(完整版)OpenGL中创建一个球体动画-使球体在窗口内做自由落体运动..doc

《(完整版)OpenGL中创建一个球体动画-使球体在窗口内做自由落体运动..doc》由会员分享，可在线阅读，更多相关《(完整版)OpenGL中创建一个球体动画-使球体在窗口内做自由落体运动..doc（5页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、_计算机图形学实验报告1、 实验目的和要求利用第七章所学的知识，试在OpenGL中创建一个球体动画，使球体在窗口内做自由落体运动，并在撞击地面后能够反弹回来。并用相应的代码表示出来。2、 实验内容利用glutSolidSphere函数等其它函数，在OpenGL中创建一个球体动画，使球体在窗口内做自由落体运动，并在撞击地面后能够反弹回来3、 实验步骤1）相关算法及原理描述我们所使用的glut实用工具中，正好就有一个绘制球体的现成函数：glutSolidSphere，这个函数在“原点”绘制出一个球体。由于坐标是可以通过glTranslate*和glRotate*两个函数进行随意变换的，所以我们就可

2、以在任意位置绘制球体了。2）运行结果如下图，程序调试成功，并且能正常显示4、 实验总结通过本次试验，进一步认识，感觉OpenGL的功能很强大，各种各样的物理模拟实验他都不在话下！不得不说，这软件很好很强大!由于自己不太擅长编程，所以有些功能还不能完全实现，但我会尽自己最大努力来克服自己的编程不足之处，多加练习。 5、附录带注释的源程序#include glut.h#include#include#include#include#define PI 3.1415926double move=20.0;int i=0;int down=1;int count=1;double timeSpan=0

3、; /下降到底所需时间double movey=0.0;double duration=0.0; /持续时间double length=0.0;clock_t start,end;void init(void) GLfloat mat_specular=220.220,220.0,220.0,220.0; GLfloat mat_shininess=100.0; GLfloat light_position=0.0, 0.0, 0.0, -2.0; /r-l u-d f-b GLfloat ambientLight = 0.2f, 0.2f, 0.2f, 1.0f ; GLfloat diff

4、useLight = 0.6f, 0.6f, 0.6f, 1.0f ; GLfloat specular = 1.0f, 1.0f, 1.0f, 1.0f; glClearColor(0.2,0.2,1.5,2.0); /bgc glColor3ub(100, 100, 215); glShadeModel(GL_SMOOTH); glMaterialfv(GL_FRONT,GL_SPECULAR,mat_specular); glMaterialfv(GL_FRONT,GL_SHININESS,mat_shininess); glLightfv(GL_LIGHT0,GL_AMBIENT,am

5、bientLight); glLightfv(GL_LIGHT0,GL_DIFFUSE,diffuseLight); glLightfv(GL_LIGHT0,GL_SPECULAR,specular); glLightfv(GL_LIGHT0,GL_POSITION,light_position); glEnable(GL_LIGHTING); glEnable(GL_LIGHT0); glEnable(GL_DEPTH_TEST);void reshape(int w,int h) glViewport(0,0,(GLsizei)w,(GLsizei)h); glMatrixMode(GL_

6、PROJECTION); glLoadIdentity(); if(w19.932) move=20; down=1; printf(%i,down); start=clock(); display(); glLoadIdentity(); void MoveSphereDown() if(count=1) start=clock(); count=0; end=clock(); duration = (double)(end - start) /CLOCKS_PER_SEC; length=5*duration*duration; move=20-length; if(move-20) ti

7、meSpan=duration; /记下下降所经历的时间 move=-20; start=clock(); down=0; /向上运动 display(); glLoadIdentity();void TimerFunc2(int value) if(i=0) /left GLfloat light_position=2.0,0.0,0.0,0.0; /r-l u-d f-b glLightfv(GL_LIGHT0,GL_POSITION,light_position); if(i=1) /left-up GLfloat light_position=2.0,2.0,0.0,0.0; /r-l

8、 u-d f-b glLightfv(GL_LIGHT0,GL_POSITION,light_position); if(i=2) /up GLfloat light_position=0.0,2.0,0.0,0.0; /r-l u-d f-b glLightfv(GL_LIGHT0,GL_POSITION,light_position); if(i=3) /up-right GLfloat light_position=-2.0,2.0,0.0,0.0; /r-l u-d f-b glLightfv(GL_LIGHT0,GL_POSITION,light_position); if(i=4)

9、 /right GLfloat light_position=-2.0,0.0,0.0,0.0; /r-l u-d f-b glLightfv(GL_LIGHT0,GL_POSITION,light_position); if(i=5) /right-down GLfloat light_position=-2.0,-2.0,0.0,0.0; /r-l u-d f-b glLightfv(GL_LIGHT0,GL_POSITION,light_position); if(i=6) /down GLfloat light_position=0.0,-2.0,0.0,0.0; /r-l u-d f

10、-b glLightfv(GL_LIGHT0,GL_POSITION,light_position); if(i=7) /down-left GLfloat light_position=2.0,-2.0,0.0,0.0; /r-l u-d f-b glLightfv(GL_LIGHT0,GL_POSITION,light_position); i=(+i)%8; /控制小球旋转的 glutTimerFunc(60,TimerFunc2,1);void TimerFunc1(int value) if(down=1) MoveSphereDown(); if(down=0) MoveSpher

11、eUp(); glutTimerFunc(10,TimerFunc1,0);int main(int argc,char *argv) glutInit(&argc,argv); glutInitDisplayMode(GLUT_DOUBLE|GLUT_RGB); glutInitWindowSize(400,740); glutInitWindowPosition(300,20); glutCreateWindow(argv0); init(); glutDisplayFunc(initDisplay); glutReshapeFunc(reshape); glutTimerFunc(1400,TimerFunc1,0); /毫秒 glutTimerFunc(400,TimerFunc2,1); /毫秒 glutMainLoop(); return 0;5_