信息获取技术和材料优秀PPT.ppt

《信息获取技术和材料优秀PPT.ppt》由会员分享，可在线阅读，更多相关《信息获取技术和材料优秀PPT.ppt（18页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、信息获取技术和材料第1页，本讲稿共18页光电探测器光电探测器按光电转换方式，光电探测器可分为按光电转换方式，光电探测器可分为:光电导型、光生伏打型（势垒型）和热电偶型。光电导型、光生伏打型（势垒型）和热电偶型。光电转换中根据探测的光子波长分为光电转换中根据探测的光子波长分为:狭能隙半导体材料（红外）和宽能隙半导体材料（可见狭能隙半导体材料（红外）和宽能隙半导体材料（可见和紫外）。和紫外）。宽能隙材料以宽能隙材料以Si、Ge、和、和GaN、AlN等为主，等为主，狭能隙半导体材料主要为铅盐、碲镉汞、狭能隙半导体材料主要为铅盐、碲镉汞、SbIn等。等。第2页，本讲稿共18页近期光电探测器最大的进展在

2、两个方面：近期光电探测器最大的进展在两个方面：(1)用超晶格（量子阱）结构提高了量子效率、相应时间和集用超晶格（量子阱）结构提高了量子效率、相应时间和集成度；成度；（2）制成了探测器阵，可以用作成像探测。）制成了探测器阵，可以用作成像探测。两者结合后最典型的例子为可以制成探测灵敏度极高的两者结合后最典型的例子为可以制成探测灵敏度极高的HgCdTe红外焦平面列阵（红外焦平面列阵（FPA），并成功地应用于红），并成功地应用于红外遥感、成像等。外遥感、成像等。第3页，本讲稿共18页Photodetector:convert light into electricity through the pho

3、toelctric effectRequirements:high sensitivity,fast response,low noise,low cost,and high reliability第4页，本讲稿共18页R is the responsivity of the photodetector(A/W)第5页，本讲稿共18页the bandwidth of a photodetector is determined by the speed with which it responds to variations in the incident optical power.The r

4、ise time Tr is defined as the time over which the current builds up from 10%to 90%of its final value when the incident optical power is changed abruptly.tr is the transit time and RC is the time constant of the equivalent RC circuit.第6页，本讲稿共18页The transit time is added to RC because it takes some ti

5、me before the carriers are collected after their generation through absorption of photons.The maximum collected time is just equal to the time an electron takes to traverse the absorption region.There is a trade-off between the bandwidth and the responsivity(speed versus sensitivity)of photodetector

6、.Often,the RC time constant RC limits the bandwidth because of electrical parasitics.第7页，本讲稿共18页These high-speed photodetectors show flat response in both amplitude and phase up to 25 GHz and are optimized for frequency-domain applications.The high-sensitivity Model 1414 near-IR photodetectors use 2

7、5-m-diameter back-illuminated InGaAs Schottky photodiodes with peak responsivities of 0.6 A/W at 1300 nm.The active layer is twice as thick as in our ultrahigh-speed Model 101X module,producing a 50%greater responsivity between 950 nm and 1650 nm.The conversion gain with a 50-W load is 15 V/W.25-GHz

8、 Near-IR Photodetector 第8页，本讲稿共18页第9页，本讲稿共18页U2t XPDV2020R-VF-FP photodetector第10页，本讲稿共18页第11页，本讲稿共18页第12页，本讲稿共18页第13页，本讲稿共18页Ultra-high speed optical pulse waveform measurement is Achieved by using the sub-picosecond optical pulse generation technology with a passively mode-locked fiber laser and the nonlinear optical technology with the sum-frequency(SF)light generation.第14页，本讲稿共18页第15页，本讲稿共18页第16页，本讲稿共18页第17页，本讲稿共18页第18页，本讲稿共18页