个人小结及英文自我评价_1.docx

《个人小结及英文自我评价_1.docx》由会员分享，可在线阅读，更多相关《个人小结及英文自我评价_1.docx（13页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、个人小结及英文自我评价仅仅由别人的评价来判定自己是不全面的，当自己也沉淀下来，窥探自己的内心，写下自己的自我评价，这样才可以不断进步。但是英文自我评价要怎么写呢?下面是我为大家带来的个人小结自我评价，信任对你会有帮助的。个人小结及英文自我评价篇一In July 20xx, I joined Baosteel Group BaGang Co., Ltd., and in the past year and a half I have been enthusiastic about my work, I have been strict with myself and my work positi

2、on. I always keep my "modest", "prudent" The attitude of leadership in the cultivation of care and the help of colleagues to support, and always diligent study, proactive, and strive to improve themselves, and always work hard and earnestly complete the task, perform good job dut

3、ies, outstanding performance in all aspects, has been the leadership and colleagues We are sure. Through their own continuous efforts, whether ideological, learning or work, have made considerable development and tremendous gains. Through this year's work and study, I realized that the growth of

4、 a qualified technician is a bright future, full of hope at the same time need to pay efforts and effort of the process, but also a need to constantly improve the continuous development of the long-term process. The following is a summary of my work in this year and self-identification:1. Strict sel

5、f-discipline, consciously strengthen party spirit, political consciousness has been improvedThought is the guide to action, a person if you want to do a good job, we must first establish their own work thinking. As a non-party member, I actively asked to join the party organization, in August 20xx t

6、urned over to join the party application, is now a party activists. In my daily work, I have strict demands on myself, consciously accepting the supervision and assistance of Party members and colleagues, persistently overcome my own shortcomings and make up for my own shortcomings.Always adhere to

7、the Marxist-Leninist position, viewpoint and methodology, adhere to the correct world outlook, outlook on life, values, and to guide their own learning, work and life practice. As a member of the company, I seriously study and penetrate the company's mainstream cultural thinking, the company'

8、;s core business philosophy, and actively promote the party spirit, And apply it to the actual work, consistent with the company.Second, thirst for knowledge, with an open mind to learnAs the 20xx session of a new employee, and only continue to upgrade their knowledge and technical level, in order t

9、o better complete their work. Work encountered problems do not understand, the humbly to the master and other colleagues for advice. Daily work in the operating area in the morning software work in the afternoon into the scene to see more equipment to see more, and constantly increase their field ex

10、perience.At the same time a serious study of the company's various documents on the management system and norms have a certain understanding of the work of the company to standardize the management of the standard to strict demands on themselves.Third, work hard, conscientiously complete the wor

11、k tasksI start from doing my own work and daily work, starting from me, from now on, I have always believed that a hard work, a harvest, so I have been working hard to continuously study and work hard. From the small things around and perseverance, love their own work to be able to take seriously ea

12、ch and every job, work, on time, effective use of working hours, stick to their posts. Equipment failure repair, no matter when they can do the first time to the field attendant operations, and put forward their own programs involved in repair, to ensure the normal operation of equipment as soon as

13、possible. In February 20xx I was employed as a field professional engineer in the area. I followed the pace of the company to strengthen the theoretical knowledge of learning, and strive to achieve a new understanding of the use of new gains, to guide the practice of theory , To promote the work, im

14、prove the level of the purpose of the work, and constantly improve their technical level to guide their work. Through the theoretical study summary in the classroom, combined with practical problems in the work, "120T converter 9.1 meters platform operating instructions" were modified, and

15、 verify the operating standards have been prepared to apply the applicable standards have been revised, and the monthly new 2 standard operating standards to improve the standardization of operations. Through the dedication in their own work, tirelessly to make achievements, I want to constantly imp

16、rove their job skills, and strive to master their job knowledge, to do their own work and the backbone of the experts, down to earth to do their jobs.Fourth, work to promote team spirit, to overcome the work of one after another problemIn the usual work, first of all do the daily work, I and other c

17、olleagues in the work area both division of labor and cooperation, insist on regular and other technical personnel exchanges, and fully carry forward the democracy, never arbitrary, and thus a more successful completion of the maintenance department The work tasks. The first quarter of 20xx in the w

18、ork area colleagues and the leadership of the strong support of the lead by me to complete the smooth completion of the "alloy material in the position of the bin material electroplating push rod flap card material solution" QC information released to solve the The Material Problem of Elec

19、tro - hydraulic Push - rod Flap Valve of the 3 - position 120 - ton Converter of 9.1m Platform Alloy. The design for the company's annual savings of about 21 million. And through this activity to enhance the cohesion between colleagues to improve the ability to participate in the program designe

20、rs to analyze issues and fully mobilize the enthusiasm of the staff, the use of existing technical strength for enterprises Taqian efficiency. In the fourth quarter of 20xx, the QC team was set up in the sub-assembly operation area to improve the alloy chute for the 120-ton converter. The QC data fo

21、r the "alloy chute increasing life plan" is scheduled to be released in mid-December.Summary of eight years of work in the steel, I work on the ideas have made great progress. Of course, the results represent the past, in the future work, I will redouble our efforts to strive to do better.

22、 Because the technology continues to progress and update, only through continuous learning, down-to-earth style, can be competent for their jobs. At the same time in the accumulation of future work experience, and gradually develop their own predictability, and constantly in the on-site inspection,

23、supervision at any time to identify problems and solve problems, so that their on-site comprehensive processing capacity continue to get exercise and improve.Liu Jian个人小结及英文自我评价篇二Through their own continuous efforts, whether ideological, learning or work, have made considerable development and treme

24、ndous gains.Through this year's work and study, I realized that the growth of a qualified technician is a bright future, full of hope at the same time need to pay efforts and effort of the process, but also a need to constantly improve the continuous development of the long-term process. The fol

25、lowing is a summary of my work in this year and self-identification:1. Strict self-discipline, consciously strengthen party spirit, political consciousness has been improvedThought is the guide to action, a person if you want to do a good job, we must first establish their own work thinking. As a no

26、n-party member, I actively asked to join the party organization, in August 20xx turned over to join the party application, is now a party activists. In my daily work, I have strict demands on myself, consciously accepting the supervision and assistance of Party members and colleagues, persistently o

27、vercome my own shortcomings and make up for my own shortcomings.Always adhere to the Marxist-Leninist position, viewpoint and methodology, adhere to the correct world outlook, outlook on life, values, and to guide their own learning, work and life practice. As a member of the company, I seriously st

28、udy and penetrate the company's mainstream cultural thinking, the company's core business philosophy, and actively promote the party spirit, And apply it to the actual work, consistent with the company.Second, thirst for knowledge, with an open mind to learnAs the 20xx session of a new emplo

29、yee, and only continue to upgrade their knowledge and technical level, in order to better complete their work. Work encountered problems do not understand, the humbly to the master and other colleagues for advice. Daily work in the operating area in the morning software work in the afternoon into th

30、e scene to see more equipment to see more, and constantly increase their field experience.At the same time a serious study of the company's various documents on the management system and norms have a certain understanding of the work of the company to standardize the management of the standard t

31、o strict demands on themselves.Third, hard work, conscientiously complete the work tasks I do a good job from their own work and daily work, start from me, from now on, I have always believed that a hard, a harvest, so I have been working, constantly Efforts to learn, and constantly work hard. From

32、the small things around and perseverance, love their own work to be able to take seriously each and every job, work, on time, effective use of working hours, stick to their posts. Equipment failure repair, no matter when they can do the first time to the field attendant operations, and put forward t

33、heir own programs involved in repair, to ensure the normal operation of equipment as soon as possible. In February 20xx I was employed as a field professional engineer in the area. I followed the pace of the company to strengthen the theoretical knowledge of learning, and strive to achieve a new und

34、erstanding of the use of new gains, to guide the practice of theory , To promote the work, improve the level of the purpose of the work, and constantly improve their technical level to guide their work. Through the dedication in their own work, tirelessly to make achievements, I want to constantly i

35、mprove their job skills, and strive to master their job knowledge, to do their own work and the backbone of the experts, down to earth to do their jobs.Fourth, work to promote team spirit, to overcome the work of one after another problemIn the usual work, first of all do the daily work, I and other

36、 colleagues in the work area both division of labor and cooperation, insist on regular and other technical personnel exchanges, and fully carry forward the democracy, never arbitrary, and thus a more successful completion of the maintenance department The work tasks. Have made great progress. Of cou

37、rse, the results represent the past, in the future work, I will redouble our efforts to strive to do better. Because the technology continues to progress and update, only through continuous learning, down-to-earth style, can be competent for their jobs. At the same time in the accumulation of future

38、 work experience, and gradually develop their own predictability, and constantly in the on-site inspection, supervision at any time to identify problems and solve problems, so that their on-site comprehensiv个人小结及英文自我评价篇三In the past five months, under the leadership of the Department of Engineering S

39、ervices, and colleagues through the common struggle, after their own positive efforts to do the following work.one. Work attitude, ideological work.I am very passionate about my job, I am able to follow the disciplines of the Engineering Department, maintain a responsible work attitude, humble learn

40、ing, proactive, and constantly improve their technical level, and strive to lead the allocation of each task to do the most it is good.two. Guide the installation work.In Jinli permanent magnet installation combat work, through the equipment of the pipeline interface, rectifier cabinets and control

41、cabinet wiring to pay-line installation, deepened my understanding of the equipment process and line power supply and distribution. But also trained me to understand the electrical wiring schematic, the ability to connect pipe installation drawings. But also to learn the skills of cognitive equipmen

42、t spare parts. Every step of the installation process is done carefully. Found that the installation of lye filter timely and correct installation. Although the smooth completion of the guidance, but through the work found in the control cabinet in the plc model configuration and accessories detaile

43、d name, the role of functional understanding is not deep enough. The future focus on some technical drawings, working hours to the material security department cognitive accessories. Do not understand the issue of timely advice to colleagues and leaders.Third, equipment testing and debugging work.In

44、 the workshop on the Saudi equipment test debugging, power plant cndq-10 hydrogen production equipment boot sequence, pid parameter settings, have a certain understanding. But also on the working principle of rectification from shallow to deep understanding. Before the test to determine through-cyli

45、nder is 90 degrees, tee 180 degrees. Through ball valve modulation off. Jordan's pneumatic film regulating valve should do its initial adjustment, debugging process, such as equipment can not reach the system pressure, the actual level does not match with the host computer, pump damage has occur

46、red, should be based on the actual situation of correct investigation.Fourth, the future direction of work.Next month focused on the debugging phase of learning. Develop their own ability to find fault. The scene found the problem back to the leadership, more advice. In the future work to make up for deficiencies, work hard to do better.