基于万维网集成产品开发的信息管理系统-外文翻译.docx

《基于万维网集成产品开发的信息管理系统-外文翻译.docx》由会员分享，可在线阅读，更多相关《基于万维网集成产品开发的信息管理系统-外文翻译.docx（18页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、A WWW-Based Information Management System for Rapid and Integrated Mould Product Development1. IntroductionThe widespread use of the Internet and World Wide Web (WWW) has had a signicant effect on the method of inter and intra communication of a manufacturing company. Those efcient inter and intra n

2、et communication tools have helped manufacturing companies to reduce production cost, shorten the lead time to market, implement globalisation and concurrent engineering, and make them rethink all of these issues which are at the heart of competitive manufacturing. In order to enhance competitive ab

3、ility, manufacturing companies must undergo great changes, especially those with globally distributed “partners”. It has been widely recognised that having the capability of rapid product development is a key issue in enhancing corporate competitiveness. This may require the support of information s

4、ystems, especially for companies whose business partners are distributed across the globe. A manufacturing corporation, which is managed by a holding company in Christchurch, New Zealand, is such an international manufacturing group. It has subbranches in Australia and Malaysia.For this company, the

5、 integration of various information systems through WWW is a holistic approach to manage complexity in its product design, development, manufacture, and distribution, so that it can respond quickly to customersrequirements.At present, this company is facing increasing demand by customers for product

6、 variety, low cost, and short delivery time. However, there are some hurdles that prevent the company from meeting these customer requirements. First, at different stages of its tool/mould design and making process, discussions are required so that a tool/mould can be developed to conform with the v

7、arious manufacturing constraints. These discussions are normally among engineers in the companys branches located in different countries through documented letters or e-mail. They are time-consuming and inconvenient to manage. Secondly, many important tool/mould-making process data are not recorded

8、and these data are lost after projects have been nished for a while. The information loss in tool/mould-making, and the delays, errors and long procedures to arrive at product denitions are also caused by lack of supporting information. Sometimes, the same product has to be redesigned because of mis

9、sing records.Hence, a product information management system, which is able to record various data through the whole product development cycle and simultaneously to provide an integrated platform for information sharing among different partners ordepartments, is very important for the company in orde

10、r to shorten its product development cycle and reduce production cost. A WWW-based information management system for rapid and integrated product development has consequently been developed. It consists of several distributed databases with object-oriented structure to store all the tool/mould-makin

11、g and product development information. Through the intra/internets,all the information is published on the Web. This provides an easy way of accessing all the necessary information throughout the whole life cycle of the product development process.However, information accessibility does not mean tha

12、t all the information can be used to support the design and manufacturing processes directly. Sometimes people will be confused when they face so much information and do not know what is useful to them. Therefore, to integrate the available information is a key step for the different partners in the

13、 development cycle of a product to share the information effectively 1. In order to solve this problem, a great effort has been made to develop an integrated information sharing platform in a computer network environment. Some prototypes have been developed, e.g. 15. However, these prototypes have s

14、ome limitations to their applications, especially in a WWW environment. The rst is the requirement for a formal WWW-based distributed database structure with suitable product data models for a manufacturing company, i.e. a decision must be made about what information should be shared and how to repr

15、esent and record the information for product development and for the relevant tool/mould-making processes. In practice, the company production manager usually makes decisions about what information is required, when it is required and how it will be used, depending on the context of the current prob

16、lem 4. The data structure of the product information management system may also vary with the structure and culture of the company. Considering these questions in advance, and collecting all the critical pieces of information for the decision-making, and nally integrating the information and decisio

17、ns into a product model, is usually difcult 5.The critical issues in managing and sharing information for a cross-nation corporation are:1. How to build the databases/knowledge bases with WWW publishing and real-time information accessing mechanisms in a user-friendly operating environment.2. How to

18、 develop a system, which can capture related data and knowledge in real-time and share this data and knowledge to support the product development processes.3. How to develop a platform to integrate the information management system with the software packages that are employed at different stages of

19、the product development process.Boynton 4 suggested that the important issue for developing a design information system to support company-wide design is not the product modelling aspect, but the information dissemination aspect.This paper will discuss the problems mentioned above by presenting a WW

20、W-based integrated product development information management system. This system can support product design and manufacturing processes directly in a WWW environment.2. The System FrameworkThe overall structure of the WWW-based information management system is shown in Figure 1.The system was mainl

21、y built in two parts, namely, a WWW-based information management system and an integrated platform. The rst part includes distributed relational databases,STEP databases and knowledge bases, WWW database tool (WDT), and user interfaces for the different departments of the company, to manage the prod

22、uct information. The second part includes a collaborative communication tool, an information access tool, an incremental process planning (IPP) user interface and a cost optimisation model. This platform is developed by using current WWW development tools (i.e.visual Interdev, JavaScript). The appli

23、cation tools are developed as agents that run in a distributed environment.The distributed relational databases and knowledge bases record all the data and knowledge gathered from the previous product developments in the company. The user interfaces were developed and can be viewed through Internet

24、Explorer, which can be used by the different departments to change and manage the databases and knowledge bases on the intra- or internet. The integrated platform was developed to integrate CAD, CAM, computer simulation packages, and the WWW-based information management system in order to support so

25、-called“smartdrawing” and “smartmanufacturing”.An incremental process planning user interface together with the cost optimisation model were developed to select or plan suitable manufacturing processes for design features from a cost optimisation point of view. The multi-object optimization algorith

26、m for cost has been discussed in 6. The information access tool was designed as a search tool to access all related databases and knowledge bases according to the requirements of the integrated platform. Some of the major models or tools mentioned above will be discussed further in the paper.Fig. 1.

27、 Framework of the WWW-based integrated product development information management system.3. WWW-Based Information Management SystemThe current design and manufacturing practice in a manufacturing company often involves complicated communication, interaction, and data exchange between individuals ins

28、ide or outside the company, e.g. engineers, suppliers, and customers. For example, to design a part, a design engineer may need to access information on process planning to determine the production requirements or the product data management system to nd a similar part and the revision levels. The c

29、hallenge is how to create the related information and knowledge so that it can be shared in real-time. The development of intra/internet communication technology has provided a feasible solution to company-wide knowledge sharing and real-time communication. Hence,a WWW-based distributed database and

30、 knowledge-base management system is a fundamental part of the information integration in a manufacturing company.3.1 Product Data ModelWhen data is added to a database, it becomes a model of that part to which the data refers. As there is an increased need for up-to-date information, an automated d

31、atabase management system (DBMS) was developed based on groups of formalized data modelling rules called product data models. Nowadays, a product data model is usually object oriented. The EXPRESS data modelling language in STEP has provided a useful tool to represent various product data. STEP is a

32、n international standard architecture for modelling a product. Hence, STEP and the object oriented modelling method were used in this project 7. Candadai 8 reported another application of STEP to build a product data model. However, STEP is a developing data modelling architecture and it still has s

33、ome limitations for product data modelling, such as instance data or type data 1. It does not include a mechanism for using classication and inheritance for modelling products in a particular company 9. Because of the limitations of STEP, the data model discussed in this paper was built by both the

34、STEP modelling method and the traditional relational data modelling technique. For data that STEP cannot describe, we created a related object using the object-oriented method and connected it to its STEP object by using relationships. One of the advantages of using an object-oriented database (OODB

35、) is that all the data in the object can be extracted by object identity or found by key. The newly created objects can also be stored. The structure of the OODBS and the STEP database will be discussed in the next section. All data in an object can be read easily and recorded using objectorientedpr

36、ogramming languages (OOPLs) such as EXPRESS, C+or JAVA.3.2Product Information Management System3.2.1OODBMS StructureFigure 2 shows the framework of the distributed object-oriented information management system for plastic mould design and manufacturing, which was developed for a manufacturing compan

37、y in New Zealand. It represents a generic structure of an object oriented database management system (OODBMS ) in the system. As shown in Fig. 2, this information system includes product information, tool information, manufacturing information, and supplier information. These structures of the infor

38、mation systems are built according to the requirements and the structures of the company, i.e. the product design database contains all the design specications, geometric information and other information (i.e. manufacturability, cost).These information systems were built on an object oriented datab

39、ase structure and managed by using CORBA under a distributed computing environment. Detailed information about how to use CORBA to integrate structured databases in multi-operation systems and multi-language environments are addressed well in 1012. Hence, the distributed information management syste

40、m eliminates the need to follow the predened access paths to reach the target data, and makes the data access more exible, even under different operation systems. The structure of the information system facilitates uninterrupted queries and is well suited to the manufacturing environment. All the da

41、tabases in the system were developed in an ORACLE software package. ORACLE supports large databases with multi-user accesses, which is suitable for a distributed multi-user system. All the data in ORACLE databases can be accessed via ODBC and JDBC interfaces by using object oriented programming lang

42、uages (OOPLs) such as Visual C+, Borland Delphi or JAVA. This exibly programmable interfacing ability makes sure that the databases can be accessed more easily and can be further developed.The object hierarchy of an object-oriented database that we developed for a mould/tool design and manufacturing

43、 company in Christchurch is shown in Fig. 3, which contains the detailed contents of the data class that was created, based on the structure of the information in different departments. To support various types of data in the industry, different types of object were developed. The structure of these

44、 objects and the relationships between the objects are very important for both the database management system and the system integration. For instance, it is usual that certain product design knowledge in a knowledge base must be associated with a product number or other identity number, so that it

45、can be correctly and effectively retrieved during production. Figure 3 also shows several custom interface objects, such as product interface, tool interface, and manufacture interface. These interface objects were developed for the different departments in a company by using Internet Explorer to ac

46、cess the databases according to predened privileges.Fig. 2. Distributed information structure for a plastic mould design and manufacturing.Fig. 3. The structure of an OODBMS for mould product development3.2.2STEP Database StructureProduct data are an important factor that must be considered when dec

47、iding dynamic changes of the product development processes.Under the WWW environment, as different CAD/CAM systems are employed by companies, the data sharing or exchange between different systems is very important for achieving rapid product development. Databases based on STEP can support product

48、data exchange among heterogeneous CAD/CAM systems. Proprietary le formats are not suitable for data exchange among different systems. STEP is promising, in that it is emerging as a new standard for the exchange of product data throughout the whole life cycle of products in distributed network enviro

49、nments. Xie et al. 6 and Tuet et al. 13 presented a STEP-based information modelling framework to cover the whole life cycle of mould part design and manufacturing processes. This information modelling framework which is called a step-structure information modelling framework contains four top-down information layers, which are the knowledge layer, parts layer, feature layer, and parametric layer. The parametric layer contains the geometric data