c语言程序设计：现代方法第二版习题答案.doc

《c语言程序设计：现代方法第二版习题答案.doc》由会员分享，可在线阅读，更多相关《c语言程序设计：现代方法第二版习题答案.doc（83页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、Chapter 2Answers to Selected Exercises2. was #2 (a) The program contains one directive (#include) and four statements (three calls of printf and one return).(b) Parkinsons Law:Work expands so as to fill the timeavailable for its completion.3. was #4#include int main(void) int height = 8, length = 12

2、, width = 10, volume; volume = height * length * width; printf(Dimensions: %dx%dx%dn, length, width, height); printf(Volume (cubic inches): %dn, volume); printf(Dimensional weight (pounds): %dn, (volume + 165) / 166); return 0;4. was #6 Heres one possible program:#include int main(void) int i, j, k;

3、 float x, y, z; printf(Value of i: %dn, i); printf(Value of j: %dn, j); printf(Value of k: %dn, k); printf(Value of x: %gn, x); printf(Value of y: %gn, y); printf(Value of z: %gn, z); return 0;When compiled using GCC and then executed, this program produced the following output:Value of i: 5618848Va

4、lue of j: 0Value of k: 6844404Value of x: 3.98979e-34Value of y: 9.59105e-39Value of z: 9.59105e-39The values printed depend on many factors, so the chance that youll get exactly these numbers is small.5. was #10 (a) is not legal because 100_bottles begins with a digit.8. was #12 There are 14 tokens

5、: a, =, (, 3, *, q, -, p, *, p, ), /, 3, and ;. Answers to Selected Programming Projects4. was #8; modified#include int main(void) float original_amount, amount_with_tax; printf(Enter an amount: ); scanf(%f, &original_amount); amount_with_tax = original_amount * 1.05f; printf(With tax added: $%.2fn,

6、 amount_with_tax); return 0;The amount_with_tax variable is unnecessary. If we remove it, the program is slightly shorter:#include int main(void) float original_amount; printf(Enter an amount: ); scanf(%f, &original_amount); printf(With tax added: $%.2fn, original_amount * 1.05f); return 0;Chapter 3

7、Answers to Selected Exercises2. was #2 (a) printf(%-8.1e, x); (b) printf(%10.6e, x); (c) printf(%-8.3f, x); (d) printf(%6.0f, x); 5. was #8 The values of x, i, and y will be 12.3, 45, and .6, respectively.Answers to Selected Programming Projects1. was #4; modified #include int main(void) int month,

8、day, year; printf(Enter a date (mm/dd/yyyy): ); scanf(%d/%d/%d, &month, &day, &year); printf(You entered the date %d%.2d%.2dn, year, month, day); return 0;3. was #6; modified #include int main(void) int prefix, group, publisher, item, check_digit; printf(Enter ISBN: ); scanf(%d-%d-%d-%d-%d, &prefix,

9、 &group, &publisher, &item, &check_digit); printf(GS1 prefix: %dn, prefix); printf(Group identifier: %dn, group); printf(Publisher code: %dn, publisher); printf(Item number: %dn, item); printf(Check digit: %dn, check_digit); /* The five printf calls can be combined as follows: printf(GS1 prefix: %dn

10、Group identifier: %dnPublisher code: %dnItem number: %dnCheck digit: %dn, prefix, group, publisher, item, check_digit); */ return 0;Chapter 4Answers to Selected Exercises2. was #2 Not in C89. Suppose that i is 9 and j is 7. The value of (-i)/j could be either 1 or 2, depending on the implementation.

11、 On the other hand, the value of -(i/j) is always 1, regardless of the implementation. In C99, on the other hand, the value of (-i)/j must be equal to the value of -(i/j). 9. was #6 (a) 63 8 (b) 3 2 1 (c) 2 -1 3 (d) 0 0 0 13. was #8 The expression +i is equivalent to (i += 1). The value of both expr

12、essions is i after the increment has been performed. Answers to Selected Programming Projects2. was #4 #include int main(void) int n; printf(Enter a three-digit number: ); scanf(%d, &n); printf(The reversal is: %d%d%dn, n % 10, (n / 10) % 10, n / 100); return 0;Chapter 5Answers to Selected Exercises

13、2. was #2 (a) 1 (b) 1 (c) 1 (d) 1 4. was #4 (i j) - (i j) 6. was #12 Yes, the statement is legal. When n is equal to 5, it does nothing, since 5 is not equal to 9. 10. was #16 The output is onetwosince there are no break statements after the cases. Answers to Selected Programming Projects2. was #6 #

14、include int main(void) int hours, minutes; printf(Enter a 24-hour time: ); scanf(%d:%d, &hours, &minutes); printf(Equivalent 12-hour time: ); if (hours = 0) printf(12:%.2d AMn, minutes); else if (hours 12) printf(%d:%.2d AMn, hours, minutes); else if (hours = 12) printf(%d:%.2d PMn, hours, minutes);

15、 else printf(%d:%.2d PMn, hours - 12, minutes); return 0;4. was #8; modified #include int main(void) int speed; printf(Enter a wind speed in knots: ); scanf(%d, &speed); if (speed 1) printf(Calmn); else if (speed = 3) printf(Light airn); else if (speed = 27) printf(Breezen); else if (speed = 47) pri

16、ntf(Galen); else if (speed = 63) printf(Stormn); else printf(Hurricanen); return 0;6. was #10 #include int main(void) int check_digit, d, i1, i2, i3, i4, i5, j1, j2, j3, j4, j5, first_sum, second_sum, total; printf(Enter the first (single) digit: ); scanf(%1d, &d); printf(Enter first group of five d

17、igits: ); scanf(%1d%1d%1d%1d%1d, &i1, &i2, &i3, &i4, &i5); printf(Enter second group of five digits: ); scanf(%1d%1d%1d%1d%1d, &j1, &j2, &j3, &j4, &j5); printf(Enter the last (single) digit: ); scanf(%1d, &check_digit); first_sum = d + i2 + i4 + j1 + j3 + j5; second_sum = i1 + i3 + i5 + j2 + j4; tot

18、al = 3 * first_sum + second_sum; if (check_digit = 9 - (total - 1) % 10) printf(VALIDn); else printf(NOT VALIDn); return 0;10. was #14 #include int main(void) int grade; printf(Enter numerical grade: ); scanf(%d, &grade); if (grade 100) printf(Illegal graden); return 0; switch (grade / 10) case 10:

19、case 9: printf(Letter grade: An); break; case 8: printf(Letter grade: Bn); break; case 7: printf(Letter grade: Cn); break; case 6: printf(Letter grade: Dn); break; case 5: case 4: case 3: case 2: case 1: case 0: printf(Letter grade: Fn); break; return 0;Chapter 6Answers to Selected Exercises4. was #

20、10 (c) is not equivalent to (a) and (b), because i is incremented before the loop body is executed. 10. was #12 Consider the following while loop: while () continue; The equivalent code using goto would have the following appearance:while () goto loop_end; loop_end: ; /* null statement */12. was #14

21、 for (d = 2; d * d = n; d+) if (n % d = 0) break;The if statement that follows the loop will need to be modified as well:if (d * d = n) printf(%d is divisible by %dn, n, d);else printf(%d is primen, n);14. was #16 The problem is the semicolon at the end of the first line. If we remove it, the statem

22、ent is now correct: if (n % 2 = 0) printf(n is evenn);Answers to Selected Programming Projects2. was #2 #include int main(void) int m, n, remainder; printf(Enter two integers: ); scanf(%d%d, &m, &n); while (n != 0) remainder = m % n; m = n; n = remainder; printf(Greatest common divisor: %dn, m); ret

23、urn 0;4. was #4 #include int main(void) float commission, value; printf(Enter value of trade: ); scanf(%f, &value); while (value != 0.0f) if (value 2500.00f) commission = 30.00f + .017f * value; else if (value 6250.00f) commission = 56.00f + .0066f * value; else if (value 20000.00f) commission = 76.

24、00f + .0034f * value; else if (value 50000.00f) commission = 100.00f + .0022f * value; else if (value 500000.00f) commission = 155.00f + .0011f * value; else commission = 255.00f + .0009f * value; if (commission 39.00f) commission = 39.00f; printf(Commission: $%.2fnn, commission); printf(Enter value

25、 of trade: ); scanf(%f, &value); return 0;6. was #6 #include int main(void) int i, n; printf(Enter limit on maximum square: ); scanf(%d, &n); for (i = 2; i * i = n; i += 2) printf(%dn, i * i); return 0;8. was #8 #include int main(void) int i, n, start_day; printf(Enter number of days in month: ); sc

26、anf(%d, &n); printf(Enter starting day of the week (1=Sun, 7=Sat): ); scanf(%d, &start_day); /* print any leading blank dates */ for (i = 1; i start_day; i+) printf( ); /* now print the calendar */ for (i = 1; i = n; i+) printf(%3d, i); if (start_day + i - 1) % 7 = 0) printf(n); return 0;Chapter 7An

27、swers to Selected Exercises3. was #4 (b) is not legal. 4. was #6 (d) is illegal, since printf requires a string, not a character, as its first argument. 10. was #14 unsigned int, because the (int) cast applies only to j, not j * k. 12. was #16 The value of i is converted to float and added to f, the

28、n the result is converted to double and stored in d. 14. was #18 No. Converting f to int will fail if the value stored in f exceeds the largest value of type int. Answers to Selected Programming Projects1. was #2 short int values are usually stored in 16 bits, causing failure at 182. int and long in

29、t values are usually stored in 32 bits, with failure occurring at 46341. 2. was #8 #include int main(void) int i, n; char ch; printf(This program prints a table of squares.n); printf(Enter number of entries in table: ); scanf(%d, &n); ch = getchar(); /* dispose of new-line character following number

30、 of entries */ /* could simply be getchar(); */ for (i = 1; i = n; i+) printf(%10d%10dn, i, i * i); if (i % 24 = 0) printf(Press Enter to continue.); ch = getchar(); /* or simply getchar(); */ return 0;5. was #10 #include #include int main(void) int sum = 0; char ch; printf(Enter a word: ); while (c

31、h = getchar() != n) switch (toupper(ch) case D: case G: sum += 2; break; case B: case C: case M: case P: sum += 3; break; case F: case H: case V: case W: case Y: sum += 4; break; case K: sum += 5; break; case J: case X: sum += 8; break; case Q: case Z: sum += 10; break; default: sum+; break; printf(

32、Scrabble value: %dn, sum); return 0;6. was #12 #include int main(void) printf(Size of int: %dn, (int) sizeof(int); printf(Size of short: %dn, (int) sizeof(short); printf(Size of long: %dn, (int) sizeof(long); printf(Size of float: %dn, (int) sizeof(float); printf(Size of double: %dn, (int) sizeof(do

33、uble); printf(Size of long double: %dn, (int) sizeof(long double); return 0;Since the type of a sizeof expression may vary from one implementation to another, its necessary in C89 to cast sizeof expressions to a known type before printing them. The sizes of the basic types are small numbers, so its

34、safe to cast them to int. (In general, however, its best to cast sizeof expressions to unsigned long and print them using %lu.) In C99, we can avoid the cast by using the %zu conversion specification.Chapter 8Answers to Selected Exercises1. was #4 The problem with sizeof(a) / sizeof(t) is that it ca

35、nt easily be checked for correctness by someone reading the program. (The reader would have to locate the declaration of a and make sure that its elements have type t.) 2. was #8 To use a digit d (in character form) as a subscript into the array a, we would write ad-0. This assumes that digits have

36、consecutive codes in the underlying character set, which is true of ASCII and other popular character sets. 7. was #10 const int segments107 = 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 1, 0, 1, 1, 1, 1, 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 1, 0, 1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1

37、, 1, 1, 1, 1, 1, 0, 1, 1;Answers to Selected Programming Projects2. was #2 #include int main(void) int digit_count10 = 0; int digit; long n; printf(Enter a number: ); scanf(%ld, &n); while (n 0) digit = n % 10; digit_countdigit+; n /= 10; printf (Digit: ); for (digit = 0; digit = 9; digit+) printf(%

38、3d, digit); printf(nOccurrences:); for (digit = 0; digit = 9; digit+) printf(%3d, digit_countdigit); printf(n); return 0;5. was #6 #include #define NUM_RATES (int) (sizeof(value) / sizeof(value0)#define INITIAL_BALANCE 100.00int main(void) int i, low_rate, month, num_years, year; double value5; prin

39、tf(Enter interest rate: ); scanf(%d, &low_rate); printf(Enter number of years: ); scanf(%d, &num_years); printf(nYears); for (i = 0; i NUM_RATES; i+) printf(%6d%, low_rate + i); valuei = INITIAL_BALANCE; printf(n); for (year = 1; year = num_years; year+) printf(%3d , year); for (i = 0; i NUM_RATES;

40、i+) for (month = 1; month = 12; month+) valuei += (double) (low_rate + i) / 12) / 100.0 * valuei; printf(%7.2f, valuei); printf(n); return 0;8. was #12 #include #define NUM_QUIZZES 5#define NUM_STUDENTS 5int main(void) int gradesNUM_STUDENTSNUM_QUIZZES; int high, low, quiz, student, total; for (student = 0; student NUM_STUDENTS; student+) printf(Enter grades for student %d: , student + 1