安全员考试实习题（Safetyofficerstestpracticequestions）.docx

《安全员考试实习题（Safetyofficerstestpracticequestions）.docx》由会员分享，可在线阅读，更多相关《安全员考试实习题（Safetyofficerstestpracticequestions）.docx（26页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、安全员考试实习题(Safety officers test practice questions)1. Judgment (20 points, 1 point, 20 points)1. The general contracting enterprise shall implement the “second floor separation of management and operation layer as soon as possible, and rapidly improve the management level, so as to professionalize the

2、 construction work and the enterprise of labor services.On the wrongYour answer: no correct answer: yes2. construction project bidding, it shall, in accordance with relevant provisions of the bidding documents evaluation standards and procedures to evaluate tender comparison, in appropriately qualif

3、ied bidders, the winner is selected according to the principle of lowest.On the wrongYour answer: no correct answer: no3. Large construction companies or complex construction projects may be jointly contracted by two or more contracting units, and the parties to the contract shall be jointly and sev

4、erally liable for the performance of the contract.On the wrongThe higher the ignition point of matter, the higher the likelihood of danger.On the wrongYour answer: no correct answer: no5. The state shall implement an improved system for the production safety of serious violations. The production and

5、 business operation entities shall not use the technology or equipment of the crisis production safety which is obsolete or prohibited by the state order.On the wrongYour answer: no correct answer: no6. Acetylene is strictly prohibited when stored or used.On the wrongYour answer: no correct answer:

6、yes7. is subject to supervision of construction projects, the construction unit cannot entrust has the corresponding qualification level engineering supervision and supervision and construction contractors are no subordinate relations or other interest of the project design units for supervision.On

7、the wrongYour answer: no correct answer: no8. The representative of the general supervision engineer shall be responsible for the examination of the design or special construction plan of the construction organization, and shall be responsible for the signature of the representative of the director.

8、On the wrongYour answer: no correct answer: noThe safety production license shall be uniform in style by the department of production supervision and administration of the people* s government of the province, autonomous region or municipality directly under the central government.On the wrongYour a

9、nswer: no correct answer: no10. The construction administrative department or other relevant departments shall not entrust the supervision and inspection of the construction site to the concrete implementation of the construction work safety supervision agency.On the wrong11. the design unit shall c

10、onstruction safety operation and protection needs, to design key parts of construction safety and link in the design file, but can not prevent any production safety accident guidance is put forward.On the wrongYour answer: no correct answer: no12. Welding copper, aluminum, zinc, tin, lead and other

11、non-ferrous metals, like welding ordinary steel, welder shall adopt the same safety measures.On the wrongYour answer: no correct answer: yesThe main responsible persons of the production and business operation entities shall be fully responsible for the work safety of the unit, and other responsible

12、 persons shall be responsible for the work safety in their respective functions and responsibilities.On the wrongYour answer: no correct answer: yes14. In the construction site, safety is not to cause casualties and occupational-disease of the staff, not to damage the equipment and property.On the w

13、rongYour answer: no correct answer: yes15. not the general accident caused casualties, peoples government at the county level may also entrust unit organization accident investigation, the accident may also be authorized or entrusted departments organize the accident investigation team to investigat

14、e.On the wrongYour answer: no correct answer: yes16. In order to standardize the construction of safe production and ensure the health of employees, the construction area and the living area should be clearly divided, and the corresponding responsibility system shall be established and the responsib

15、ility shall be carried out to the people.On the wrongYour answer: no correct answer: yes17. The representative of the enterprise legal person is the first person responsible for the safe production, and the enterprise legal representative and the project manager must be certified by the occupational

16、 safety and health administration to carry out the certificates.On the wrongYour answer: no correct answer: no18. Effective safety management should be based on the understanding of risk and how to control risk.On the wrongYour answer: no correct answer: yesThe isolation switch of the distribution b

17、ox and the switch box can be used as a normal circuit breaker with a circuit breaker with visible breakpoints.On the wrongYour answer: no correct answer: noThe cable line that requires three-phase four-wire distribution must be used with five core cables.On the wrongYour answer: no correct answer: y

18、es2. Single topic selection (20 points, 1 point, 20 points)1. Triple safe education means () this level 3.A, legal representative of the enterprise, project leader andteam leader.B, company, project, teamC, total package unit, subcontractor, companyD, construction unit, construction unit, supervisio

19、n unitYour answer: no answer: B2, according to the construction hoisting machinery safety supervision and management regulations ”, after the completion of the construction hoisting machinery installation and rental () shall organize acceptance, installation, supervision and other relevant units, wi

20、th appropriate level of qualification or entrust the inspection acceptance testing institutions.A. Construction unitB. Use unitsC. Installation unitD. competent departmentYour answer: no answer: B3, Special operation certificate, each () annual review.A, 1 yearB, one and a half yearsC, 2 yearsD, 3 y

21、ears,Your answer: no answer: C4, regulations on the report and the investigation and handling of production safety accident, the accident unit principal responsible person not safe production management responsibilities in accordance with the cause of the accident, happened (), year income fines of

22、40%;Those who belong to the state staff and shall be punished according to law; If a crime is constituted, criminal responsibility shall be investigated in accordance with the law.A. general accidentsB. Bigger accidentsC. major accidentsD. Special major accidentsYour answer: no answer: B5. The highe

23、st proportion of construction accidents is ().A high fall accidentB. all kinds of collapse accidentsC. Objects strike accidentsD. Crane injury accidentYour answer: no answer: A6. The supporting installation must be constructed in the order of ().A, dig and support firstB, grooved support and then di

24、gC, edge excavation supportD, dig to the bottom of the trough to supportYour answer: no answer: B7. When there is no special requirement in the surrounding environment of the foundation pit, the excavation depth of the foundation pit is less than () to the secondary foundation pit.A, greater than 5m

25、 is less than 8mB, larger than 7m is less than 10mC, greater than 8m is less than 12mD, bigger than 6m is less than 9mYour answer: no answer: B8. Multiple bending causes () is one of the main causes of wire rope damage.A, tensileB, reverseC, Bending fatigueD, deformationYour answer: no answer: C9. T

26、he lifting operation of the tower machine must be balanced with the balance arm.A, coordination armB, boomC, weightD, the carYour answer: no answer: B10. When the attachment frame and the attachment rod are installed, the distance of the attached rod should be adjusted to ensure ().A.Stability ofthe

27、 balance armB.Stability of theheavy armC.Stability of the towerD. Vertical degrees of the towerYour answer: no answer: D11. A pair of scaffolding, with a height of 48m; Step distance h = 1. 5m, span La = 1. 8m, this scaffolding shall be arranged in addition to the calculation requirement, the maximu

28、m vertical spacing and maximum horizontal spacing should not be greater than ().A, vertical 6m, horizontal to 6mB, vertical 5m, level 5. 4 mC, vertical 4. 5 m, level 5. 4 mD, vertical to 4. 5 m, horizontal to 6mThe boiler structure is composed mainly of (), water cooled tube, collecting box, convect

29、ion tube bundle, fireworks tube and other compression parts and other components.A, steel shellB, conduitC, drumD, Fire hoseYour answer: no answer: CThe following statement on the basic characteristics of legal responsibility () is false.A. qualitative analysisB. The size of legal liability is comme

30、nsurate with the extent of the violationC. The object of legal relation is illegalD. Legal responsibility shall be determined by specialized state organs or departmentsYour answer: no answer: CThe contracting units and contractors of construction projects shall conclude () contracts in accordance wi

31、th the law toclarify the rights and obligations of the parties.A, oralB, oral or writtenC, writtenD, Other formsYour answer: no answer: CThe production efficiency of vibratory roller is equivalent to that of static roller.A, 1, 2B, 3, 4C, 5 - 6D, 7-8Your answer: no answer: BThe attachment frame shou

32、ld be set as far as possible ().A, between the two standard sections of the towerB, The connection between the heavy arm and the towerC, Node joint of standard node of tower bodyD, balance arm and the connection of the tower bodyYour answer: no answer: C17. The safety technical specification of the

33、derrick and gantry material hoisting machine is stipulated that the rated load weight of the material hoist is ().A, over 3000kgB, below 1500kgC, 2000kg belowD, 2000kg aboveYour answer: no answer: C18. The internal force and deflection of the longitudinal horizontal bar (large horizontal bar) are pr

34、essed ().A, the single - span beam calculation of both endsB, two span continuous beam calculationC, three span continuous beam calculationD, can be based on single span beam and three span continuous beam calculationYour answer: no answer: C19. the dense mesh type safety net for every 10 cm x 10 cm

35、 =100 cm 2 area more than how many mesh? (a)2000 A,B, 1500C, 3000D, 40000Your answer: no answer: A20. Safety helmet impact test, how much force should be passed on the head mould? (a)A, 400 kgB, 500 kgC, 600 kgD, 700 kgYour answer: no answer: B3. Multiple choice questions (15 questions, 2 points per

36、 question, 30 points, 2 or more correct answers for each question, no more answers, no scores)1. The items that should be inspected periodically in the use of the fastener steel pipe are ().A, the foundation is stagnant, the base is loose, and the upright rod is suspendedB, the bolt is looseC, verti

37、cal deflection and vertical deflectionD, The safety protection is in good conditionE, the pole is covered with concreteYour answer: no answer: ABCD2. Construction lift is mainly composed of ().A. metal structureB. Drive mechanismC. attachedD. Safety protection deviceE. electrical control systemYour

38、answer: no answer: ABDE3. The construction requirements at the bottom of the scaffold are ().A. base or gasket shall be set at the bottom of each pole, and vertical and horizontal sweep shall be setB. The longitudinal sweep rod is no more than 200mm from the base epithelium, and it adopts the right

39、Angle fastener and the upright rod to be fixedC. The longitudinal sweep rod is not greater than 1000mm from the base epithelium, and the Angle fastener is fixed with the upright rodD. The horizontal sweep rod should be fastened to the upright position under the vertical sweep rod by using right-angl

40、e fastenerE. The horizontal sweep rod is located at 0 and 8m on the bottom surfaceYour answer: no answer: ABD4. Which of the following provisions regarding border guard railings are correct? (a)A, the protective railings shall consist of the upper, the next two crossbars and the balustradesB, The he

41、ight of upper rod is 1. 51. 8mThe height of the lower rod is 0. 50.6 mD, upper bar height is 1. 0 1. 2 mE, the lower bar height is 0. b 0. 8 mYour answer: no answer: ACDS, What are the main parts of the safety net? (a)A, the net bodyB, the ropeC, lashingD, steel ropeE, meshYour answer: no answer: AB

42、CD6, the general rating of the leakage current action of the electric leakage protector in the distribution box I T and rated leakage action time, can choose to (), respectively.A, I A = 50 ma, T A = 0. 2 sB, I A = 75 ma, T A = 0.2 sC, I100ma,T0.2 sD, IA=200ma,TA=0.15 sE, IA=500ma,TA=0.1 sYour answe

43、r: no answer: ABCD7. In the following occupational diseases, occupational diseases related to the construction industry are ().A, anthraxB, forest brain diseaseC, arm vibrationD, Low pressure diseaseE, poisoningYour answer: no answer: CE8. The basic feature of welding or cutting is ().A, high temper

44、atureB, high pressureC, flammableD, explosiveE, easy to burnYour answer: no answer: ABCD9. Cylinder is used to prevent pouring of the device ().A, stem, discB, one-way valveC, press nutD, check valveE, buffer tankYour answer: no answer: BDE10. The equipment should be protected against wind and light

45、ning.A, tower craneB, construction liftC, Derrick material hoistD, scaffoldingE, construction work surfaceYour answer: no answer: ABCD11. The enterprise shall have the safety production license and shall have the safe production conditions.A. establish and improve the safe production responsibility

46、system, formulate complete safety production rules and regulations and operating proceduresB. the main responsible person and the safety production management personnel are assessed qualifiedC. Safety input meets safety production requirementsD. Set up the safe production management organization and

47、 provide full-time safety production management personnelE. Employees are qualified to produce education and training safelyYour answer: no answer: ABCDE12. according to the construction hoisting machinery safety supervision and management regulations, rental units before the construction hoisting m

48、achinery rental for the first time, since the purchase and the use of the construction hoisting machinery unit first before installation in constructionhoisting machinery, shall take construction hoisting machinery () to this unit for industry and commerce registered local construction administrative department of the