ISO 标准动态isp.docx

《ISO 标准动态isp.docx》由会员分享，可在线阅读，更多相关《ISO 标准动态isp.docx（46页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、ISO标准动态（2005.8.32005.9.20）阶段技术委员会标准号标准名称CDTC 22ISO/CD 6460-1摩托车气体排出和燃料消耗的测量方法第1部分：一般试验要求（ISO 6460:1981的修订）Motorcycles Measurement method of gaseous exhaust emissions and fuel consumption Part 1: General test requirement(Revision of ISO 6460:1981)ISO/CD 6460-2摩托车气体排出和燃料消耗的测量方法第2部分：试验循环和特殊试验条件（ISO 646

2、0:1981的修订）Motorcycles Measurement method of gaseous exhaust emissions and fuel consumption Part 2: Test cycles and specific test condition(Revision of ISO 6460:1981)ISO/CD 6460-3摩托车气体排出和燃料消耗的测量方法第3部分：恒速下燃料消耗测量（ISO 6460:1981的修订）Motorcycles Measurement method of gaseous exhaust emissions and fuel cons

3、umption Part 3: Fuel consumption measurement at a constant speed(Revision of ISO 6460:1981)ISO/CD 23013道路车辆车辆玻璃装置用安全玻璃结构强制进入测定玻璃装置系统的试验Road vehicles Determination to forced entry of safety glass constructions used in vehicle glazing Test of glazing systemsTC 23ISO/CD 6532便携式链锯技术数据（ISO 6532:1993的修订）P

4、ortable chain-saws - Technical data (Revision of ISO 6532:1993)ISO/CD 11682割灌机和割草机技术数据（ISO 11682:1993的修订）Brush-cutters and grass-trimmers - Technical data (Revision of ISO 11682:1993)TC 28ISO/CD 13736石油产品和其他液体闪点的测定阿贝尔闭口杯法（ISO 13736:1997的修订）Petroleum products and other liquids - Determination of flas

5、h point - Abel closed cup method (Revision of ISO 13736:1997)TC 34ISO/CD TS 22003食品安全管理体系提供食品安全管理体系审核和认证机构的要求Food safety management systems - Requirements for bodies providing audit and certification of food safety management systemsISO/CD 24557豆类植物水分的测定风干法Pulses - Determination of moisture content

6、- Air-oven methodTC 38ISO/CD 9073-16纺织品无纺布的试验方法第16部分：评估耐水性能（流体静压）试验Textiles - Test methods for nonwovens - Part 16: Evaluation of water resistance (hydrostatic pressure) testISO/CD 9073-17纺织品无纺布的试验方法第17部分：评估渗水性能（喷洒冲击）试验Textiles - Test methods for nonwovens - Part 17: Evaluation of water penetration

7、(spray impact) testISO/CD 9073-18纺织品无纺布的试验方法第18部分：使用抓样拉伸试验测定无纺布料的断裂强度和伸长率Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile testTC 44ISO/CD TR 25901焊接和相关过程词汇Welding and related processes - VocabularyTC 54ISO

8、/CD 3061黑胡椒油（ISO 3061:1979的修订）Oil of black pepper(Revision of ISO 3061:1979)ISO/CD 9841海索草油（ISO 9841:1991的修订）Oil of Hyssop (Hyssopus officinalis Linnaeus) (Revision of ISO 9841:1991)TC 59ISO/CD 21542房屋结构房屋环境的易接近性和可用性Building construction Accessibility and usability of build environmentTC 67ISO/CD 10

9、423石油和天然气工业钻井和生产设备井口和采油设备（ISO 10423:2003的修订）Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment(Revision of ISO 10423:2003)TC 69ISO/CD TR 8550-1批中离散项目检验抽样系统的选择和使用指南第1部分：抽样的一般指南（ISO/TR 8550:1994的修订）Guide to the selection and usage of accept

10、ance sampling systems for inspection of discrete items in lots - Part 1: General guide to acceptance sampling(Revision of ISO/TR 8550:1994)TC 76ISO/CD 22413药用制剂的输液器组合要求、试验Transfer sets for pharmaceutical preparations - Requirements and test methodsTC 98ISO/CD 13823耐久性结构设计的一般原则General principles on t

11、he design of structures for durabilityTC 121IEC/CD 60601-2-16电子医疗设备第2-16部分：血透、血滤和血滤设备的安全和基本性能特殊要求Medical electrical equipment - Part 2-16: Particular requirements for the safety of haemodialysis, haemodiafiltration and haemofiltration equipmentIEC/CD 60601-2-53电子医疗设备第2-53部分：计算机辅助心电描记标准通信协议的安全和基本性能特殊

12、要求Medical electrical equipment, Part 2-53: Particular requirements for the safety and essential performance of a standard communications protocol for computer assisted electrocardiographyTC 126ISO/CD 22303烟叶烟叶特殊亚硝胺的测定使用缓冲剂萃取法Tobacco - Determination of tobacco specific nitrosamines - Method using buf

13、fer extractionTC 131ISO/CD 10770-3液压传动电调制液压控制阀第3部分：两通流量控制阀的试验方法Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 3: Test methods for two-way directional flow control valvesTC 138ISO/CD 25780压力和非压力供水、排灌或排水和下水用塑料管系统以不饱和聚酯（UP）树脂为基础的玻璃纤维增强热固塑料（GRP）系统使用无管沟结构技术安装的部件Plastics pi

14、ping systems for pressure and non-pressure water supply, irrigation or drainage and sewerage - Glass reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Components intended to be installed using trenchless construction techniquesTC 150ISO/CD 23317外科植入物植入材料磷灰石成

15、型能力的体外测量Implants for surgery - In vitro measurement for apatite-forming ability of implant materialsTC 159ISO/CD 1503立体定向及运动方向设计的人类工效学（ISO 1503:1977的修订）Ergonomic requirements for design on spatial orientation and directions of movements (Revision of ISO 1503:1977)ISO/CD 9241-20人类工效学系统的相互作用信息通信设备和服务的

16、可存取指南第20部分：一般指南Ergonomics of human system interaction Accessibility guideline for information communication equipment and services Part 20: General ErgonomicTC 171ISO/CD 24537缩微摄影技术16mm和35mm缩微胶片用卷轴的尺寸Micrographics - Dimensions for reels used for 16 mm and 35 mm microfilmTC 172ISO/CD 10110-7光学和光学仪器光学

17、元件和系统制图准备第7部分：表面疵病公差（ISO 10110-7:1996的修订）Optics and photonics - Preparation of drawings for optical elements and systems - Part 7: Surface imperfection tolerances(Revision of ISO 10110-7:1996)TC 173ISO/CD 23600盲人和盲聋人用辅助产品人行交通信灯的听觉和触觉信号Assistive products for vision impaired persons and vision and hea

18、ring impaired persons - Acoustic and tactile signals for pedestrian traffic lightsTC 190ISO/CD 22036土壤质量用电感耦合等离子原子发射光谱法（ICP AES）测定土壤萃取物中的微量元素Soil quality - Determination of trace elements in extracts of soil by inductively coupled plasma atomic emission spectrometry (ICP AES)TC 195ISO/CD 21873建筑结构机械

19、和设备移动式混凝土轧碎机回应商用规范的术语Building construction machinery and equipment - Mobile concrete crushers - Terminology ans commercial specificationsTC 198ISO/CD 15882保健产品的消毒化学指示器选择、使用和结果解释的指南（ISO 15882:2003的修订）Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpr

20、etation of results(Revision of ISO 15882:2003)TC 202ISO/CD 22493微束分析电子扫描显微镜词汇Micorbeam analysis - Scanning electron microscopy - VocabularyTC 204ISO/CD 24534-1自动车辆和设备识别车辆的电子登记识别（ERI）第1部分：体系结构Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles -

21、Part 1: ArchitectureISO/CD 24534-2自动车辆和设备识别车辆的电子登记识别（ERI）第2部分：操作要求Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 2: Operational requirementsISO/CD 24534-3自动车辆和设备识别车辆的电子登记识别（ERI）第3部分：车辆数据Automatic vehicle and equipment identification

22、- Electronic Registration Identification (ERI) for vehicles - Part 3:Vehicle dataISO/CD 24534-4自动车辆和设备识别车辆的电子登记识别（ERI）第4部分：使用非对称技术的安全通信Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 4: Secure communication using asymetric techniquesD

23、ISIIWISO/DIS 24497-1无损检验金属磁存储第1部分：一般要求Non-destructive testing - Metal magnetic memory - Part 1: General requirementsISO/DIS 24497-2无损检验金属磁存储第2部分：术语和定义Non-destructive testing - Metal magnetic memory - Part 2: Terms and definitionsISO/DIS 24497-3无损检验金属磁存储第3部分：焊缝检测Non-destructive testing - Metal magnet

24、ic memory - Part 3: Inspection of welded jointsTC 8ISO/DIS 8468船舶桥楼布置和相关设备要求和指南（ISO 8468:1990的修订）Ships bridge layout and associated equipment - Requirements and guidelines(Revision of ISO 8468:1990)TC 20ISO/DIS 6771航空航天流体系统和组件压力和温度分类（ISO 6771:1987的修订）Aerospace - Fluid systems and components - Pressu

25、re and temperature classifications(Revision of ISO 6771:1987)ISO/DIS 21849航空器和航天工业数据产品识别和可追溯性（ISO/TS 21849:2003的修订）Aircraft and space - Industrial data - Product identification and traceability(Revision of ISO/TS 21849:2003)TC 22ISO/DIS 4928使用非石油基液压制动液的液压制动系统液压缸的弹性皮碗和密封圈（最高工作温度1200C）（ISO 4928:1980的修

26、订）Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) (Revision of ISO 4928:1980)ISO/DIS 4930使用非石油基液压制动液的液压制动盘式液压缸的弹性密封圈（最高工作温度1500C）（ISO 4930:1978的修订）Road vehicles - Elastome

27、ric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150 degrees C max.) (Revision of ISO 4930:1978)ISO/DIS 6119使用非石油基液压制动液的液压制动盘式液压缸的弹性密封圈（最高工作温度1200C）（ISO 6119:1980的修订）Road vehicles - Elastomeric seals for hydraulic disc brake cylinders

28、 using a non-petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) (Revision of ISO 6119:1980)ISO/DIS 7299-1柴油发动机油泵端面法兰第1部分：喷油泵（ISO 7299:1996的修订）Diesel engines - End-mounting flanges for pumps - Part 1: Fuel injection pumps(Revision of ISO 7299:1996)ISO/DIS 16232-1.2道路车辆流体电路部

29、件的清洁第1部分：词汇Road vehicles - Cleanliness of components of fluid circuits - Part 1: VocabularyISO/DIS 16232-2.2道路车辆流体电路部件的清洁第2部分：采用搅拌提取污垢法Road vehicles - Cleanliness of components of fluid circuits - Part 2: Method of extraction of contaminants by agitationISO/DIS 16232-3.2道路车辆流体电路部件的清洁第3部分：采用加压冲洗提取污垢法

30、Road vehicles - Cleanliness of components of fluid circuits - Part 3: Method of extraction of contaminants by pressure rinsingISO/DIS 16232-4.2道路车辆流体电路部件的清洁第4部分：采用超声波技术提取污垢法Road vehicles - Cleanliness of components of fluid circuits - Part 4: Method of extraction of contaminants by ultrasonic techni

31、quesISO/DIS 16232-5.2道路车辆流体电路部件的清洁第5部分：在功能试验台上提取污垢法Road vehicles - Cleanliness of components of fluid circuits - Part 5: Method of extraction of contaminants on functional test benchISO/DIS 16232-6.2道路车辆流体电路部件的清洁第6部分：采用重量分析测定颗粒质量Road vehicles - Cleanliness of components of fluid circuits - Part 6: P

32、article mass determination by gravimetric analysisISO/DIS 16232-7.2道路车辆流体电路部件的清洁第7部分：采用显微分析测定颗粒大小和计数Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by gravimetric analysisISO/DIS 16232-8.2道路车辆流体电路部件的清洁第8部分：采用显微分析测定颗粒性质Road vehicles - Cleanliness of

33、components of fluid circuits - Part 8: Particle nature by gravimetric analysisISO/DIS 16232-9.2道路车辆流体电路部件的清洁第9部分：采用自动消光颗粒计数器测定颗粒大小和计数Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counterISO/DIS 16232-10.2道路车辆

34、流体电路部件的清洁度第10部分：结果的表示Road vehicles - Cleanliness of components of fluid circuits - Part 10: Expression of resultsTC 23ISO/DIS 4254-5农业机械安全第5部分：动力驱动耕地设备（ISO 4254-5:1992的修订）Agricultural machinery - Safety - Part 5: Power-driven soil-working equipment(Revision of ISO 4254-5:1992)ISO/DIS 9635-1农业灌溉设备灌溉阀

35、第1部分：一般要求（ISO 9635:1990的修订）Agricultural irrigation equipment - Irrigation valves - Part 1: General requirements(Revision of ISO 9635:1990)ISO/DIS 9635-2农业灌溉设备灌溉阀第2部分：隔离阀（ISO 9635:1990的修订）Agricultural irrigation equipment - Irrigation valves - Part 2: Isolating valves(Revision of ISO 9635:1990)ISO/DI

36、S 9635-3农业灌溉设备灌溉阀第3部分：检查阀（ISO 9635:1990的修订）Agricultural irrigation equipment - Irrigation valves - Part 3: Check valves(Revision of ISO 9635:1990)ISO/DIS 9635-4农业灌溉设备灌溉阀第4部分：空气阀（ISO 9635:1990的修订）Agricultural irrigation equipment - Irrigation valves - Part 4: Air valves(Revision of ISO 9635:1990)ISO/

37、DIS 9635-5农业灌溉设备灌溉阀第5部分：控制阀（ISO 9635:1990的修订）Agricultural irrigation equipment - Irrigation valves - Part 5: Control valves(Revision of ISO 9635:1990)ISO/DIS 9911农业灌溉设备手动操作小型塑料阀（ISO 9911:1993的修订）Agricultural irrigation equipment Manually operated small plastics valves(Revision of ISO 9911:1993)ISO/D

38、IS 11783-10农业和林业用拖拉机和机械系列控制和通信数据网第10部分：任务控制器和管理信息系统数据交换Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10: Task controller and management information system data interchangeTC 24ISO/DIS 21501-2粒度分布的测定单粒光作用法第2部分：光散射液体中粒度计数器Determination of p

39、article size distribution - Single particle light-interaction methods - Part 2: Light-scattering liquid-borne particle counterISO/DIS 21501-3粒度分布的测定单粒光作用法第3部分：消光液体中粒度计数器Determination of particle size distribution - Single particle light-interaction methods - Part 3: Light-extinction liquid-borne par

40、ticle counterISO/DIS 21501-4粒度分布的测定单粒光作用法第4部分：清洁空间光散射液体中粒度计数器Determination of particle size distribution - Single particle light-interaction methods - Part 4: Light-scattering airborne particle counter for clean spacesTC 29ISO/DIS 1711-1螺钉和螺母用装配工具技术规范第1部分：手动扳手和套筒（ISO 1711-1:1996的修订）Assembly tools fo

41、r screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets(Revision of ISO 1711-1:1996)ISO/DIS 2351-1螺钉和螺母用装配工具机动螺钉旋具第1部分：一字槽螺钉旋具头（ISO 2351-1:2002的修订）Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1: Screwdriver bits for slotted head scre

42、ws(Revision of ISO 2351-1:2002)ISO/DIS 2725-1螺钉和螺母用装配工具方头传动套筒第1部分：手动套筒（ISO 2725-1:1996的修订）Assembly tools for screws and nuts Square drive sockets - Part 1: Hand-operated sockets(Revision of ISO 2725-1:1996)ISO/DIS 2725-2螺钉和螺母用装配工具方头传动套筒第2部分：机动套筒（ISO 2725-1:1996的修订）Assembly tools for screws and nuts

43、Square drive sockets - Part 2: Machine-operated sockets(Revision of ISO 2725-1:1996)TC 34ISO/DIS 6579:2002/Damd 1食品和饲料的微生物学检测沙门氏菌属的平行法修改1：附录D：动物粪便和初始生产阶段样品的沙门氏菌物种检测Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp. Amendment 1: Annex D: Detection

44、of Salmonella spp. in animal faeces and in samples from the primary production stageISO/DIS 9233-1干酪、干酪皮和加工干酪游酶素含量的测定第1部分：干酪皮分子吸收光谱法（ISO 9233:1991的修订）Cheese, cheese rind and processed cheese - Determination of natamycin content - Part 1: Molecular absorption spectrometric method for cheese rind(Revi

45、sion of ISO 9233:1991)ISO/DIS 9233-2干酪、干酪皮和加工干酪游酶素含量的测定第2部分：干酪、干酪皮和加工干酪高性能液体色谱法（ISO 9233:1991的修订）Cheese, cheese rind and processed cheese - Determination of natamycin content - Part 2: Method using high-performance liquid chromatography for Cheese, cheese rind and processed cheese (Revision of ISO 9

46、233:1991)ISO/DIS 21415-2小麦和小麦粉面筋含量第2部分：采用机械法测定湿面筋含量（ISO 7495:1990的修订）Wheat and wheat flour - Gluten content - Part 2: Determination of wet gluten by mechanical means(Revision of ISO 7945:1990)TC 35ISO/DIS 12944-5色漆和清漆防护漆体系对钢结构的腐蚀防护第5部分：防护漆体系（ISO 12944-5:1998的修订）Paints and varnishes - Corrosion prote

47、ction of steel structures by protective paint systems - Part 5: Protective paint systems(Revision of ISO 12944-5:1998)ISO/DIS 16276-2防护漆体系对钢结构的腐蚀防护干膜的评定、验收准则、粘结力/粘合力（断裂强度）第2部分：横切试验和十字切试验Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a dry fil