戴尔DELL笔记本最新BIOS-中英文对照表.pdf

《戴尔DELL笔记本最新BIOS-中英文对照表.pdf》由会员分享，可在线阅读，更多相关《戴尔DELL笔记本最新BIOS-中英文对照表.pdf（12页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、有些项目为机器可选配置有些项目为机器可选配置GeneralGeneral 常规信息常规信息OptionOptionSystemSystemInformationInformation系统信息系统信息Lists the the following:DescriptionDescription中文中文This section lists out the primary hardware features of该选项列出系统的主要硬件信息。此处仅提供信息，the system. There are no configurable options in thissection, only inform

2、ation.无法修改。系统信息系统信息oBIOS 版本o机器编号o资产编号oOwnership 编号o出厂日期oOwnership 日期内存信息内存信息System InformationSystem InformationoBIOS VersionoService TagoAsset TagoOwnership TagoManufacture DateoOwnership DateMemory InformationMemory Informationo安装内存容量o可用内容容量o当前内存频率oMemory 通道oMemory 技术oDIMM A 尺寸oDIMM B 尺寸CPUCPU 信息信

3、息oMemory InstalledoMemory AvailableoMemory SpeedoMemory Channel ModeoMemory TechnologyoDIMM A SizeoDIMM B SizeProcessor InformationProcessor InformationoCPU 型号oCPU 核数几核oCPU IDo当前时钟频率o最小时钟频率o最大时钟频率设备信息设备信息oProcessor TypeoCore CountoProcessor IDoCurrent Clock SpeedoMinimum Clock SpeedoMaximum Clock Sp

4、eedDevice InformationDevice Informationo主硬盘容量o光驱型号o系统 eSATA 设备oDock eSATA 设备oo显卡o显卡 BIOS 版本o显存大小o液晶屏类型o分辨率oo声卡oModem 控制器oWi-Fi 设备型号oPrimary Hard DriveoModular Bay DeviceoSystem eSATA DeviceoDock eSATA DeviceooVideo ControlleroVideo BIOS VersionoVideo MemoryoPanel TypeoNative ResolutionooAudio Contro

5、lleroModem ControlleroWi-Fi DeviceoCellular DeviceoBluetooth DeviceBatteryBatteryInformationInformation电池信息电池信息Boot SequenceBoot Sequence启动顺序oCellular Deviceo蓝牙Indicates the primary battery and the media baybattery status. Also displays the AC adapter typeconnected to the system.The computer attempt

6、s to boot from the sequence ofdevices specified in this list:侦测主电池和第二块电池状态，也显示 AC 外接电源的型号。电脑尝试从以以下表顺序启动：Diskette driveUSB Storage DeviceCD/DVD/CD-RW Drive.Internal HDD (IRRT)Cardbus NICOnboard NIC软驱USB 存储设备光驱Internal HDD (IRRT)Cardbus NICOnboard NIC我们可以勾选需要启动的设备。 并在界面右侧对显示This list specifies the ord

7、er that the BIOS searchesdevices when trying to find an operating system toboot. To change the boot order, select the device to bechanged in the list then click the up/down arrows or use我们可以通过选择 UEFI BIOS 启动，点击“Addthe keyboard PgUp/PgDn keys to change the boot orderBoot Option”自定义启动选项。of the device.

8、 The boot devices can also be de-selectedfrom the list using the check boxes.This also where the UEFI boot option can be enable ordisable.Date/TimeDate/TimeDisplays current date and time settings.日期日期/ /时间时间System ConfigurationSystem Configuration 系统配置系统配置OptionOptionDescriptionDescription描述描述启用或禁用主

9、板 LAN 控制器；设置有：Enables or disables the onboard LAN controller. TheIntegrated NICIntegrated NIC集成网卡Default setting: Enabled w/PXEEnabled w/PXEsettings are Disabled, EnabledDisabled, Enabled and Enabled w/PXEEnabled w/PXE.禁用，启用或启用 w/PXEw/PXE；默认设置是启用 w/PXEw/PXE显示当前的日期和时间的设备设置启动的顺序， 可以通过鼠标也可以通过上下键选择。This

10、 field determines how the parallel port on theParallel PortParallel Port并口并口Default setting: ECPECPThis field determines how the integrated serial portSerial PortSerial Port串口串口Default setting: COM1This option configures the operating mode of theSATA OperationSATA OperationSATA 设置internal SATA hard

11、drive controller. The settings areDisabledDisabled, ATAATA, AHCIAHCI, and RAID On RAID On.Default setting: RAID On = SATA is configured tosupport RAID modeUse the check boxes to enable/disable the followingdevices:operates. The settings are DisabledDisabled, COM1COM1, COM2COM2,COM3COM3 and COM4COM4.

12、docking station operates. The settings are Disabled,Disabled,AT, PS2AT, PS2 and ECPECP.并口设置选项：禁用，AT，PS2 和 ECP默认设置是 ECP。串口设置选项：禁用，COM1，COM2，COM3，COM4默认设置是 COM1SATA Operation 设置选项：禁用，ATA ， AHCI 和 Raid On默认设置是 Raid On=SATA 设置支持 Raid请点击复选框启用/禁用下面设备：MiscellaneousMiscellaneousDevicesDevices多种设备设置Internal

13、ModemModule BayExpressCard or PC CardMedia Card, PC Card and 1394External USB PortMicrophoneeSATA PortsHard Drive Free Fall ProtectionCamera / Microphone内置 Modem模块设备ExpressCard 或 PC CardSD 卡, PC 卡和 1394外置 USB 口内置麦克风eSATA 口自由落体硬盘保护摄像头 / 麦克风默认所有设备启用。Default setting: All enabled.This field lets you cho

14、ose the operating mode of theLatitude OnLatitude On；ReaderReaderDefault setting: Enabled EnabledKeyboardKeyboardIlluminationIllumination键盘背景光如没有配键盘背景光如没有配置背景光键盘该项不会置背景光键盘该项不会出现出现This field lets you choose the operating mode of thekeyboard illumination feature. Settings are Disabled,Disabled,Auto ALS

15、 and InputAuto ALS and Input and Auto Input OnlyAuto Input OnlyDefault setting: DisabledDisabledVideoVideo 显示设置显示设置OptionOptionDescriptionDescription描述描述禁用，自动 ALS 调节，自动调节默认设置禁用键盘背景光。Latitude On； Reader.启用或禁用 Latitude On Reader默认启用 Latitude On Reader。键盘背景光设置选择：Enabling ambient light sensor will allow

16、 your system toAmbient LightAmbient LightSensorSensor环境感光器Default setting: DisabledDisabledLCD BrightnessLCD BrightnessLCDLCD 亮度亮度This option (represented by a slider bar for On Batteryand On AC) sets the panel brightness when the ambientlight sensor is off.SecuritySecurity 安全设置安全设置OptionOptionAdmin

17、 PasswordAdmin Password管理员密码DescriptionDescriptionThis field lets you set, change, or delete thesetup password). The admin passwaord enablesseveral security features when set including:描述描述该页面可以设置，修改，或删除Admin 密码。设置在环境观光器关闭时， 可以分别设定连接电源或电池时显示器的亮度。automatically change the brightness of your systemsLCD

18、 panel based on the amount of light in theenvironment.自动根据周围环境改变显示器的亮度默认设置禁用。administrator (admin) password (sometimes called the了 Admin 密码将启用下面安全功能：限制改变 BIOS 设置限制 F12 启动菜单的设备禁止修改 Owner 和 Asset 编号在 POST 界面可以替代 systempasswordRestricts changes to the settings in SetupRestricts the boot devices listed

19、in the F12 BootMenu to those enabled in the Boot Sequencefield.Prohibits changes to the owner and asset tags.默认没有设置 Admin 密码。Substitutes for the system password if thesystem prompts for a password during power注意：如果删除 Admin 密码，System 密码也被删除。Admin 密码可以被使用去删除硬盘密码。但on.是必须首先设置 Admin 密码；如果已经设置了Successful

20、changes to this password take effectimmediately.Default Setting: Not setNot setNOTE:NOTE:If you delete the admin password, the systempassword is also deleted. Also, the adminpassword can be used to delete the HDDpassword. For this reason, you cannot set anadmin password if a system password or HDD i

21、salready set. The admin password must be set firstif used in conjunction with a system and/or HDDpassword.System 密码或硬盘密码， 不能再设置 Admin 密码。System PasswordSystem PasswordThis field lets you set, change, or delete the system系统密码该页面可以设置， 修改， 或删除 System 密码。 之password (previously called the Primary passwor

22、d).前版本将 Primary 密码Default Setting: Not setNot set默认没有设置 System 密码。This field lets you set, change, or delete the password该页面可以设置，修改，或删除硬盘密码。硬盘密码on the systems internal hard disk drive (HDD).Internal HDDInternal HDDPasswordPassword内置硬盘密码内置硬盘密码a system restart. The HDD password travels with thehard dr

23、ive, so the HDD is protected even when installed默认没有设置硬盘密码。in another system.Default Setting: Not setNot setThis option lets you bypass the system and internalHDD password prompts during a system restart orwhen resuming from a standby state. Settings arePassword BypassPassword Bypass密码跳过DisabledDisa

24、bled and Reboot BypassReboot Bypass在系统重启或者休眠恢复状态，让你绕过硬盘和System 密码。设置选项：禁用和重启绕过。将跟随硬盘，将硬盘连接到其他机器， 也需要输入硬Successful changes take place immediately and require盘密码。The system will always prompt for the set system and系统关机到开机冷启动时，仍然需要输入密码。internal HDD password when powered on from an offstate (cold boot).

25、Default Setting: DisabledDisabledThis option lets you determine whether changes to theSystem and HDD passwords are permitted when an该选项启用后是在设置了 Admin 密码后，可以对系统和硬盘密码进行修改和设置，但不能修改 BIOS其他项目；默认选择允许对非 Admin 密码修改。可以在需修改的页面的点击Unlock后， 输入Admin密码对 BIOS 进行修改。默认设置：禁用Password ChangePassword ChangeAdmin password

26、 is set. Use the check box to allow ordisallow changes.密码修改设置Default Setting: Allow Non-Admin PasswordAllow Non-Admin PasswordChanges checkedChanges checkedThis option enforces strong passwords. If enabled, allpasswords must contain at least one uppercaseStrong PasswordStrong Password强安全密码character,

27、 one lowercase character and be at least 8characters long. Enabling this feature automaticallychanges the default minimum password length to 8charactersDefault Setting: DisabledDisabledThis option lets you control whether the TrustedPlatform Module (TPM) in the system is enabled andTPM SecurityTPM S

28、ecurityTPM 安全设置visible to the operating system. When disabled (checkbox is empty), the BIOS will not turn on the TPM duringPOST. The TPM will be non-functional and invisible tothe operating system. When enabled (check box filled)the BIOS will turn the TPM on during POST so the it can启用强大密码功能， 所有的密码设

29、置时必须包括至少一个大写字母和一个小写字母，至少 8 位。默认禁用。TPM 模块在中国大陆区域没有提供。该项让您控制是否在操作系统下是否启用或者可见 TPM。当禁用 TPM 复选框为空 ， 在 POST 界面， BIOS不能启用 TPM。在操作系统下，TPM 不可见，无功能。当启用 TPM，在 POST 界面， BIOS 即可启用 TPM，be used by the operating system.NOTE:NOTE:Disabling this option does not change any settings在操作系统下，TPM 可以正常使用。一旦 TPM 启用，系统将自动重启。y

30、ou may have made to the TPM, nor does it delete可以选择的设置项：不激活、激活、清除 TPM 信息or change any information or keys you may havestored there. It simply turns off the TPM so that itcannot be used. When you re-enable the TPM, itwill function exaclty as it did before it wasdisabled.Once TPM is enabled (check box

31、 filled), system will beshut down and restarted automatically before theavailable settings are visible.The available settings are: DeactivateDeactivate, ActivateActivate, andClearClear.With the TPM in Deactivate mode it will not execute anycommands that use the resources of the TPM, nor will itallow

32、 any access to stored owner information.The Clear setting allows the owner information storedin the TPM to be cleared. Use this to restore the TPM toits defalut state if you lose or forget the ownerauthentication data.丧失追踪功能&rdquo； 。This field lets you activate or disable the BIOS module激活/不激活/关闭&ld

33、quo；interface of the optional Computrace software. Thesettings are DeactivateDeactivate, DisableDisable, and ActivateActivate.默认：不激活。ComputraceComputrace；追踪功能Default Setting: DeactivateDeactivateNOTE:NOTE:The Activate and Disable options will permanatelyactivate or disable the feature and no further

34、changes will be allowed.需要专业软件支持。(国内一般不提供该功能。This field enables or disables the Execute Disable modeCPU XD SupportCPU XD SupportCPU XD 支持Default setting: EnabledEnabledNon-Admin SetupNon-Admin SetupThis option lets you determine whether changes to thesetup option are permited when an administrator当设

35、置了 Admin 密码， 该项可允许/禁用修改 WIFIof the processor. Use the check box to enable / disable启用或禁用 CPU 数据执行保护this feature.默认启用。ChangesChanges非 Admin 修改设置password is set. If disabled the setup option is locked开关设置和 WIFI Catcher 设置by the admin password. It cannot be modified unlesssetup is unlocked. Use the che

36、ck boxes to allow / denyaccess to the Wi-Fi Catcher Changes and / or WirelessSwitch Changes within the system setup.许可不需要管理员密码可以修改或者删除无线设置拒绝需要有效的管理员密码PasswordPasswordConfigurationConfiguration密码配置密码配置Admin SetupAdmin SetupLockoutLockoutAdminAdmin 锁定锁定PerformancePerformance 性能性能OptionOptionMulti Core

37、 SupportMulti Core Support多核支持多核支持DescriptionDescriptionThis field specifies whether the processor will have oneor all cores enabled. Settings are All, 1,All, 1, and 2. 2.Default Setting: AllAllUse the check box to enable / disable the processorIntelIntel；SpeedStepSpeedStep；Default Setting: EnabledE

38、nabledUse the check box to enable / disable the Intel；IntelIntel；TurboBoostTurboBoost；Default Setting: EnabledEnabledPower ManagementPower Management 电源管理电源管理OptionOptionDescriptionDescriptionUse the check box to enable / disable the computer topower up from the off or hibernation state when an AC点击

39、复选框，启用或禁用连接 AC 即可启动电脑。AC BehaviorAC Behavioradapter is inserted.默认：禁用 AC 唤醒。Default Setting: Wake on AC DisabledThis field sets the of days, if any, when you would likeAuto On TimeAuto On Time唤醒时间Default setting: Disabled Disabledthe system to turn on automatically. The settings areDisabledDisabled,

40、 EverydayEveryday, or WeekdaysWeekdays.该界面可以设置唤醒时间。禁用唤醒每天唤醒描述描述TurboBoost； performance.performance mode.描述描述设置 CPU 的核数：所有，1，2默认是启用所有的 CPU 核数This field lets the you prevent users from enteringSetup when an Admin password is set.当设置了Admin 密码， 将阻止其他用户进入BIOS。This field control the minimum and maximum le

41、ngth ofAdmin and System passwords from 1 to 32 characters.密码的最小和最大的字符数设置。点击复选框，启用或禁用 CPU 性能模式默认是启用。点击复选框，启用或禁用 Intel TurboBoost默认是启用。每周唤醒默认关闭唤醒Use the check box to enable / disable the ability for USBdevices to wake the system from Standby.点击复选框，启用或禁用待机后 USB 设备唤醒USB WakeUSB WakeSupportSupportUSB 唤醒D

42、efault setting: Disabled Disabled默认禁用 USB 设备唤醒。NOTE:NOTE:This feature is only functional when the AC power启用 USB 设备唤醒，只作用于外接电源工作状态。adapter is connected. If the AC power adapter is在单独使用电池时，待机后，BIOS 自动切断所有removed during Standby, the BIOS will removepower from all of the USB ports to conservebattery po

43、wer.USB 设备的电源，无法使用 USB 设备唤醒。This field allows the computer to power up from the off关闭或启用远程 LAN 唤醒state when triggered by a special LAN signal or fromHibernate state when triggered by a special wirelessLAN signal. Wake-up from the Standby state isunaffected by this setting and must be enabled in theo

44、perating system.DisabledDisabled 关闭 LAN/WLAN 唤醒.LAN OnlyLAN Only 允许 LAN 唤醒WLAN OnlyWLAN Only 允许 WLAN 唤醒LAN or WLANLAN or WLAN 允许 LAN 和 WLAN唤醒Wake onWake onLAN/WLANLAN/WLAN网络唤醒网络唤醒DisabledDisabled Do not allow the system to poweron when it receives a wake-up signal from the默认：关闭LAN or wireless LAN.LA

45、N OnlyLAN Only Allow the system to be poweredon by special LAN signals.WLAN OnlyWLAN Only Allow the system to be poweredon by special WLAN signals.LAN or WLANLAN or WLAN Allow the system to bepowered on by special LAN or wireless LANsignals.Default setting: Disabled DisabledThis field lets you selec

46、t fast the battery will charge.标准=电池充电时间较长ExpressChargeExpressCharge快速充电Standard = The battery will charge over a longer periodof time.ExpressCharge = Dell fast charging technology (notavailable for all batteries).默认：快速充电Default setting: ExpressChargeExpressChargeCharger BehaviorCharger BehaviorThis

47、 field lets you enable / disable the battery charger.启用或禁用电池充电If diabled, the battery will not lose power when the快速充电=Dell 快速充电技术不适用于所有的电池设置充电设置充电system is connected to an AC adapter but it will notcharge either.如果禁用充电，电池将不被充电。默认：启用充电Default setting: Charger EnabledCharger EnabledPOST BehaviorPOST

48、Behavior 启动相关启动相关OptionOptionDescriptionDescription描述描述Use the check box to enable / disable the BIOS warning点击复选框， 启用或禁用当前电源使用情况的 BIOSmessages when you use certain power adapters. TheAdapter WarningsAdapter WarningsBIOS displays these messages if you attempt to use apower adapter that has too littl

49、e capacity for your电源警告电源警告configuration.Default Setting: EnabledEnabled.This option lets you choose one of two methods toenable the keypad that is embedded in the internalkeyboard.如尝试使用太低容量的电源适配器， BIOS 将显示提示信息。默认：启用数字小键盘的设置选项：警告信息。通过 Fn 键来控制小键盘 ； 必须按住 Fn 键再输入带有小键盘的字母键。通过 Num lk 键来控制小键盘 ；该项设置后，按 Num

50、 LK 键点亮数字锁定灯，直接按带有小键盘的字母键。Fn Key OnlyFn Key Only The keypad is only enabledwhen you hold down the ； key.By Num LkBy Num Lk The keypad is enabled when (1)the Num Lock LED is on and (2) no externalkeyboard is attached. Note that the systemmight not notice immediately when an externalkeyboard is detach