matlab模块库翻译(16页).doc

《matlab模块库翻译(16页).doc》由会员分享，可在线阅读，更多相关《matlab模块库翻译(16页).doc（16页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、-matlab模块库翻译-第 16 页SimulinkAerospace BlocksetAerospace ToolboxBioinformatics Toolbox *Communications System ToolboxComputer Vision System ToolboxControl System ToolboxCurve Fitting ToolboxData Acquisition ToolboxDatabase ToolboxDatafeed ToolboxDO Qualification KitDSP System ToolboxEconometrics Toolb

2、oxEDA Simulator LinkEmbedded CoderFilter Design HDL CoderFinancial Derivatives ToolboxFinancial ToolboxFixed-Income ToolboxFixed-Point ToolboxFuzzy Logic ToolboxGauges BlocksetGlobal Optimization ToolboxIEC Certification KitImage Acquisition ToolboxImage Processing ToolboxInstrument Control ToolboxM

3、apping ToolboxMATLAB Builder EXMATLAB Builder JAMATLAB Builder NEMATLAB CoderMATLAB CompilerMATLAB Distributed Computing ServerMATLAB Report GeneratorModel Predictive Control ToolboxModel-Based Calibration ToolboxNeural Network ToolboxOPC ToolboxOptimization ToolboxParallel Computing ToolboxPartial

4、Differential Equation Toolbox(no release notes)Phased Array System ToolboxPoly space Client for C/C+Poly space Server for C/C+Poly space Client for AdaPoly space Server for AdaPoly space Model Link SL仿真软件航天Blockset航天工具箱生物信息学工具箱*通信系统工具箱计算机视觉系统工具箱控制系统工具箱曲线拟合工具箱数据采集工具箱数据库工具箱Datafeed工具箱做资格工具包DSP系统工具箱计量经

5、济学工具箱EDA模拟器链接嵌入式编码滤波器设计高密度脂蛋白编码器金融衍生工具的工具箱金融工具箱工具箱固定收益定点工具箱模糊逻辑工具箱仪表Blockset全局优化工具箱IEC认证工具包图像采集工具箱图像处理工具箱仪器控制工具箱映射工具箱MATLABBuilderEXMATLAB Builder JAMATLAB Builder东北MATLAB编码器MATLAB编译器MATLAB分布式计算服务器MATLAB报告生成器模型预测控制工具箱基于模型的标定工具箱神经网络工具箱OPC工具箱优化工具箱并行计算工具箱偏微分方程工具箱(没有发行说明)相控阵系统工具箱保利空间客户机为C / C + +保利空间服务器

6、为C / C + +保利空间客户对于艾达保利空间服务器为艾达保利空间模型链接Poly space Model Link TLPoly space UML Link RHReal-Time Windows TargetRF ToolboxRobust Control ToolboxSignal Processing ToolboxSim BiologySim DrivelineSim ElectronicsSim EventsSim HydraulicsSim MechanicsSim PowerSystemsSim RFSim scapeSimulink 3D AnimationSimulin

7、k Code InspectorSimulink CoderSimulink Control DesignSimulink Design OptimizationSimulink Design VerifierSimulink Fixed PointSimulink HDL CoderSimulink PLC CoderSimulink Report GeneratorSimulink Verification and ValidationSpreadsheet Link EXStateflowStatistics ToolboxSymbolic Math ToolboxSystem Iden

8、tification ToolboxSystem TestVehicle Network ToolboxWavelet ToolboxxPC Target保利空间模型链接TL保利空间UML链接猕猴Windows实时目标射频工具箱鲁棒控制工具箱信号处理工具箱Sim生物学Sim动力传动系统Sim电子Sim事件Sim水力学Sim力学Sim PowerSystemsSim射频Sim柱身仿真软件3 d动画仿真软件代码检查员仿真软件编码器仿真软件控制设计仿真软件设计优化仿真软件设计校验Simulink定点Simulink HDL编码器仿真软件PLC编码器仿真软件报告生成器仿真软件验证和确认表格链接例sta

9、teflow统计工具箱符号数学工具箱系统辨识工具箱系统测试车辆网络工具箱小波工具箱xPC目标SimulinkAerospace BlocksetDO Qualification KitGaugesIEC Certification KitReal-Time Windows TargetSim DrivelineSim ElectronicsSim EventsSim HydraulicsSim MechanicsSim PowerSystemsSim RF BlocksetSim scapeSimulink 3D AnimationSimulink Code InspectorSimulink

10、 CoderSimulink Control DesignSimulink Design OptimizationSimulink Design VerifierSimulink Fixed PointSimulink HDL CoderSimulink PLC CoderSimulink Report GeneratorSimulink Verification and ValidationStateflowxPC Target仿真软件航天Blockset做资格工具包仪表IEC认证工具包实时窗口目标Sim动力传动系统Sim电子Sim事件Sim水力学Sim力学Sim PowerSystemsS

11、im射频BlocksetSim柱身仿真软件3 d动画仿真软件代码检查员仿真软件编码器仿真软件控制设计仿真软件设计优化仿真软件设计校验Simulink定点Simulink HDL编码器仿真软件PLC编码器仿真软件报告生成器仿真软件验证和确认stateflowxPC目标Commonly Used 常用Commonly used blocksContinuous连续型Define continuous statesDiscontinuities非线性模块Define discontinuous statesDiscrete离散型Define discrete states定义离散状态Logic an

12、d Bit Operations逻辑和位操作Perform logic and bit operationsLookup Tables 查找表Support lookup tablesMath Operations 数学操作Perform math operationsModel Verification模型检测模块Perform model verificationModel-Wide Utilities 模型扩充模块Support model-wide operationsPorts & Subsystems端口&子系统Support ports and subsystemsSignal

13、Attributes 信号属性模块Support signal attributesSignal Routing信号线路模块Support signal routingSinksReceive output from other blocks收到来自其他模块的输出Sources输入源Input to other blocksUser-Defined Functions用户定义函数Support custom functionsAdditional Math & Discrete额外的数学与离散Provide additional math and discrete support提供额外的数学

14、和离散的支持Commonly Used常用Bus CreatorCreate signal bus创造信号总线Bus SelectorSelect signals from incoming bus总线选择器 选择信号从输入总线ConstantGenerate constant value 常数产生恒定值Data Type ConversionConvert input signal to specified data type DemuxExtract and output elements of vector signalDiscrete-Time IntegratorPerform di

15、screte-time integration or accumulation of signalGainMultiply input by constantGroundGround unconnected input portInportCreate input port for subsystem or external inputIntegrator, Integrator LimitedIntegrate signalLogical OperatorPerform specified logical operation on inputMuxCombine several input

16、signals into vectorOutportCreate output port for subsystem or external outputProductMultiply and divide scalars and nonscalars or multiply and invert matricesRelational OperatorPerform specified relational operation on inputsSaturationLimit range of signalScope and Floating ScopeDisplay signals gene

17、rated during simulationSubsystem, Atomic Subsystem, Nonvirtual Subsystem, CodeReuse SubsystemRepresent system within another systemSum, Add, Subtract, Sum of ElementsAdd or subtract inputsSwitchSwitch output between first input and third input based on value of second inputTerminatorTerminate unconn

18、ected output portUnit DelayDelay signal one sample periodVector Concatenate, Matrix ConcatenateConcatenate input signals of same data type to create contiguous output signal总线的创造者创造信号总线总线选择器选择信号从输入总线常数产生恒定值数据类型转换转换输入信号到指定的数据类型多路分配器输出元素的提取和矢量信号离散时间积分器进行离散集成或积累的信号获得由常数乘以输入地面地面无关联的输入端口其创建输入端口子系统或外部输入积分

19、器,积分器有限的集成信号逻辑操作符执行指定的逻辑操作输入多路复用结合几个输入信号向量外港创建输出端口为子系统或外部输出产品nonscalars标量乘法和除法和乘法和逆矩阵或关系操作符执行指定的关系操作的输入饱和限制范围的信号范围和浮动范围显示信号产生仿真子系统,原子子系统,子系统,子系统而来的非虚拟CodeReuse代表系统在另一个系统金额、加、减、笔元素添加或减去输入开关开关输出第一个输入和第三输入之间基于价值的第二输入终结者终止无关联的输出端口单位延迟延迟信号一个采样周期向量连接,连接连接输入信号的矩阵具有相同的数据类型来创建连续的输出信号ContinuousDerivativeOutpu

20、t time derivative of inputIntegrator, Integrator LimitedIntegrate signalPID ControllerSimulate continuous- or discrete-time PID controllersPID Controller (2 DOF)Simulate continuous- or discrete-time two-degree-of-freedom PID controllers Second-Order Integrator, Second-Order Integrator LimitedIntegra

21、te input signal twiceState-SpaceImplement linear state-space systemTransfer FcnModel linear system by transfer functionTransport DelayDelay input by given amount of timeVariable Time Delay, Variable Transport DelayDelay input by variable amount of timeZero-PoleModel system by zero-pole-gain transfer

22、 function连续导数 输出时间导数的输入积分器, 积分器有限的集成号PID控制器 模拟连续或离散PID制器PID控制器 (2自由度)模拟连续或离散二自由度PID控制器二阶积分器, 二阶积分器有限的集成输入信号两次状态空间 实现线性状态空间系统转移fcn模型 线性系统的传递函数运输延迟 延迟输入由给定的时间可变延时, 可变传输延迟延迟输入的变量数量的时间零极点模型 系统的零极点增益传递函数DiscontinuitiesBacklashModel behavior of system with playCoulomb and Viscous FrictionModel discontinui

23、ty at zero, with linear gain elsewhereDead ZoneProvide region of zero outputDead Zone DynamicSet inputs within bounds to zeroHit CrossingDetect crossing pointQuantizerDiscretize input at specified intervalRate LimiterLimit rate of change of signalRate Limiter DynamicLimit rising and falling rates of

24、 signalRelaySwitch output between two constantsSaturationLimit range of signalSaturation DynamicBound range of inputWrap To ZeroSet output to zero if input is above threshold非线性反弹模型 行为的系统与游戏库仑和粘滞摩擦模型 不连续面为零,与其他线性增益死区提供地区零输出死区动态设置输入范围内为零打交叉检测交叉点量化器使离散输入指定的时间间隔速率限制器限制的变动率信号速度限制器动态限制利率上升和下降的信号继电器开关输出两个

25、常量之间饱和限制范围的信号饱和动态绑定范围的输入包装为零设置输出为零,如果输入高于阈值DiscreteDelayDelay input signal by fixed or variable sample periodsDifferenceCalculate change in signal over one time stepDiscrete DerivativeCompute discrete-time derivativeDiscrete FilterModel Infinite Impulse Response (IIR) direct form II filtersDiscrete

26、FIR FilterModel FIR filtersDiscrete State-SpaceImplement discrete state-space systemDiscrete Transfer FcnImplement discrete transfer functionDiscrete Zero-PoleModel system defined by zeros and poles of discrete transfer functionDiscrete-Time IntegratorPerform discrete-time integration or accumulatio

27、n of signalFirst-Order HoldImplement first-order sample-and-holdMemoryOutput input from previous time stepPID ControllerSimulate continuous- or discrete-time PID controllersPID Controller (2 DOF)Simulate continuous- or discrete-time two-degree-of-freedom PID controllers Tapped DelayDelay scalar sign

28、al multiple sample periods and output all delayed versionsTransfer Fcn First OrderImplement discrete-time first order transfer functionTransfer Fcn Lead or LagImplement discrete-time lead or lag compensatorTransfer Fcn Real ZeroImplement discrete-time transfer function that has real zero and no pole

29、Unit DelayDelay signal one sample periodZero-Order HoldImplement zero-order hold of one sample periodBack to TopLogic and Bit OperationsBit ClearSet specified bit of stored integer to zeroBit SetSet specified bit of stored integer to oneBitwise OperatorSpecified bitwise operation on inputsCombinator

30、ial LogicImplement truth tableCompare To ConstantDetermine how signal compares to specified constantCompare To ZeroDetermine how signal compares to zeroDetect ChangeDetect change in signal valueDetect DecreaseDetect decrease in signal valueDetect Fall NegativeDetect falling edge when signal value de

31、creases to strictly negative value, and its previous value was nonnegativeDetect Fall NonpositiveDetect falling edge when signal value decreases to nonpositive value, and its previous value was strictly positiveDetect IncreaseDetect increase in signal valueDetect Rise NonnegativeDetect rising edge w

32、hen signal value increases to nonnegative value, and its previous value was strictly negativeDetect Rise PositiveDetect rising edge when signal value increases to strictly positive value, and its previous value was nonpositiveExtract BitsOutput selection of contiguous bits from input signalInterval

33、TestDetermine if signal is in specified intervalInterval Test DynamicDetermine if signal is in specified intervalLogical OperatorPerform specified logical operation on inputRelational OperatorPerform specified relational operation on inputsShift ArithmeticShift bits or binary point of signalBack to

34、TopLookup Tables1-D Lookup TableApproximate one-dimensional function2-D Lookup TableApproximate two-dimensional functionDirect Lookup Table (n-D)Index into N-dimensional table to retrieve element, column, or 2-D matrixInterpolation Using PrelookupUse precalculated index and fraction values to accele

35、rate approximation of N-dimensional functionLookup Table DynamicApproximate one-dimensional function using dynamic tablen-D Lookup TableApproximate N-dimensional functionPrelookupCompute index and fraction for Interpolation Using Prelookup blockSine, CosineImplement fixed-point sine or cosine wave u

36、sing lookup table approach that exploits quarter wave symmetryBack to TopMath OperationsAbsOutput absolute value of inputAlgebraic ConstraintConstrain input signal to zeroAssignmentAssign values to specified elements of signalBiasAdd bias to inputComplex to Magnitude-AngleCompute magnitude and/or ph

37、ase angle of complex signalComplex to Real-ImagOutput real and imaginary parts of complex input signalDivideDivide one input by anotherDot ProductGenerate dot product of two vectorsFindFind nonzero elements in arrayGainMultiply input by constantMagnitude-Angle to ComplexConvert magnitude and/or a ph

38、ase angle signal to complex signalMath FunctionPerform mathematical functionMinMaxOutput minimum or maximum input valueMinMax Running ResettableDetermine minimum or maximum of signal over timePermute DimensionsRearrange dimensions of multidimensional array dimensionsPolynomialPerform evaluation of p

39、olynomial coefficients on input valuesProductMultiply and divide scalars and nonscalars or multiply and invert matricesProduct of ElementsCopy or invert one scalar input, or collapse one nonscalar inputReal-Imag to ComplexConvert real and/or imaginary inputs to complex signalReshapeChange dimensiona

40、lity of signalRounding FunctionApply rounding function to signalSignIndicate sign of inputSine Wave FunctionGenerate sine wave, using external signal as time sourceSlider GainVary scalar gain using sliderSqrt, Signed Sqrt, Reciprocal SqrtCalculate square root, signed square root, or reciprocal of sq

41、uare rootSqueezeRemove singleton dimensions from multidimensional signalSum, Add, Subtract, Sum of ElementsAdd or subtract inputsTrigonometric FunctionSpecified trigonometric function on inputUnary MinusNegate inputVector Concatenate, Matrix ConcatenateConcatenate input signals of same data type to

42、create contiguous output signalWeighted Sample Time MathSupport calculations involving sample timeBack to TopModel VerificationAssertionCheck whether signal is zeroCheck Discrete GradientCheck that absolute value of difference between successive samples of discrete signal is less than upper boundChe

43、ck Dynamic GapCheck that gap of possibly varying width occurs in range of signals amplitudesCheck Dynamic Lower BoundCheck that one signal is always less than another signalCheck Dynamic RangeCheck that signal falls inside range of amplitudes that varies from time step to time step Check Dynamic Upp

44、er BoundCheck that one signal is always greater than another signalCheck Input ResolutionCheck that input signal has specified resolution Check Static GapCheck that gap exists in signals range of amplitudesCheck Static Lower BoundCheck that signal is greater than (or optionally equal to) static lower boundCheck Static RangeCheck that signal falls inside fixed range of amplitudes Check Static Upper BoundCheck that signal is less than (or optionally equal to) static upper boundBack to TopModel-Wide UtilitiesBlock Support TableView data type support for Simulink blocksDocBlockCreate te