诺基亚N86 拆机 装机 图解 pdf.pdf

《诺基亚N86 拆机 装机 图解 pdf.pdf》由会员分享，可在线阅读，更多相关《诺基亚N86 拆机 装机 图解 pdf.pdf（20页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、 Nokia N86 8MPRM-484/RM-485/RM-486Service Manual Level 1&2 1 Confidential Copyright 2009 NOKIA All rights reserved Version 1.0 ISSUE 1 SERVICE MANUAL Level 1&2 RM-484/RM-485/RM-486 Transceiver characteristics Transceiver characteristics Band:Band:RM-484:WCDMA 900/1900/2100+WLAN+GSM/GPRS/EGPRS GSM 85

2、0/900/1800/1900 MHz RM-485:WCDMA 850/1900/2100+WLAN+GSM/GPRS/EGPRS GSM 850/900/1800/1900 MHz RM-486:GSM/GPRS/EGPRS 850/900/1800/1900 MHz Display:Display:2.6 QVGA 320 x240 AM OLED,16 M colours Keypad:Keypad:Alphanumeric keypad and Multimedia keypad Camera:Camera:8 MP AF Carl Zeiss,Dual LED Flash with

3、 Heptagon micro-optics lens,secondary camera CIF Operating System:Operating System:S60 3rd edition,feature pack 3(PPD 53.32 R3)Connections:Connections:2 mm charger,3,5 mm AV connector,Bluetooth 2.0 EDR,Micro USB 2,0,A-GPS,WLAN 802.11b/g,TV out Transceiver with BL-5K battery pack Talk time Standby No

4、te Talk time Standby Note GSM:GSM:Up to 6.3 hours WCDMAWCDMA:Up to 3.9 hours GSM:GSM:Up to 315 hours WCDMA:WCDMA:Up to 275 hours Talk times are dependant on network parameters and phone settings Nokia N86 8MPRM-484/RM-485/RM-486Service Manual Level 1&2 2 Confidential Copyright 2009 NOKIA All rights

5、reserved Version 1.0 ISSUE 1 Table of contents Table of contents 1.Change history.3 2.Copyright.43.Warnings and cautions.53.1Warnings.53.2Cautions.54.ESD protection.65.Care and maintenance.76.Battery information.87.Exploded view.98.Service devices.109.SW-update.1110.Disassembly instruction.1211.Asse

6、mbly hints.1912.Solder components.20 Nokia N86 8MPRM-484/RM-485/RM-486Service Manual Level 1&2 3 Confidential Copyright 2009 NOKIA All rights reserved Version 1.0 ISSUE 1 1.1.CHANGE HISTORY Status Version No.Date Comments CHANGE HISTORY Status Version No.Date Comments Approved 1.0 22.04.2009 The pur

7、pose of this document is to help NOKIA service levels 1 and 2 workshop technicians to carry out service to NOKIA products.This Service Manual is to be used only by authorized NOKIA service suppliers,and the content of it is confidential.Please note that NOKIA provides also other guidance documents(e

8、.g.Service Bulletins)for service suppliers,follow these regularly and comply with the given instructions.While every endeavor has been made to ensure the accuracy of this document,some errors may exist.If you find any errors or if you have further suggestions,please notify NOKIA using the address be

9、low:CMO Operation&Logistics Training and Vendor Development Multimedia Creation&Support CMO Operation&Logistics Training and Vendor Development Multimedia Creation&Support mailto:Service.M Please keep in mind also that this documentation is continuously being updated and modified,so watch always out

10、 for the newest version.Nokia N86 8MPRM-484/RM-485/RM-486Service Manual Level 1&2 4 Confidential Copyright 2009 NOKIA All rights reserved Version 1.0 ISSUE 1 2.2.COPYRIGHT COPYRIGHT Copyright 2009 Nokia.All rights reserved.Reproduction,transfer,distribution or storage of part or all of the contents

11、in this document in any form without the prior written permission of Nokia is prohibited.Nokia,Nokia Connecting People,and Nokia X and Y are trademarks or registered trademarks of Nokia Corporation.Other product and company names mentioned herein may be trademarks or tradenames of their respective o

12、wners.Nokia operates a policy of continuous development.Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.Under no circumstances shall Nokia be responsible for any loss of data or income or any special,incidental,conseque

13、ntial or indirect damages howsoever caused.The contents of this document are provided“as is”.Except as required by applicable law,no warranties of any kind,either express or implied,including,but not limited to,the implied warranties of merchantability and fitness for a particular purpose,are made i

14、n relation to the accuracy,reliability or contents of this document.Nokia reserves the right to revise this document or withdraw it at any time without prior notice.The availability of particular products may vary by region.IMPORTANT IMPORTANT This document is intended for use by qualified service p

15、ersonnel only.Nokia N86 8MPRM-484/RM-485/RM-486Service Manual Level 1&2 5 Confidential Copyright 2009 NOKIA All rights reserved Version 1.0 ISSUE 1 3.3.WARNINGS AND CAUTIONS WARNINGS AND CAUTIONS Please refer to the phones user guide for instructions relating to operation,care and maintenance includ

16、ing important safety information.Note also the following:3.13.1 Warnings Warnings 1.CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINE MANAGEMENT SYSTEMS AND ANTISKID BRAKING SYSTEMS.UNDER CERTAIN FAULT CONDITIONS,EMITTED RF ENERGY CAN AFFECT THEIR OPERATION.IF NECESSARY,CO

17、NSULT THE VEHICLE DEALER/MANUFACTURER TO DETERMINE THE IMMUNITY OF VEHICLE ELECTRONIC SYSTEMS TO RF ENERGY.2.THE HANDPORTABLE TELEPHONE MUST NOT BE OPERATED IN AREAS LIKELY TO CONTAIN POTENTIALLY EXPLOSIVE ATMOSPHERES,EG PETROL STATIONS(SERVICE STATIONS),BLASTING AREAS ETC.3.OPERATION OF ANY RADIO T

18、RANSMITTING EQUIPMENT,INCLUDING CELLULAR TELEPHONES,MAY INTERFERE WITH THE FUNCTIONALITY OF INADEQUATELY PROTECTED MEDICAL DEVICES.CONSULT A PHYSICIAN OR THE MANUFACTURER OF THE MEDICAL DEVICE IF YOU HAVE ANY QUESTIONS.OTHER ELECTRONIC EQUIPMENT MAY ALSO BE SUBJECT TO INTERFERENCE.3.23.2 Cautions Ca

19、utions 1.Servicing and alignment must be undertaken by qualified personnel only.2.Ensure all work is carried out at an antistatic workstation and that an antistatic wrist strap is worn.3.Use only approved components as specified in the parts list.4.Ensure all components,modules screws and insulators

20、 are correctly refitted after servicing and alignment.5.Ensure all cables and wires are repositioned correctly Nokia N86 8MPRM-484/RM-485/RM-486Service Manual Level 1&2 6 Confidential Copyright 2009 NOKIA All rights reserved Version 1.0 ISSUE 1 4.4.ESD PROTECTION ESD PROTECTION Nokia requires that s

21、ervice points have sufficient ESD protection(against static electricity)when servicing the phone.Any product of which the covers are removed must be handled with ESD protection.The SIM card can be replaced without ESD protection if the product is otherwise ready for use.To replace the covers ESD pro

22、tection must be applied.All electronic parts of the product are susceptible to ESD.Resistors,too,can be damaged by static electricity discharge.All ESD sensitive parts must be packed in metallized protective bags during shipping and handling outside any ESD Protected Area(EPA).Every repair action in

23、volving opening the product or handling the product components must be done under ESD protection.ESD protected spare part packages MUST NOT be opened/closed out of an ESD Protected Area.For more information and local requirements about ESD protection and ESD Protected Area,contact your local Nokia A

24、fter Market Services representative.Nokia N86 8MPRM-484/RM-485/RM-486Service Manual Level 1&2 7 Confidential Copyright 2009 NOKIA All rights reserved Version 1.0 ISSUE 1 5.5.CARE AND MAINTENANCE CARE AND MAINTENANCE This product is of superior design and craftsmanship and should be treated with care

25、.The suggestions below will help you to fulfil any warranty obligations and to enjoy this product for many years.Keep the phone and all its parts and accessories out of the reach of small children.Keep the phone dry.Precipitation,humidity and all types of liquids or moisture can contain minerals tha

26、t will corrode electronic circuits.Do not use or store the phone in dusty,dirty areas.Its moving parts can be damaged.Do not store the phone in hot areas.High temperatures can shorten the life of electronic devices,damage batteries,and warp or melt certain plastics.Do not store the phone in cold are

27、as.When it warms up(to its normal temperature),moisture can form inside,which may damage electronic circuit boards.Do not drop,knock or shake the phone.Rough handling can break internal circuit boards.Do not use harsh chemicals,cleaning solvents,or strong detergents to clean the phone.Do not paint t

28、he phone.Paint can clog the moving parts and prevent proper operation.Use only the supplied or an approved replacement antenna.Unauthorised antennas,modifications or attachments could damage the phone and may violate regulations governing radio devices.All of the above suggestions apply equally to t

29、he product,battery,charger or any accessory.Nokia N86 8MPRM-484/RM-485/RM-486Service Manual Level 1&2 8 Confidential Copyright 2009 NOKIA All rights reserved Version 1.0 ISSUE 1 6.6.BATTERY INFORMATION BATTERY INFORMATION Note:A new batterys full performance is achieved only after two or three compl

30、ete charge and discharge cycles!The battery can be charged and discharged hundreds of times but it will eventually wear out.When the operating time(talk-time and standby time)is noticeably shorter than normal,it is time to buy a new battery.Use only batteries approved by the phone manufacturer and r

31、echarge the battery only with the chargers approved by the manufacturer.Unplug the charger when not in use.Do not leave the battery connected to a charger for longer than a week,since overcharging may shorten its lifetime.If left unused a fully charged battery will discharge itself over time Tempera

32、ture extremes can affect the ability of your battery to charge.For good operation times with Ni-Cd/NiMh batteries,discharge the battery from time to time by leaving the product switched on until it turns itself off(or by using the battery discharge facility of any approved accessory available for th

33、e product).Do not attempt to discharge the battery by any other means Use the battery only for its intended purpose.Never use any charger or battery which is damaged.Do not short-circuit the battery.Accidental short-circuiting can occur when a metallic object(coin,clip or pen)causes direct connectio

34、n of the+and-terminals of the battery(metal strips on the battery)for example when you carry a spare battery in your pocket or purse.Shortcircuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places,such as in a closed car in summer or winter con

35、ditions,will reduce the capacity and lifetime of the battery.Always try to keep the battery between 15C and 25C(59F and 77F).A phone with a hot or cold battery may temporarily not work,even when the battery is fully charged.Batteries performance is particularly limited in temperatures well below fre

36、ezing.Do not dispose batteries in a fire!Dispose of batteries according to local regulations(e.g.recycling).Do not dispose as household waste.Nokia N86 8MPRM-484/RM-485/RM-486Service Manual Level 1&2 9 Confidential Copyright 2009 NOKIA All rights reserved Version 1.0 ISSUE 1 7.7.EXPLODED VIEW EXPLOD

37、ED VIEW Only available asassemblyVer.1.0These parts can not bereused after removalEARPIECEI0003 DUSTNET EARPIECEI0002DISPLAY OLED AM 240 x320I0007CROSS SLOTTED SCREWI0103MM KEYMAT DOMESHEETI0203LIGHT SWAP PWBI0205CAMERA MOD CMOS 8MPI0207AV-JACKI02082SS 2ND ENGINE MODULEI0214CAMERA BEZEL ASSYI0215TES

38、T PAD COVER LABELI0216IHF SPEAKERI0210IHF ADHESIVEI0209SCREW TORX+6I0218C-COVER ASSYI0219SLIDE FPC ASSYI0101SLIDE MODULEI0102ITU-T KEYMATI0201TYPE LABELI0206IHF SPEAKERI0210IHF ADHESIVEI0209B-COVERI0211ANTENNA ASSYI0212WATERINGRESS LABELI9998CONNECTIONFLEX ASSYI0213SCREW TORX+4I0217SCREW TORX+6I0202

39、ITU-T KEYMATDOMESHEETI0202S60 FPC ASSYI0004A-COVERI0001A1=A-COVER ASSY(I0001-I0004)A3=B-COVER ASSY(I0208-I0215,I9998)A2=LIGHT SWAP CTR(ENGINE)GLOBAL(I0203-I0206)Nokia N86 8MPRM-484/RM-485/RM-486Service Manual Level 1&2 10 Confidential Copyright 2009 NOKIA All rights reserved Version 1.0 ISSUE 1 8.8.

40、SERVICE DEVICES SERVICE DEVICES FLS-5 Flash Device CA-101 Service Cable AC-10 Travel Charger BL-5K Battery SS-182 Camera Removal Tool NMP standard toolkit(v2)NMP standard toolkit(v2)For more information,refer to the Service Bulletin(SB-011)on NOKIA Online.Supplier or manufacturer contacts for tool r

41、e-order can be found in“Recommended service equipment”document on NOKIA Online.Nokia N86 8MPRM-484/RM-485/RM-486Service Manual Level 1&2 11 Confidential Copyright 2009 NOKIA All rights reserved Version 1.0 ISSUE 1 9.9.SW-UPDATE Flash concept-(Point of Sales)SW-UPDATE Flash concept-(Point of Sales)To

42、 use the FLS-5 Flash Dongle,follow the user guide inside the sales package.Please check always for the latest version of flash software,wich is available on Nokia Online.Nokia N86 8MPRM-484/RM-485/RM-486Service Manual Level 1&2 12 Confidential Copyright 2009 NOKIA All rights reserved Version 1.0 ISS

43、UE 1 10.10.DISASSEMBLY INSTRUCTION DISASSEMBLY INSTRUCTION 1)Nokia N86 8MP disassembly 1)You must use the Nokia Standard Toolkit version 2 and the SS-182 camera removal tool.3)Protect the front cover with a protective film.4)Release the BATTERY COVER and remove it.5)Turn the phone and slide it open.

44、6)Use the SS-93 to release the keymat and remove it by pulling it.Nokia N86 8MPRM-484/RM-485/RM-486Service Manual Level 1&2 13 Confidential Copyright 2009 NOKIA All rights reserved Version 1.0 ISSUE 1 7)Close the slide.8)Unscrew the four TORX+size 6 screws in the order shown.Do not use them again.9)

45、Then unscrew these two TORX+size 4 screws in the order shown.Do not use them again.10)Lift the upper block to gain access to the SLIDE FPC assy connector.11)Disconnect the SLIDE FPC assy from the engine board.Be careful to not to damage the connector or nearby components.12)Remove the upper block.No

46、kia N86 8MPRM-484/RM-485/RM-486Service Manual Level 1&2 14 Confidential Copyright 2009 NOKIA All rights reserved Version 1.0 ISSUE 1 13)Unscrew the two TORX+size 6 screws in the order shown.Do not use them again.14)Carefully lift up the LIGHT SWAP PWB to gain access to the CONNECTION FLEX ASSY.15)Ca

47、refully disconnect the CONNECTION FLEX from the PWB with the SS-93.16)The LIGHT SWAP PWB can now be removed.17)Release the ITU-T DOMESHEET and the MM DOMESHEET with the dental tool and peel them off.Do not use them again.18)Detach the first clip of the CAMERA BEZEL assembly with the sharp end of the

48、 SS-93.Nokia N86 8MPRM-484/RM-485/RM-486Service Manual Level 1&2 15 Confidential Copyright 2009 NOKIA All rights reserved Version 1.0 ISSUE 1 19)Turn the lower block and release the second clip of the CAMERA BEZEL assembly.Then remove the assembly.20)Use the sharp end of the SS-93 to release the 2SS

49、 2ND ENGINE MODULE from B-COVER ASSY.21)Be careful not to damage the CONNECTION FLEX,while removing the 2nd engine module.22)Use the dental tool to release the IHF speaker.The IHF adhesive cannot be reused.23)Use the dental tool to release the second IHF speaker.The IHF adhesive cannot be reused.24)

50、Push out the AV connector with the AV plug and remove the connector with the tweezers.Nokia N86 8MPRM-484/RM-485/RM-486Service Manual Level 1&2 16 Confidential Copyright 2009 NOKIA All rights reserved Version 1.0 ISSUE 1 25)Use the SS-93 to detach the antenna and then remove it.26)Disconnect the CON