橡胶密封圈在液体介质中的寿命评估(T-CSTM 00164E—2020).pdf

《橡胶密封圈在液体介质中的寿命评估(T-CSTM 00164E—2020).pdf》由会员分享，可在线阅读，更多相关《橡胶密封圈在液体介质中的寿命评估(T-CSTM 00164E—2020).pdf（3页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、ICS 71.040.30 CCS G 63 T/CSTM 00164E2020 Life prediction of rubber sealing rings in liquid medium 橡胶密封圈在液体介质中的寿命评估(English Translation)Issued by Chinese Society for Testing&Materials,Zhongguancun Issue date:2023-01-13 Implementation date:2023-04-13 T/CSTM 00164E2020 Foreword CSTM/FC05/TC11(The Safet

2、y and reliability of chemical materials technical committee of chemical materials field committee of Chinese Society for Testing&Materials)is in charge of this English translation.For the purposes of this translation,several changes(marked with*)of the Chinese original normative references have been

3、 made.In case of any doubt about the contents of English translation,the Chinese original shall be considered authoritative.This document is drafted in accordance with the rules given in the GB/T 1.12020 Directives for standardization Part 1:Rules for the structure and drafting of standardizing docu

4、ments.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.The issuing body of this document shall not be held responsible for identifying any or all such patent rights.This document was proposed by Field Committee CSTM/FC05,Chemical ma

5、terials.This document was prepared by Field Committee CSTM/FC05,Chemical materials,Technical committee TC11,Safety and reliability.T/CSTM 00164E2020 Life prediction of rubber sealing rings in liquid medium 1 Scope This document specifies a test method to predict life of rubber sealing rings in liqui

6、d medium at working condition.This document is applicable to predict life of rubber sealing rings in liquid medium at working condition.2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document

7、.For dated references,only the edition cited applies.For undated references,the latest edition of the referenced document(including any amendments)applies.*ISO 188:2011 Rubber,vulcanized or thermoplastic Accelerated ageing and heat resistance tests*ISO 815-1:2014 Rubber,vulcanized or thermoplastic D

8、etermination of compression set Part 1:At ambient or elevated temperatures*ISO 23529:2016 Rubber-General procedures for preparing and conditioning test pieces for physical test methods GB/T 27800-2011 Determination of the life for static sealing rubber products 3 Principle The rubber sealing rings a

9、re subjected to comprehensive effect of heat,oxygen,mechanical stress and liquid media,and aging under working conditions.The elevated temperature will accelerated aging of the rubber sealing rings,which shows chemical changes such as rubber crosslinking and degradation in the microscopic view and c

10、hanges in physical and mechanical properties in macroscopic view.Compression set and aging time show single change during aging.In a certain temperature range,the aging mechanism of rubber sealing rings at high temperature is the same as that under the working condition.4 Test Pieces Use the finishe

11、d product or part of the finished product of the rubber seal rings for the test.The compression deformation of the rubber seal rings should be more than 0.4mm under the working condition.5 Apparatus 5.1 Thickness gauge The instrument for measuring the thickness of dumb-bell test pieces and the axial thickness of ring test pieces shall be in accordance with that used in method A of*ISO 23529:2016.