(3.1.1)--3.1Preparationoffabric.pdf

《(3.1.1)--3.1Preparationoffabric.pdf》由会员分享，可在线阅读，更多相关《(3.1.1)--3.1Preparationoffabric.pdf（7页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、Preparation of FabricDraping For Fashion Design .Basic Slim SkirtCONENTS01 Determine the length and the width of the fabrics02 Draw the guideline 03 Pin the side seam and the hems The basic slim skirt is fitted at the waist level,and has a boxy shape below the hipline,with one or two darts on both f

2、ront and back pieces.There can be many variations based on the basic slim skirt.1.Determine the length and the width of the muslin01 Length of the muslin：skirt length+10cm02 Width of the muslin：Front hip width+back hip width+12cm2.Draw the guidelines 01 Draw the center front and the hipline02 Mark t

3、he front waist point,18cm above the hipline03 Draw the front/back side seam 04 Draw the center line05 Draw the line:5cm from front/back side seam06 Draw the hemline,leaving 5 cm seam allowance3.Pin the side seam and the hems 01 Clip along the front/back boundary from the top to the hipline level,the

4、n clip along the hipline close to the front/back side seam02 Pin together the front and the back piece at the side seam below the hipline,leaving the side allowance above the hipline towards the outside 03 Fold inside and pin the hem allowance04 Fold inside 2.5cm at the center front/back Prepare Muslin