2023年内蒙古PMP资格认证考试考试模拟卷.docx

《2023年内蒙古PMP资格认证考试考试模拟卷.docx》由会员分享，可在线阅读，更多相关《2023年内蒙古PMP资格认证考试考试模拟卷.docx（18页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、2023年内蒙古PMP资格认证考试考试模拟卷本卷共分为1大题50小题，作答时间为180分钟，总分100分，60分及格。一、单项选择题（共50题，每题2分。每题的备选项中，只有一个最符合题意） 1.Having the client assist in the project planning _ A) is not always recommended since the client does not have adequate knowledge of project management B) enables better planning since they are familiar

2、 with project insights C) provides only some understanding, but usually the client dealing with the project has only limited authority D) usually confuses the situation 2.What must be in place prior to establishing change control on a project? A) Project charter. B) Work Breakdown Structure. C) Base

3、line. D) Statement of Work. 3.The causes of variances and the reasoning behind the corrective action chosen are summarized in the _ A) work Breakdown Structure B) accounting codes for the activities C) lessons learned D) performance reports 4.In a project environment, functional managers are respons

4、ible for _ A) acting as a sounding board for clarification of critical issues B) establishing administrative policies C) outlining time, cost and performance constrains D) identifying and developing mitigation strategies for areas of risk 5.The owner (buyer) of a project usually has the right to dir

5、ect changes to the scope of work while the project work is being accomplished. Often, the owner will orally request a change and insist that the change be initiated immediately without the normal documentation (e.g.a change order). When the change be initiated without documentation _ A) the owner as

6、sumes all responsibility for paying for the change although the owner may at a later not want the change B) the owner assumes responsibility for one-half the cost of the change until the documentation is completed and all at the same time C) the project manager assumes all risk for the change, if in

7、itiated, until the documentation is received D) the project manager assumes only the risk of misinterpreting the owner's oral change directive, while the owner assumes responsibility for paying for the request change 6.Which one of the following is NOT a trade-off decision that must be made in t

8、he development of the project plan? A) Whether to use skilled or unskilled laborers. B) The amount of profit vendors should make versus the profit other vendors have received in the past. C) Manufacturing in-house or sub-contracting out the work. D) The important of cost versus quality. 7.The intern

9、al communication linkages are the most important to the health of the project. Which of the following is one of the major diving forces for effective communication in a project? A) Optimization B) Differentiation C) Selection D) Integration 8.A project plan is _ A) a formal, approved document used t

10、o guide both project execution and project control B) a document issued by senior management that provides the product manager with the authority to apply organization resources of the company C) a document description the organizational breakdown structure of the company D) a narrative description

11、of products or services to be supplied 9.Controlling occurs _ A) on a continual basis throughout the project B) at the end of each phase of the project life cycle to assess its success in meeting project objectives C) at the end of each planning process D) on a continual basis throughout the executi

12、ng process and as needed in the other process 10.The project plan is used to do all of the following EXCEPT _ A) document project planning assumption B) define the content of management reviews C) identify risks that arise during project execution D) provide a baseline for progress measurement and p

13、roject control 11.The scope of a project is fully described by _ A) the Statement of Work B) a five level project/work breakdown structure C) the sum of the products and service delivered D) the Request for Proposal 12.The Scope Management Plan is included in which of the following document? A) Proj

14、ect plan. B) The Work Breakdown Structure. C) The Scope Statement. D) Project Specification. 13.Which of the following is NOT a good characteristic of an effective project objective? A) Specific completion date. B) Measurable. C) Definitive associated costs. D) Inconsistent with strategic organizati

15、onal objective. 14.A project control system _ A) monitors and controls the project's schedule, costs, scope, budgets, etc. B) is a mechanism which reacts to the current project status in order to ensure accomplishment of project objectives C) is only needed on large mega projects D) is a system

16、for controlling and executing project documentation in a uniform and timely manner 15.The scope baseline is _ A) the original description of the project's end results B) a summary description of the project's original content and end product, including basic budgetary, and time constraint da

17、ta C) the original project budget and schedule D) A and C 16.All of the following rules are true about the lowest level WBS work packages EXCEPT work package _ A) can be completed without interruption in one location B) can be confidently estimated C) must be assigned to only one person D) must be c

18、ompleted with 80 hours 17.The preparation of the scope baseline involves the _ A) functional manager B) project team C) all the stakeholders D) project sponsor 18.Which of the following is an important input to scope verification? A) Work results B) Historical information C) Formal acceptance D) Cha

19、nge request 19.All of the following are tools for scope verification EXCEPT _ A) product review B) audit C) walk through D) sensitivity analysis 20.All of the following are needed to create the WB$ EXCEPT _ A) history information B) project charter C) change request D) scope statement 21.When should

20、 scope verification be done? A) At the end of the project. B) At the beginning of the project. C) During each phase of the project. D) During planning. 22.Product verification is different from scope verification, product verification _ A) occurs during the execution phase B) verifies that the corre

21、ct products have been used C) obtains customer sign-off D) make sure all work is completed 23.As a project manager of IT, if your supplier asked you to provide a product description, which of the fowling is _ A) scope statement B) statement of work C) project charter D) contract 24.The mark of proje

22、ct success is _ A) satisfying with time and cost B) satisfying with time, cost and quality C) within time, cost, performance and accepted by the customer D) none of above 25.The project consists of 15 separate projects. The PMO will have a project management information system. This system will be a

23、n on-line repository of all program data. You will collect description of all work components for each of the 15 projects. This information will form an integral part of the _ A) chart of account B) WBS dictionary C) WBS structure template D) earned value management reports 26.The project scope stat

24、ement furnishes a basis for _ A) future project decision including the criteria used to determine if the project or phase has been successfully finished B) provides link to the client functional management groups C) allowing the project to move to the next phase D) a way to provide updated informati

25、on to the accounting department 27.May the project team do to confirm the scope of the project is on track? A) Review change requests that have been submitted and approved. B) Obtain status from responsible individuals on the team. C) Conduct walk through, inspections and reviews. D) Complete a scop

26、e report and submit it to management. 28.Marketing department has just discovered that a competitor is offering a new feature, using a new technology, on a product similar to the one being created by your project. They submit a change request that is result of _ A) an external event B) an error or o

27、mission in defining the scope of the product C) an error or omission in defining the scope of the project D) a value-adding change 29.The project scope is measured against the _, while the product scope is measured against the _ A) plan, requirements B) requirements, measure of success C) scope base

28、line, scope definition D) contract, verification 30.An example of scope verification is _ A) review the performance of an installed software module B) managing changes to the project schedule C) decomposing the WBS to a work package level D) performing a benefit/cost analysis to determine if we shou

29、ld proceed with the project 31.During the execution phase of the project, you realized the subcontractors are working with incomplete and different scope statements. As the project manager, what should you do FIRST? A) Check the work completed against the correct scope statements. B) Review the scop

30、e of work with the stakeholders. C) Document the inconsistencies to management, calculating the cost of nonconformance. D) Stop all activities until the scope of the work complete. 32.Over the last few weeks, the team has made three scope changes to the activities and tasks on the projects. The proj

31、ect manager must be MOST careful to _ A) record all the changes B) provide documentation on all the changes to the sponsor C) make sure the changes are reflected in the project scope D) prevent more changes from occurring 33.The customer wants to expand the scope of the project after performance mea

32、surement baseline has been established. Which document will the customer need to submit? A) Change request. B) Statement of work. C) Revised project schedule. D) Invoice. 34.During a walk through of a task, you discover that a team member is completing the work differently than stated in the WBS dir

33、ectory. How should you deal with this? A) Tell the team member to take a corrective action. B) Determine if the alternative way is acceptable to the functional manager. C) Ask the team member if the changes are necessary. D) Determine if the changes also change the scope of the work package. 35.Two

34、months into a design project, the customer requested a modification to the project. The change was made a without notify the project manager. During the final testing phase, result were different from what was planned for, This scenario is an example of which of following? A) Poor definition of the

35、test plan. B) Poor development of quality management plan. C) Poor use of scope change control. D) Poor adherence to the communication plan. 36.If a project manager is told that modifying the scope of the project may provide added value for the customer, the project manager should _ A) change the WB

36、S B) change the scope baseline C) fix a variance report D) postpone the modification till a separate enhancement project in 37.Management-by-objectives refers to _ A) confirming practical objectives B) making objectives clearly C) increasing the project manager's power D) A and B 38.Configuratio

37、n management describes procedures for applying technical and administrative direction and surveillance. Which one of the following tasks is not performed in configuration management? A) Identifying functional and physical characteristics of an item or system. B) Controlling changes to characteristic

38、s. C) Performing an audit to verify conformance to requirements. D) Allowing automatic approval of changes. 39.You have been appointed project manager for a new project in your organization and must prepare a project plan. To help you provide the framework for this project, you decide to prepare a W

39、BS to show the magnitude and complexity of the work involved. No WBS templates are available to help you. To prepare the WBS, you first step should be to _ A) determine the cost and duration estimates for each project deliverable B) identify the major project deliverable C) identify the components o

40、f each project deliverable D) determine the key tasks to be performed 40.You are working on a telecommunication project. The product and system requirements have been determined and agreed to by the customer, your management, and other key stakeholders. Work is proceeding on the project according to

41、 schedule. Everyone seems pleased with the progress to date. You have just learned that a new regulatory requirement will cause a change in one of the project's performance specification. To ensure that this change is incorporated onto the project plan, you should _ A) call a meeting of the chan

42、ge control board B) change the WBS, project schedule, and project plan to reflect the new requirement C) prepare a change request D) immediately inform all affected stakeholders of the new approach to take on tee project 41.The PM distributed a document to the stakeholders which described the softwa

43、re to be developed, the functionality, the users it would serve and the installation timeline. The document was an example of _ A) product scope B) project scope C) a combination of project and product scope D) it was not complete enough to be either a product or a project scope document 42.The PM a

44、nd project team have completed decomposition and have verified scope, when the marketing department makes a minor change to the product functionality to improve its appeal to the end customer. The PM and the project team _ A) refuses to accept the change since the scope has been veriied B) modifies

45、the WBS and the decomposition C) accepts the change and incorporates it into the WBS, modifying the budget and the schedule and assigning accountability to the marketing team D) proceeds per the change process 43.The scope management plan is developed as _ A) part of the scope verification phase B) part of scope planning C) the initial steps of scope control D) part of the Scope Statement 44.The purpose of the scope statement includes all but which of the following? A) Provides a basis for future pro