BS EN 10216-2-2013+A1-2019.pdf

《BS EN 10216-2-2013+A1-2019.pdf》由会员分享，可在线阅读，更多相关《BS EN 10216-2-2013+A1-2019.pdf（54页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、BSI Standards Publication Seamless steel tubes for pressure purposes Technical delivery conditions Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties BS EN 102162:2013+A1:2019 National foreword This British Standard is the UK implementation of EN 102162:2013+A1:20

2、19. It supersedes BS EN 102162:2013, which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by . The UK

3、 participation in its preparation was entrusted to Technical Committee ISE/110, Steel Tubes, and Iron and Steel Fittings. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a

4、contract. Users are responsible for its correct application. The British Standards Institution 2020 Published by BSI Standards Limited 2020 ISBN 978 0 580 95432 0 ICS 23.040.10; 77.140.75 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was publ

5、ished under the authority of the Standards Policy and Strategy Committee on 31 December 2013. Amendments/corrigenda issued since publication DateText affected 31 January 2020Implementation of CEN amendment A1:2019 BRITISH STANDARDBS EN 102162:2013+A1:2019 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE

6、 NORM EN 10216-2:2013+A1 December 2019 ICS 23.040.10; 77.140.75 Supersedes EN 10216-2:2013 English Version Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties Tubes sans soudure en acier p

7、our service sous pression - Conditions techniques de livraison - Partie 2: Tubes en acier non alli et alli avec caractristiques spcifies temprature leve Nahtlose Stahlrohre fr Druckbeanspruchungen - Technische Lieferbedingungen - Teil 2: Rohre aus unlegierten und legierten Sthlen mit festgelegten Ei

8、genschaften bei erhhten Temperaturen This European Standard was approved by CEN on 17 August 2013 and includes Amendment 1 approved by CEN on 23 September 2019. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

9、the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, Fr

10、ench, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgari

11、a, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey

12、and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2019 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.

13、Ref. No. EN 10216-2:2013+A1:2019 E BS EN 102162:2013+A1:2019 EN 10216-2:2013+A1:2019 (E) 2 Contents Page European foreword . 4 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 7 4 Symbols . 8 5 Classification and designation . 8 5.1 Classification . 8 5.2 Designation. 8 6 Information

14、 to be supplied by the purchaser . 9 6.1 Mandatory information . 9 6.2 Options . 9 6.3 Examples of an order . 10 7 Manufacturing process . 10 7.1 Steel making process . 10 7.2 Tube manufacture and delivery conditions . 10 8 Requirements . 12 8.1 General . 12 8.2 Chemical composition . 13 8.3 Mechani

15、cal properties . 19 8.4 Appearance and internal soundness. 25 8.5 Straightness . 25 8.6 Preparation of ends . 25 8.7 Dimensions, masses and tolerances . 26 9 Inspection . 32 9.1 Types of inspection . 32 9.2 Inspection documents . 32 9.3 Summary of inspection and verification testing . 33 10 Sampling

16、 . 34 10.1 Frequency of tests . 34 10.2 Preparation of samples and test pieces . 35 11 Verification test methods . 36 11.1 Chemical analysis . 36 11.2 Tensile test . 36 11.3 Flattening test . 36 11.4 Ring tensile test . 37 11.5 Drift expanding test . 38 11.6 Ring expanding test . 39 11.7 Impact test

17、 . 39 11.8 Leak tightness test . 40 11.9 Dimensional inspection . 40 11.10 Visual examination . 40 BS EN 102162:2013+A1:2019 EN 10216-2:2013+A1:2019 (E) 3 11.11 Non-destructive testing . 40 11.12 Material identification . 41 11.13 Retests, sorting and reprocessing . 41 12 Marking . 41 12.1 Marking t

18、o be applied . 41 12.2 Additional marking . 42 13 Protection . 42 Annex A (informative) Creep rupture strength values . 43 Annex B (informative) Technical changes from the previous edition . 49 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of Direc

19、tive 2014/68/EU aimed to be covered. 50 Bibliography . 51 BS EN 102162:2013+A1:2019 EN 10216-2:2013+A1:2019 (E) 4 European foreword This document (EN 10216-2:2013+A1:2019) has been prepared by Technical Committee CEN/TC 459 SC/10 “Steel tubes, and iron and steel fittings”, the secretariat of which i

20、s held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2020, and conflicting national standards shall be withdrawn at the latest by June 2020. Attention is drawn to the possibility th

21、at some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1 approved by CEN on 23 September 2019. This document supersedes !EN 10216-2:2013. The start and finish of t

22、ext introduced or altered by amendment is indicated in the text by tags !. For the list of the most significant technical changes that !were made in EN 10216-2:2013, see Annex B. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Assoc

23、iation, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard consists of the following parts, under the general title Seamless steel tubes for pressure purposes Tech

24、nical delivery conditions: Part 1: Non-alloy steel tubes with specified room temperature properties Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties (the present document) Part 3: Alloy fine grain steel tubes Part 4: Non-alloy and alloy steel tubes with specifie

25、d low temperature properties Part 5: Stainless steel tubes Another European Standard series covering tubes for pressure purposes is: EN 10217, Welded steel tubes for pressure purposes Technical delivery conditions According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pol