CM12864-1规格书 KS0108控制器.pdf

《CM12864-1规格书 KS0108控制器.pdf》由会员分享，可在线阅读，更多相关《CM12864-1规格书 KS0108控制器.pdf（10页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、CM12864-1 规格书 12864 图形点阵说明书LCD12864 点阵屏带 KS0108/0107 控制器 兼容 LM12864DFCLM12864DDW LM12864DDY OCM12864-1CM12864-1 BLWAA-5V(蓝底白字)CM12864-1 SLWDA-5V(绿底黑字）CM12864-1 FLWAA-5V(白底黑字）一基本特征：(1)电压:3.0-3.3V/4.8-5V(2)STN 反射/正视透射模式/半透(3)显式模式:蓝底白字(4)显式角度:6/12/9 点钟直视(5)驱动方式:1/32Dvty;1/6Bias(6)工作温度(Ta):-10+55，存储温度:-

2、20+70(7)背光特征:LED 背光(白色/黄绿色)(8)模块封装方式:COB（9）接口：并口（KS0108 控制器）二产品参数：三限定参数：四平面尺寸图：五原理图：六引脚描述：七直流特性：八：接口时序：九指令表：十应用：十一实物图片：十二产品规格多样化：十三程序参考：（并口做参考用、对你有用记得给个好评）#include#include#define lcd_dataP1sbit cs1=P23;sbit cs2=P24;sbitdi=P20;sbitrw=P21;sbite=P22;void delay(int t)int i,j,k;for(i=0;it;i+)for(j=0;j255

3、;j+)k+;void write_com_l(unsigned int command)cs1=1;rw=0;di=0;lcd_data=command;e=1;e=0;cs1=0;void write_data_l(unsigned int data0)cs1=1;rw=0;di=1;lcd_data=data0;e=1;e=0;cs1=0;void write_com_r(unsigned int command)cs2=1;rw=0;di=0;lcd_data=command;e=1;e=0;cs2=0;void write_data_r(unsigned int data0)cs2=

4、1;rw=0;di=1;lcd_data=data0;e=1;e=0;cs2=0;void disp0()unsigned int i,j;for(i=0;i8;i+)write_com_l(0 xb8+i);write_com_r(0 xb8+i);write_com_l(0 x40);write_com_r(0 x40);for(j=0;j64;j+)write_data_l(0 xaa);write_data_r(0 xaa);void disp1()unsigned int i,j;for(i=0;i8;i+)write_com_l(0 xb8+i);write_com_r(0 xb8

5、+i);write_com_l(0 x40);write_com_r(0 x40);for(j=0;j64;j+)write_data_l(0 x55);write_data_r(0 x55);void disp2()unsigned int i,j;for(i=0;i8;i+)write_com_l(0 xb8+i);write_com_r(0 xb8+i);write_com_l(0 x40);write_com_r(0 x40);for(j=0;j64;j+)write_data_l(0 x0f);write_data_r(0 x0f);void disp3()unsigned int

6、i,j;for(i=0;i8;i+)write_com_l(0 xb8+i);write_com_r(0 xb8+i);write_com_l(0 x40);write_com_r(0 x40);for(j=0;j64;j+)write_data_l(0 xf0);write_data_r(0 xf0);void init_lcd()/初始化 LCD 清屏write_com_l(0 x3e);write_com_r(0 x3e);write_com_l(0 x3f);write_com_r(0 x3f);write_com_l(0 xc0);write_com_r(0 xc0);write_com_l(0 xb8);write_com_r(0 xb8);write_com_l(0 x40);write_com_r(0 x40);for(;1;)disp0();delay(0 x0ff);disp1();delay(0 x0ff);disp2();delay(0 x0ff);disp3();delay(0 x0ff);void main()IE=0 x81;init_lcd();void innt0()interrupt 0do while(1);