the intent. However, the real power of intents lies in the concept of intent actions. With intent actions, you simply describe the type of action you want to perform (and optionally, the data upon which youd like to

43、 perform the action) and allow the system to find a component on the device that can perform the action and start it. If there are multiple components that can perform the action described by the intent, then the user selects which one to use.The way the system identifies the components that can res

44、pond to an intent is by comparing the intent received to theintent filtersprovided in the manifest file of other applications on the device.When you declare a component in your applications manifest, you can optionally include intent filters that declare the capabilities of the component so it can r

45、espond to intents from other applications. You can declare an intent filter for your component by adding anelement as a child of the components declaration element.For example, an email application with an activity for composing a new email might declare an intent filter in its manifest entry to res

46、pond to send intents (in order to send email). An activity in your application can then create an intent with the “send” action (ACTION_SEND), which the system matches to the email applications “send” activity and launches it when you invoke the intent withstartActivity(). For more about creating in

47、tent filters, see theIntents and Intent Filtersdocument.Declaring application requirementsThere are a variety of devices powered by Android and not all of them provide the same features and capabilities. In order to prevent your application from being installed on devices that lack features needed by your application, its important that you clearly define a profile for the types of devices your application supports by declaring device and software requirements in your manifest file