基于BP神经网络的车型识别-外文翻译(共19页).doc

《基于BP神经网络的车型识别-外文翻译(共19页).doc》由会员分享，可在线阅读，更多相关《基于BP神经网络的车型识别-外文翻译(共19页).doc（20页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、精选优质文档-倾情为你奉上一、外 文 资 料License Plate Recognition Based On Prior KnowledgeAbstract - In this paper, a new algorithm based on improved BP (back propagation) neural network for Chinese vehicle license plate recognition (LPR) is described. The proposed approach provides a solution for the vehicle license

2、 plates (VLP) which were degraded severely. What it remarkably differs from the traditional methods is the application of prior knowledge of license plate to the procedure of location, segmentation and recognition. Color collocation is used to locate the license plate in the image. Dimensions of eac

3、h character are constant, which is used to segment the character of VLPs. The Layout of the Chinese VLP is an important feature, which is used to construct a classifier for recognizing. The experimental results show that the improved algorithm is effective under the condition that the license plates

4、 were degraded severely.Index Terms - License plate recognition, prior knowledge, vehicle license plates, neural network.I. INTRODUCTIONVehicle License-Plate (VLP) recognition is a very interesting but difficult problem. It is important in a number of applications such as weight-and-speed-limit, red

5、 traffic infringement, road surveys and park security 1. VLP recognition system consists of the plate location, the characters segmentation, and the characters recognition. These tasks become more sophisticated when dealing with plate images taken in various inclined angles or under various lighting

6、, weather condition and cleanliness of the plate. Because this problem is usually used in real-time systems, it requires not only accuracy but also fast processing. Most existing VLP recognition methods 2, 3, 4, 5 reduce the complexity and increase the recognition rate by using some specific feature

7、s of local VLPs and establishing some constrains on the position, distance from the camera to vehicles, and the inclined angles. In addition, neural network was used to increase the recognition rate 6, 7 but the traditional recognition methods seldom consider the prior knowledge of the local VLPs. I

8、n this paper, we proposed a new improved learning method of BP algorithm based on specific features of Chinese VLPs. The proposed algorithm overcomes the low speed convergence of BP neural network 8 and remarkable increases the recognition rate especially under the condition that the license plate i

9、mages were degrade severely.II. SPECIFIC FEATURES OF CHINESE VLPSA. DimensionsAccording to the guideline for vehicle inspection 9, all license plates must be rectangular and have the dimensions and have all 7 characters written in a single line. Under practical environments, the distance from the ca

10、mera to vehicles and the inclined angles are constant, so all characters of the license plate have a fixed width, and the distance between the medium axes of two adjoining characters is fixed and the ratio between width and height is nearly constant. Those features can be used to locate the plate an

11、d segment the individual character.B. Color collocation of the plateThere are four kinds of color collocation for the Chinese vehicle license plate .These color collocations are shown in table I. TABLE ICategory of license plateColor collocationsmall horse power plateblue background and white charac

12、tersmotor truck plateyellow background and black charactersmilitary vehicle and police wagon plateblack background and the white charactersembassy vehicle platewhite background and black charactersMoreover, military vehicle and police wagon plates contain a red character which belongs to a specific

13、character set. This feature can be used to improve the recognition rate.C. Layout of the Chinese VLPSThe criterion of the vehicle license plate defines the characters layout of Chinese license plate. All standard license plates contain Chinese characters, numbers and letters which are shown in Fig.1

14、. The first one is a Chinese character which is an abbreviation of Chinese provinces. The second one is a letter ranging from A to Z except the letter I. The third and fourth ones are letters or numbers. The fifth to seventh ones are numbers ranging from 0 to 9 only. However the first or the seventh

15、 ones may be red characters in special plates (as shown in Fig.1). After segmentation process the individual character is extracted. Taking advantage of the layout and color collocation prior knowledge, the individual character will enter one of the classes: abbreviations of Chinese provinces set, l

16、etters set, letters or numbers set, number set, special characters set.辽BA9083Chinese charactercharacterLetterLetter or numberNumber(a)Typical layout辽BB092警Chinese charactercharacterLetterLetter or numberSpecial redcharacter(b) Special characterFig.1 The layout of the Chinese license plateIII. THE P

17、ROPOSED ALGORITHMThis algorithm consists of four modules: VLP location, character segmentation, character classification and character recognition. The main steps of the flowchart of LPR system are shown in Fig. 2. Firstly the license plate is located in an input image and characters are segmented.

18、Then every individual character image enters the classifier to decide which class it belongs to, and finally the BP network decides which character the character image represents.Image acquisitionPlate locationCharacters segmentation segmentationclassifierChinese characterLetterLetter or numberNumbe

19、rSpecial characterCharacters recognitionFig.2 The flowchart of LPR systemA. Preprocessing the license plate1) VLP LocationThis process sufficiently utilizes the color feature such as color collocation, color centers and distribution in the plate region, which are described in section II. These color

20、 features can be used to eliminate the disturbance of the fake plates regions. The flowchart of the plate location is shown in Fig. 3.Characters edge detectionBinary image segmentingCandidate image detectionVehicle plate extractionFig.3 The flowchart of the plate location algorithmThe regions which

21、structure and texture similar to the vehicle plate are extracted. The process is described as followed: (1) (2)Here, the Gaussian variance is set to be less than W/3 (W is the character stroke width), so gets its maximum value M at the center of the stroke. After convolution, binarization is perform

22、ed according to a threshold which equals T * M (T MaxFFor each character segmentsCalculate the medium point For each two consecutive medium pointsCalculate the distance Calculate the minimum distanceMerge the character segment k and the character segment k +1NF = NF - 1End of algorithm where Nf is t

23、he number of character segments, MaxF is the number of the license plate, and i is the index of each character segment.The medium point of each segmented character is determined by: （3）where is the initial coordinates for the character segment, and is the final coordinate for the character segment.

24、The distance between two consecutive medium points is calculated by: （4）Fig.6 The segmentation resultsB. Using specific prior knowledge for recognition The layout of the Chinese VLP is an important feature (as described in the section II), which can be used to construct a classifier for recognizing.

25、 The recognizing procedure adopted conjugate gradient descent fast learning method, which is an improved learning method of BP neural network10. Conjugate gradient descent, which employs a series of line searches in weight or parameter space. One picks the first descent direction and moves along tha

26、t direction until the minimum in error is reached. The second descent direction is then computed: this direction the “conjugate direction” is the one along which the gradient does not change its direction will not “spoil” the contribution from the previous descent iterations. This algorithm adopted

27、topology 625-35-N as shown in Fig. 7. The size of input value is 625 (25*25 ) and initial weights are with random values, desired output values have the same feature with the input values.Fig. 7 The network topologyAs Fig. 7 shows, there is a three-layer network which contains working signal feed fo

28、rward operation and reverse propagation of error processes. The target parameter is t and the length of network output vectors is n. Sigmoid is the nonlinear transfer function, weights are initialized with random values, and changed in a direction that will reduce the errors.The algorithm was traine

29、d with 1000 images of different background and illumination most of which were degrade severely. After preprocessing process, the individual characters are stored. All characters used for training and testing have the same size (25*25 ).The integrated process for license plate recognition consists o

30、f the following steps:1) Feature extractingThe feature vectors from separated character images have direct effects on the recognition rate. Many methods can be used to extract feature of the image samples, e.g. statistics of data at vertical direction, edge and shape, framework and all pixels values

31、. Based on extensive experiments, all pixels values method is used to construct feature vectors. Each character was reshaped into a column of 625 rows feature vector. These feature vectors are divided into two categories which can be used for training process and testing process. 2) Training modelTh

32、e layout of the Chinese VLP is an important feature, which can be used to construct a classifier for training, so five categories are divided. The training process of numbers is shown in Fig. 8.Fig. 8 The architecture of a neural network for character recognitionAs Fig. 8 shows, firstly the classifi

33、er decides the class of the input feature vector, and then the feature vector enters the neural network correspondingly. After the training process the optimum parameters of the net are stored for recognition. The training and testing process is summarized in Fig. 9.Input character vector for recogn

34、ition 特征向量Neural networkTarget outputerror(a) Training processInput character vector for recognition 特征向量Neural networkoutput(b)Testing processFig.9 The recognition process3) Recognizing modelAfter training process there are five nets which were completely trained and the optimum parameters were sto

35、red. The untrained feature vectors are used to test the net, the performance of the recognition system is shown in Table III. The license plate recognition system is characterized by the recognition rate which is defined by equation (5). Recognition rate =(number of correctly read characters)/ (numb

36、er of found characters) (5)TABLE IIIClassRecognitionNumber99.5%Letter97.4%Chinese character96%Number and letter97.3%Special character98.2%IV. COMPARISON OF THE RECOGNITION RATE WITH OTHER METHODSIn order to evaluate the proposed algorithm, two groups of experiments were conducted. One group is to co

37、mpare the proposed method with the BP based recognition method 11. The result is shown in table IV. The other group is to compare the proposed method with the method based on SVM 12.The result is shown in table V. The same training and test data set are used. The comparison results show that the pro

38、posed method performs better than the BP neural network and SVM counterpart.TABLE IVMethodChinese characterNumberLetterOur method96%99.5%97.4%BP945%97.6%89.8%TABLE VMethodChinese characterNumberLetterOur method96%99.5%97.4%SVM937%99.5%95.7%V. CONCLUSIONIn this paper, we adopt a new improved learning

39、 method of BP algorithm based on specific features of Chinese VLPs. Color collocation and dimension are used in the preprocessing procedure, which makes location and segmentation more accurate. The Layout of the Chinese VLP is an important feature, which is used to construct a classifier for recogni

40、zing and makes the system performs well on scratch and inclined plate images. Experimental results show that the proposed method reduces the error rate and consumes less time. However, it still has a few errors when dealing with specially bad quality plates and characters similar to others. This often takes place among these characters (especially letter and number):38 4A 8B D0. In order to improve the incorrect recognizing problem we try to add template-based model 13 at the end of the neural network.REFERENCES1 P. Davies, N. Emmottand N. Ayland,“ License Plate Recognition Technology for