金属材料专业英语简单介绍.ppt
《金属材料专业英语简单介绍.ppt》由会员分享,可在线阅读,更多相关《金属材料专业英语简单介绍.ppt(46页珍藏版)》请在淘文阁 - 分享文档赚钱的网站上搜索。
1、Unit 6An Introduction to Metallic Materials1We should graspWhat is a metal?What is an alloy?What are the differences between their properities?Explain solid solution and intermetallic compound.2New Words&Expressions from Part1roamrumgraphitegrfaitmalleablemliblductiledktailsolublesljublchromiumkrumj
2、mtransitiontrnzin shellelv.漫游,闲逛,徜徉漫游,闲逛,徜徉;n.漫步,漫游,徘徊漫步,漫游,徘徊n.石墨石墨a.有伸延性的,可锻的有伸延性的,可锻的a.易延展的,柔软的易延展的,柔软的 a.可溶解的,可溶的可溶解的,可溶的 n.铬铬n.转换,跃迁,过渡转换,跃迁,过渡n.壳,外壳壳,外壳3Translation InThe outmost layer of electrons 最外层电子最外层电子nFree election gas 自由电子气自由电子气 nElectrical conductivity 电导率,电导性电导率,电导性nPlain-carbon ste
3、el 普通碳素钢普通碳素钢 nSolid solution 固溶体,固溶液,固体溶液固溶体,固溶液,固体溶液4Translation IInIntermetallic compound 金属互化物金属互化物nMetallic material 金属材料金属材料 nStrainless steel 不锈钢不锈钢nSolute 溶质溶质 nSolvent 溶剂溶剂nPeriodic table 元素周期表元素周期表nElectronegativity 电负性电负性nTransition metal 过渡金属过渡金属 nCrystal structure 晶体结构晶体结构5What is a Met
4、al?Q:What is a Metal?A:Metal is consisted of positive centers(or ions)sitting in a“gas”of free-electros.It tends to be good electrical conductors.6What is an Alloy?Consist of a mixture of a pure and one or more other elements.由两种或两种以上的由两种或两种以上的金属金属或金属与或金属与非金属非金属经一定方法所合成的具有金属特性的物质。经一定方法所合成的具有金属特性的物质。
5、7Its some properties:less malleable and ductile than pure metals and tend to have lower to melting points.合金的一些性质:延展性较差,低熔点。合金的一些性质:延展性较差,低熔点。8Something else.1、合金根据组成、合金根据组成元素元素的数目,可分为二元的数目,可分为二元合金、合金、三元合金三元合金和和多元合金多元合金。2、根据结构的不同,合金主要类型是:、根据结构的不同,合金主要类型是:(1)混合物合金:当液态合金凝固时,构成混合物合金:当液态合金凝固时,构成合金的各合金的各
6、组分组分分别分别结晶结晶而成的合金,如而成的合金,如焊锡焊锡;(2)固熔体合金当液态合金凝固时形成固熔体合金当液态合金凝固时形成固溶固溶体体的合金,如的合金,如金银合金金银合金;(3)金属互化物合金:各组分相互形成金属互化物合金:各组分相互形成化合化合物物的合金,如的合金,如铜铜、锌锌组成的组成的黄铜黄铜。93、合金的一些性质:、合金的一些性质:(1)多数合金多数合金熔点熔点低于其组分中任一种组成低于其组分中任一种组成金属的熔点;金属的熔点;(2)硬度硬度比其组分中任一金属的硬度大;比其组分中任一金属的硬度大;(3)合金的合金的导电性导电性和和导热性导热性低于任一组分金低于任一组分金属。利用合
7、金的这一特性,可以制造高电属。利用合金的这一特性,可以制造高电阻和高热阻材料。还可制造有特殊性能的阻和高热阻材料。还可制造有特殊性能的材料材料。(4)有的抗腐蚀能力强有的抗腐蚀能力强(如不锈钢如不锈钢)4、常见合金:球墨铸铁、锰钢、不锈钢、常见合金:球墨铸铁、锰钢、不锈钢、黄铜、青铜、白铜、焊锡、硬铝、黄铜、青铜、白铜、焊锡、硬铝、18K黄黄金、金、18K白金。白金。10What is an Alloy?Q:What is an Alloy?A:An alloy consists of a mixture of a pure metal and one or more other elemen
8、ts which can be metals or non-metal.Q:What are the differences between their properties?A:Alloys are usually less malleable and ductile than pure metals and the tend to have lower melting points.11Think about.Give examples to explain soild solution and intermetallic compound?12Solid SolutionsIn many
9、 cases,metals are quite soluble in other metals.For example,solid copper and soild nickel are fully soluble in each other.This type of perfect soild solubility is a side effect of having free electrons.Since the electrons are free to move,the exact number of valence electrons possessed by any given
10、atom shouldnt matter.13So a“solid-solution”is that one metal serves as the solvent and the other as the other as the solute,althought in a case like copper and nickel where these are mutually soluble at all compositions the terms solvent and solute can be a little misleading.14For example,the figure
11、 in the right is Au-Ag phase diagram,below fusiform area is solid solutions,15Intermetallic CompoundsNot all metals are soluble in other metals,thus,produced another new phase called“intermetallic compounds”,such as nickel will dissolve some aluminum,so that at low aluminum contents a solid solution
12、 is produced.But if larger amounts of aluminum are added,then produce intermetallic compounds.16Some of these compounds have a very well defined composition,such as Ni3AlOthers have quite a wide range of composition,such as NiAl17Three types of circumstances of intermetallic compounds formingThe fir
13、st circumstance:size differenence The second circumstance:a large differenence in electronegativity The third circumstance:certain ratios of the number of valence electrons to the number of atoms in a structure18Hume-Rothery RuleHume-Rothery Rule 1:Atomic Size Factor(the 15%)Rule.Extensive substitut
14、ional solid solution occurs only if the relative difference between the atomic diameters(radii)of the two species is less than 15%.If the difference 15%,the solubility is limited.Comparing the atomic radii of solids that form solid solutions,theempirical rule given by Hume-Rothery is given as:Mismat
15、ch=19nHume-Rothery Rule 2:Crystal Structure Rule:For appreciable solid solubility,the crystal structures of the two elements must be identical.Hume-Rothery Rule 3:Valency Rule:A metal will dissolve a metal of higher valency to a greater extent than one of lower valency.The solute and solvent atoms s
16、hould typically have the same valence in order to achieve maximum solubility.Hume-Rothery Rule 4:The Electronegativity Rule:Electronegativity difference close to 0 gives maximum solubility.The more electropositive one element and the more electronegative the other,the greater is the likelihood that
17、they will form an intermetallic compound instead of a substitutional solid solution.The solute and the solvent should lie relatively close in the electrochemical series.20休姆罗瑟里(休姆罗瑟里(HumeRothery)规律)规律(1)形成合金的元素原子半径之差超过形成合金的元素原子半径之差超过1415,则,则固溶度极为有限;若尺寸差小于固溶度极为有限;若尺寸差小于15,尺寸因素成为次尺寸因素成为次要的影响因素,固溶度由其他影
18、响因素确定,这就是知要的影响因素,固溶度由其他影响因素确定,这就是知名的名的15规律。规律。(2)如果合金组元的负电性相差很大,固溶度就极小;如果合金组元的负电性相差很大,固溶度就极小;(3)两元素的固溶度与它们的原子价有关,高价元素在两元素的固溶度与它们的原子价有关,高价元素在低价元素中的固溶度大于低价元素在高价元素中的固溶低价元素中的固溶度大于低价元素在高价元素中的固溶度;度;(4)BB族溶质元素在族溶质元素在B族溶剂元素中的固溶度族溶剂元素中的固溶度都相同都相同(e/a=1.36),与具体的元素种类无关;,与具体的元素种类无关;(5)两组元只有具有相同的晶体结构才能形成无限两组元只有具有
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 金属材料 专业 英语 简单 介绍
限制150内