ISO管道标准(ISO pipe standards).pdf

《ISO管道标准(ISO pipe standards).pdf》由会员分享，可在线阅读，更多相关《ISO管道标准(ISO pipe standards).pdf（20页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、ISO管道标准(ISO pipe standards)http:/ 15:10:10ISO管道标准(ISO pipe standards)ANSI|BS|DIN|EN|GB|ISO|JIS|NF|DIC编号中文名称英文名称IEC 60794-3-10-2002光学纤维电缆.第3-10部分:户外电缆.管道光缆和直埋通信光缆的系列规范Optical fibre cables-Part 3-10:Outdoor cables;Familyspecification for duct anddirectly buried opticaltelecommunication cablesIEC 60794

2、-3-12-2005光缆.第3-12部分:室外电缆.房屋布线用管道和直埋通信光缆的详细规范Optical fibre cables-Part 3-12:Outdoor cables-Detailedspecification for duct anddirectly buried opticaltelecommunication cables foruse in premises cablingIEC 61084-1AMD 1-1993电气装置用电缆槽和管道系统第1部分:一般要求 修改1Cable trunking and ductingsystems for electricalinstal

3、lations;part 1:generalrequirements;amendment 1IEC 61084-1-1991电气装置用电缆槽和管道系统第1部分:一般要求Cable trunking and ductingsystems for electricalinstallations;part 1:generalrequirementsIEC 61084-2-1-1996电气装置用电缆槽和管道系统第2部分:特殊要求 第1节:安装在墙上或天花板上的电缆槽和管道系统Cable trunking and ductingsystems for electricalinstallations-Pa

4、rt 2:Particular requirements-Section 1:Cable trunking andducting systems intended formounting on walls or ceilingsIEC 61084-2-2-2003电气装置用电缆槽和管道系统.第2-2部分:特殊要求.安装在地板下和与地板齐平的设施用电缆槽和管道系统Cable trunking and ductingsystems for electricalinstallations-Part 2-2:Particular requirements;Cabletrunking systems a

5、nd cableducting systems intended forunderfloor and flushfloorinstallationsIEC 61084-2-4-1996电气装置用电缆槽和管道系统第2部分:特殊要求 第4节:接线柱Cable trunking and ductingsystems for electricalinstallations-Part 2:Particular requirements-Section 4:Service polesIEC 61400-21-2001风轮发电机系统 第21部分：管道连接风轮机功率质量特性的测量和评定Wind turbine

6、 generatorsystems-Part 21:Measurement and assessmentof power qualityISO管道标准(ISO pipe standards)http:/ 15:10:10characteristics of gridconnected wind turbinesISO 10380-2003管道系统.波纹状金属软管和软管配件Pipework-Corrugated metalhoses and hose assembliesISO 10466-1997塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材 耐初始环状变形可能性试验方法Plastics

7、piping systems-Glass-reinforcedthermosetting plastics(GRP)pipes-Test method to provethe resistance to initial ringdeflectionISO 10467-2004压力和无压力排水和排污塑料管道系统.基于不饱和聚酯树脂的玻璃增强热固性塑料(GRP)系统Plastics piping systems forpressure and non-pressuredrainage and sewerage-Glass-reinforcedthermosetting plastics(GRP)s

8、ystems based onunsaturated polyester(UP)resinISO 10472-3-1997工业洗衣机安全要求 第3部分:管道式洗涤(联合)机及相关机械Safety requirements forindustrial laundry machinery-Part 3:Washing tunnel linesincluding componentmachinesISO 10508-2006冷热水装置用塑料管道系统.分类和设计指南Plastics piping systems for hotand cold water installations-Guidance

9、for classificationand designISO 10639-2004压力和无压力给水塑料管道系统.基于不饱和聚酯树脂的玻璃增强热固性塑料(GRP)系统Plastics piping systems forpressure and non-pressurewater supply-Glass-reinforced thermosettingplastics(GRP)systems basedon unsaturated polyester(UP)resinISO 10790-1999封闭管道中流体流量的测量 科里奥利计选择、安装和使用指南(流量、密度和容量的测定)Measurem

10、ent of fluid flow inclosed conduits-Guidance tothe selection,installation anduse of Coriolis meters(massflow,density and volume flowmeasurements)ISO 10802-1992球墨铸铁管道 安装后水压试验Ductile iron pipelines;hydrostatic testing afterinstallationISO 10804-1-1996球墨铸铁管道用减震连接系统第1部分:设计规则和定型试验Restrained joint systems

11、 forductile iron pipelines-Part 1:Design rules and type testingISO 10806-2003管道工程.波纹状金属软管用配件Pipework-Fittings forcorrugated metal hosesISO管道标准(ISO pipe standards)http:/ 15:10:10ISO 10807-1994管道工程 在爆燃性空气中电缆保护用皱纹软金属管组件Pipework-Corrugated flexiblemetallic hose assemblies forthe protection of electrical

12、cables in explosiveatmospheresISO 10838-1-2000燃气用聚乙烯管道系统的机械式管件 第1部分:公称外径小于或等于63mm的管道用金属管件Mechanical fittings forpolyethylene piping systemsfor the supply of gaseousfuels-Part 1:Metal fittingsfor pipes of nominal outsidediameter less than or equalto 63 mmISO 10838-2-2000燃气用聚乙烯管道系统的机械式管件 第2部分:公称外径大于63

13、mm的管道用金属管件Mechanical fittings forpolyethylene piping systemsfor the supply of gaseousfuels-Part 2:Metal fittingsfor pipes of nominal outsidediameter greater than 63 mmISO 10838-3-2001燃气用聚乙烯管道系统的机械管件 第3部分：标称外径小于或等于63mm的热塑管件Mechanical fittings forpolyethylene piping systemsfor the supply of gaseousfue

14、ls-Part 3:Thermoplasticsfittings for pipes of nominaloutside diameter less than orequal to 63 mmISO 10928-1997塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材和管件 回归分析及其使用方法Plastics piping systems-Glass-reinforcedthermosetting plastics(GRP)pipes and fittings-Methodsfor regression analysis andtheir useISO 10931-2005工业用塑料管道系

15、统.聚偏氟乙烯(PVDF).部件和系统的规范Plastics piping systems forindustrial applications-Poly(vinylidene fluoride)(PVDF)-Specifications forcomponents and the systemISO 10952-1999塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材和管件 在变形条件下断面内部耐化学腐蚀性的测定Plastics piping systems-Glass-reinforcedthermosetting plastics(GRP)pipes and fittings-Dete

16、rmination of theresistance to chemical attackfrom the inside of a section ina deflected conditionISO 11563-2003原油和石油制品.散货运输.实现管道满度的指南Crude petroleum andpetroleum products-Bulkcargo transfer-Guidelines forachieving the fullness ofpipelinesAcoustics-Measurement ofISO管道标准(ISO pipe standards)http:/ 15:1

17、0:10ISO 11691-1995声学 无气流管道消声器插入损失的测量 实验室测量法insertion loss of ductedsilencers without flow-Laboratory survey methodISO 13253-1995管道式空调器和气-气加热泵性能的检测和额定功率Ducted air-conditioners andair-to-air heat pumps-Testing and rating forperformanceISO 13261-1-1998空调和空气源热泵设备的声功率额定值 第1部分:无室外管道设备Sound power rating of

18、 air-conditioning and air-sourceheat pump equipment-Part1:Non-ducted outdoorequipmentISO 13261-2-1998空调和空气源热泵设备的声功率额定值 第2部分:无室内管道设备Sound power rating of air-conditioning and air-sourceheat pump equipment-Part2:Non-ducted indoorequipmentISO 13359-1998封闭管道中导电液体流量的测量 法兰电磁流量计 总长Measurement of conductive

19、liquid flow in closed conduits-Flanged electromagneticflowmeters-Overall lengthISO 13623-2000石油和天然气工业.管道输送系统Petroleum and natural gasindustries-Pipelinetransportation systemsISO 13628-5-2002石油和天然气工业.水下采油系统的设计和操作.第5部分:水下缆线和管道Petroleum and natural gasindustries-Design andoperation of subseaproduction

20、systems-Part 5:Subsea umbilicalsISO 13678TechnicalCorrigendum1-2005石油和天然气工业.对套管、管道和管线用的螺纹油的评定和试验.技术勘误1Petroleum and natural gasindustries-Evaluation andtesting of thread compoundsfor use with casing,tubingand line pipe;TechnicalCorrigendum 1ISO 13678-2000石油和天然气工业 对套管、管道和管线用的螺纹绝缘膏的评价和试验Petroleum and

21、natural gasindustries-Evaluation andtesting of thread compoundsfor use with casing,tubingand line pipeISO 13703TechnicalCorrigendum1-2002石油和天然气工业.近海生产平台上管道系统的设计和安装.技术勘误1Petroleum and natural gasindustries-Design andinstallation of piping systemson offshore productionplatforms;TechnicalCorrigendum 1I

22、SO 13703-石油和天然气工业 海上开采平Petroleum and natural gasindustries-Design andISO管道标准(ISO pipe standards)http:/ 15:10:102000台上管道系统的设计和安装installation of piping systemson offshore productionplatformsISO 13761-1996塑料管材和管件 20以上使用的聚乙烯管道的压力折减系数Plastics pipes and fittings-Pressure reduction factors forpolyethylene

23、pipeline systemsfor use at temperaturesabove 20 CISO 13783-1997塑料管道系统 硬聚氯乙烯(PVC-U)端部承受负荷的双承口连接件 密封和承受弯曲及内压的试验方法Plastics piping systems-Unplasticized poly(vinylchloride)(PVC-U)end-load-bearing double-socket joints-Test method for leaktightnessand strength while subjectedto bending and internalpressur

24、eISO 13844-2000塑料管道系统 用于硬聚氯乙烯管道的弹性密封环式承口连接件 负压下密封试验方法Plastics piping systems-Elastomeric-sealing-ring-typesocket joints of unplasticizedpoly(vinyl chloride)(PVC-U)for use with PVC-U pipes-Test method for leaktightnessunder negative pressureISO 13845-2000塑料管道系统 用于硬聚氯乙烯管道的弹性密封环式承口连接件 内压下角度偏转密封试验方法Plas

25、tics piping systems-Elastomeric-sealing-ring-typesocket joints for use withunplasticized poly(vinylchloride)(PVC-U)pipes-Testmethod for leaktightnessunder internal pressure andwith angular deflectionISO 13846-2000塑料管道系统 热塑性加压塑料管道用端部负载轴承和非端部负载轴承的安装和连接 在内水压下长期密封的试验方Plastics piping systems-End-load-bea

26、ring and non-end-load-bearing assemblies andjoints for thermoplasticspressure piping-Test methodfor long-term leaklightnessunder internal water pressureISO 13847TechnicalCorrigendum1-2001石油和天然气工业.管道输送系统.管道焊接.技术勘误1Petroleum and natural gasindustries-Pipelinetransportation systems-Welding of pipelines

27、;Technical Corrigendum 1ISO 13847-2000石油和天然气工业 管道输送系统 管道的焊接Petroleum and natural gasindustrie-Pipelinetransportation systems-Welding of pipelinesISO 13951-2001塑料管道系统 聚烯烃管与管或管与管件之间的组件耐拉申负Plastics piping systems-Testmethod for the resistance ofpolyolefin pipe/pipe orISO管道标准(ISO pipe standards)http:/ 1

28、5:10:10载试验方法pipe/fitting assemblies totensile loadingISO 13968-1997塑料管道及导管系统 热塑性塑料管材 环揉性的测定Plastics piping and ductingsystems-Thermoplasticspipes-Determination of ringflexibilityISO 14164-1999固定源排放 管道路气体流速的测定 自动监测方法Stationary source emissions-Determination of the volumeflowrate of gas streams induct

29、s-Automated methodISO 14313-1999石油和天然气工业 管道输送系统 管道阀Petroleum and natural gasindustries-Pipelinetransportation systems-Pipeline valvesISO 14511-2001封闭管道中流体流量的测量 热质流量计Measurement of fluid flow inclosed conduits-Thermalmass flowmetersISO 14531-1-2002塑料管道和配件.气体燃料运输用交联聚乙烯管道系统.米制系列.第1部分:管Plastics pipes an

30、d fittings-Crosslinked polyethylene(PE-X)pipe systems for theconveyance of gaseous fuels;Metric series;Specifications-Part 1:PipesISO 14531-2-2004塑料管道和配件.气体燃料运输用交联聚乙烯管道系统.米制系列.规范.第2部分:热熔连接用配件Plastics pipes and fittings-Crosslinked polyethylene(PE-X)pipe systems for theconveyance of gaseous fuels-Met

31、ric series-Specifications-Part 2:Fittings for heat-fusion jointingISO 14531-3-2006塑料管道和配件.气体燃料运输用交联聚乙烯管道系统.米制系列.规范.第3部分:机械连接用配件(包括PE-X/金属转Plastics pipes and fittings-Crosslinked polyethylene(PE-X)pipe systems for theconveyance of gaseous fuels-Metric series-Specifications-Part 3:Fittings for mechani

32、caljointing(including PE-X/metaltransitions)ISO 14531-4-2006塑料管道和配件.气体燃料运输用交联聚乙烯(PE-X)管道系统.米制系列.规范.第4部分:系统设计和安装指南Plastics pipes and fittings-Crosslinked polyethylene(PE-X)pipe systems for theconveyance of gaseous fuels-Metric series-Specifications-Part 4:System design andinstallation guidelinesISO 1

33、4692-3-2002石油和天然气工业.玻璃纤维增强塑料管.第3部分:系统管道Petroleum and natural gasindustries-Glass-reinforcedplastics(GRP)piping-Part 3:System pipingISO管道标准(ISO pipe standards)http:/ 15:10:10ISO 14723-2001石油和天然气工业 管道输送系统 海底管道阀Petroleum and natural gasindustries-Pipelinetransportation systems-Subsea pipeline valvesISO

34、 14726-2-2002船和造船技术.管道系统的内容的识别颜色.第2部分:中等差异和/或功能用补充颜色Ships and marine technology-Identification colours for thecontent of piping systems-Part 2:Additional colours fordifferent media and/orfunctionsISO 15002-2000医用气体管道系统终端装置用气流量测量装置Flow-metering devices forconnection to terminal unitsof medical gas pi

35、pelinesystemsISO 15306-2003玻璃增强热固性塑料管道.抗周期性内压力的测定Glass-reinforcedthermosetting plastics(GRP)pipes-Determination of theresistance to cyclic internalpressureISO 15348-2002管道工程.金属波纹管膨胀节.总则Pipework-Metal bellowsexpansion joints-GeneralISO 15465-2004管道.带绕金属软管和软管组件Pipework-Stripwound metalhoses and hose a

36、ssembliesISO 15493TechnicalCorrigendum1-2004工业用塑料管道系统.丙烯腈-丁二烯-苯乙烯塑料(ABS)、未增塑的聚氯乙烯(PVC-U)和氯化聚氯乙烯(PVC-C).元件Plastics piping systems forindustrial applications-Acrylonitrile-butadiene-styrene(ABS),unplasticizedpoly(vinyl chloride)(PVC-U)and chlorinated poly(vinylchloride)(PVC-C)-Specifications for compo

37、nentsand the system-Metricseries;Technical Corrigendum1ISO 15493-2003工业用塑料管道系统.丙烯腈-丁二烯-苯乙烯塑料(ABS)、未增塑的聚氯乙烯(PVC-U)和氯化聚氯乙烯(PVC-C).元件Plastics piping systems forindustrial applications-Acrylonitrile-butadiene-styrene(ABS),unplasticizedpoly(vinyl chloride)(PVC-U)and chlorinated poly(vinylchloride)(PVC-C)

38、-Specifications for componentsand piping systems;MetricseriesISO 15494-2003工业用塑料管道系统.聚丁烯(PE)聚乙烯(PE)聚丙烯(PP).元件和系统的规范.米制系列Plastics piping systems forindustrial applications-Polybutene(PB),polyethylene(PE)and polypropylene(PP)-Specifications for componentsand the systems;MetricISO管道标准(ISO pipe standard

39、s)http:/ 15:10:10seriesISO 15589-1-2003石油和天然气工业.管道运输系统的阴极保护.第1部分:陆地管线Petroleum and natural gasindustries-Cathodicprotection of pipelinetransportation systems-Part1:On-land pipelinesISO 15589-2-2004石油和天然气工业.管道运输系统的阴极保护.第2部分:海上管线Petroleum and natural gasindustries-Cathodicprotection of pipelinetranspo

40、rtation systems-Part2:Offshore pipelinesISO 15590-1-2001石油和天然气工业 管道输送系统用诱导弯头、管件和法兰第1部分：诱导弯头Petroleum and natural gasindustries-Induction bends,fittings and flanges forpipeline transportationsystems-Part 1:InductionbendsISO 15590-2-2003石油和天然气工业.管道输送系统用进气弯管、管件和法兰.第2部分:管件Petroleum and natural gasindust

41、ries-Induction bends,fittings and flanges forpipeline transportationsystems-Part 2:FittingsISO 15590-3-2004石油和天然气工业.管道输送系统用进气弯头、管件和法兰.第3部分:法兰Petroleum and natural gasindustries-Induction bends,fittings and flanges forpipeline transportationsystems-Part 3:FlangesISO 15649-2001石油和天然气工业 管道Petroleum and

42、 natural gasindustries-PipingISO 15665TechnicalCorrigendum1-2004声学.管道、阀门和法兰的隔音.技术勘误1Acoustics-Acoustic insulationfor pipes,valves and flanges;Technical Corrigendum 1ISO 15749-2-2004船舶和海上技术.船舶和海上结构物的排水系统.第2部分:重力系统用卫生排水和排水管道Ships and marine technology-Drainage systems on shipsand marine structures-Par

43、t2:Sanitary drainage,drainpiping for gravity systemsISO 15749-3-2004船舶和海上技术.船舶和海上结构物的排水系统.第3部分:真空系统用卫生排水和排水管道Ships and marine technology-Drainage systems on shipsand marine structures-Part3:Sanitary drainage,drainpiping for vacuum systemsISO 15837-2004船舶和海上技术.管道系统中使用的有垫圈机械联接件.性能规范Ships and marine te

44、chnology-Gasketed mechanicalcouplings for use in pipingsystems-PerformancespecificationISO管道标准(ISO pipe standards)http:/ 15:10:10ISO 15838-2003船舶与海上技术.管道设施中使用的带密封衬垫的机械耦合配件.性能规范Ships and marine technology-Fittings for use withgasketed mechanicalcouplings used in pipingapplications-Performancespecific

45、ationISO 15840-2004船舶和海上技术.用于海上设备的热固性树脂纤维管道和装置的标准规范Ships and marine technology-Standard specification forthermosetting resin fibreglasspipe and fittings to be usedfor marine applicationsISO 15874-1-2003冷热水装置用塑料管道系统.聚丙烯(PP).第1部分:总则Plastics piping systems for hotand cold water installations-Polypropyl

46、ene(PP)-Part 1:GeneralISO 15874-2-2003冷热水装置用塑料管道系统.聚丙烯(PP).第2部分:管Plastics piping systems for hotand cold water installations-Polypropylene(PP)-Part 2:PipesISO 15874-3-2003冷热水装置用塑料管道系统.聚丙烯(PP).第3部分:配件Plastics piping systems for hotand cold water installations-Polypropylene(PP)-Part 3:FittingsISO 1587

47、4-5-2003冷热水装置用塑料管道系统.聚丙烯(PP).第5部分:系统的适用性Plastics piping systems for hotand cold water installations-Polypropylene(PP)-Part 5:Fitness for purpose of thesystemISO 15875-1-2003冷热水装置用塑料管道系统.交联聚乙烯(PE-X).第1部分:总则Plastics piping systems for hotand cold water installations-Crosslinked polyethylene(PE-X)-Part

48、 1:GeneralISO 15875-2-2003冷热水装置用塑料管道系统.交联聚乙烯(PE-X).第2部分:管道Plastics piping systems for hotand cold water installations-Crosslinked polyethylene(PE-X)-Part 2:PipesISO 15875-3-2003冷热水装置用塑料管道系统.交联聚乙烯(PE-X).第3部分:配件Plastics piping systems for hotand cold water installations-Crosslinked polyethylene(PE-X)-

49、Part 3:FittingsISO 15875-5-2003冷热水装置用塑料管道系统.交联聚乙烯(PE-X).第5部分:系统的适用性Plastics piping systems for hotand cold water installations-Crosslinked polyethylene(PE-X)-Part 5:Fitness forpurpose of the systemISO 15876-1-2003冷热水装置用塑料管道系统.聚丁烯(PB).第1部分:总则Plastics piping systems for hotand cold water installations

50、-Polybutylene(PB)-Part 1:ISO管道标准(ISO pipe standards)http:/ 15:10:10GeneralISO 15876-2-2003冷热水装置用塑料管道系统.聚丁烯(PB).第2部分:管道Plastics piping systems for hotand cold water installations-Polybutylene(PB)-Part 2:PipesISO 15876-3-2003冷热水装置用塑料管道系统.聚丁烯(PB).第3部分:配件Plastics piping systems for hotand cold water ins