ASTM D1525塑料维卡软化温度(Vicat)的测定.docx

《ASTM D1525塑料维卡软化温度(Vicat)的测定.docx》由会员分享，可在线阅读，更多相关《ASTM D1525塑料维卡软化温度(Vicat)的测定.docx（1页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、ASTM D1525塑料维卡软化温度(Vicat)的测定ASTM D1525塑料维卡软化温度(Vicat)的测定一标准名称ASTM D1525 Standard Test Method for Vicat Softening Temperature of PlasticsASTM D1525塑料维卡软化温度(Vicat)的测定ASTM D1525塑料维卡软化温度(Vicat)的测定一适用范围Scope：This test method covers determination of the temperature at which a specified needle penetration

2、occurs when specimens are subjected to specified controlled test conditions. This test method is not recommended for ethyl cellulose, nonrigid poly(vinyl chloride), poly(vinylidene chloride), or other materials having a wide Vicat softening range.ASTM D1525塑料维卡软化温度(Vicat)的测定一相关标准ASTM D1525 塑料维卡软化温度(

3、Vicat)的测定/Standard Test Method for Vicat Softening Temperature of PlasticsISO 306塑料热塑性材料维卡软化温度(VST)的测定/Plastics Thermoplastic materials一 Determination of Vicat softening temperature (VST)GB/T 1633热塑性塑料维卡软化温度(VST)的测定标准/Plastics-Thermoplastic materials- Determination of Vicat softening temperature (VS

4、T)GB/T 8802热塑性塑料管材,、管件 维卡软化温度的测定/Thermoplastics pipes and fitting-Determination of vicat softening temperatureISO 2507.1热塑性塑料管材和管件维卡软化温度第1局部:一般试验方法/Thermoplastics pipes and fittings-Vicat softening temperature - Part 1: General test methodISO 2507-2热塑性塑料管材和管件维卡软化温度第2局部:硬聚氯乙烯(PVC.V)或氯化聚氯 乙烯(PVC-C)管材及

5、管件和高抗冲聚氯乙烯(PVC-HI)管材的试验条件/Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVCBS EN ISO 8442-1与食

6、品密切接触的材料和物品.餐具和桌上餐盘,食品制备用餐具的要求 /Materials and articles in contact with foodstuffs. Cutlery and table hollowware . Requirements for cutlery for the preparation of foodEN 1329-1建筑物内土壤和废物排放(低温和高温)的塑料管道系统.未增塑聚(氯乙烯) (PVC-U) .第 1 局部：管道，配件和系统规范/Plastics piping systems for soil and waste discharge(low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes fittings and the systemBS 5577 非金属手柄餐桌用刀叉餐具规范/Specification for table cutlery with non-metallic handles