DTU60P04品牌授权规格书.pdf

《DTU60P04品牌授权规格书.pdf》由会员分享，可在线阅读，更多相关《DTU60P04品牌授权规格书.pdf（9页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、1P-Channel 40-V(D-S)MOSFETFEATURESHalogen-free According to IEC 61249-2-21DefinitionTrenchFET Power MOSFET100%Rg and UIS TestedCompliant to RoHS Directive 2002/95/ECAPPLICATIONSPower SwitchLoad Switch in High Current ApplicationsDC/DC ConvertersPRODUCT SUMMARY VDS(V)RDS(on)()ID(A)Qg(Typ.)-400.012 at

2、 VGS=-10 V-60d600.018 at VGS=-4.5 V-48dTO-252SGDSGDP-Channel MOSFETNotes:a.Duty cycle 1%.b.See SOA curve for voltage derating.c.When Mounted on 1 square PCB(FR-4 material).d.Package limited.ABSOLUTE MAXIMUM RATINGS TC=25 C,unless otherwise notedParameter SymbolLimitUnitDrain-Source Voltage VDS-40VGa

3、te-Source Voltage VGS 20Continuous Drain Current(TJ=150 C)TC=25 CID-60dATC=70 C-60dPulsed Drain CurrentIDM-100Avalanche CurrentIAS-46Single Avalanche EnergyaL=0.1 mHEAS106mJMaximum Power DissipationaTC=25 CPD73.5bWTA=25 Cc2.5Operating Junction and Storage Temperature Range TJ,Tstg-55 to 150CTHERMAL

4、RESISTANCE RATINGS Parameter SymbolLimitUnitJunction-to-Ambient(PCB Mount)cRthJA50C/WJunction-to-Case(Drain)RthJC1.7DTU60P042Notes:a.Pulse test;pulse width 300 s,duty cycle 2%.b.Guaranteed by design,not subject to production testing.c.Independent of operating temperature.Stresses beyond those listed

5、 under“Absolute Maximum Ratings”may cause permanent damage to the device.These are stress ratings only,and functional operationof the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied.Exposure to absolute maximumrating con

6、ditions for extended periods may affect device reliability.SPECIFICATIONS TJ=25 C,unless otherwise notedParameterSymbol Test Conditions Min.Typ.Max.UnitStaticDrain-Source Breakdown VoltageVDSVDS=0 V,ID=-250 A-40VGate Threshold VoltageVGS(th)VDS=VGS,ID=-250 A-1-2.5Gate-Body LeakageIGSSVDS=0 V,VGS=20

7、V 250nAZero Gate Voltage Drain CurrentIDSSVDS=-40 V,VGS=0 V-1AVDS=-40 V,VGS=0 V,TJ=125 C-50VDS=-40 V,VGS=0 V,TJ=150 C-250On-State Drain CurrentaID(on)VDS -10 V,VGS=-10 V-50ADrain-Source On-State ResistanceaRDS(on)VGS=-10 V,ID=-22 A 0.0100.012VGS=-4.5 V,ID=-19 A0.0150.018Forward Transconductanceagfs

8、VDS=-15 V,ID=-22 A 45SDynamicbInput CapacitanceCissVGS=0 V,VDS=-20 V,f=1 MHz 5380pFOutput CapacitanceCoss570Reverse Transfer CapacitanceCrss 500Total Gate ChargecQgVDS=-20 V,VGS=-10 V,ID=-20 A 106159nCVDS=-20 V,VGS=-4.5 V,ID=-20 A6090Gate-Source ChargecQgs 22Gate-Drain ChargecQgd 27Gate ResistanceRg

9、f=1 MHz0.41.83.6Turn-On Delay Timectd(on)VDD=-20 V,RL=2 ID -10 A,VGEN=-10 V,Rg=1 1523nsRise Timectr1218Turn-Off Delay Timectd(off)70105Fall Timectf1827Drain-Source Body Diode Ratings and Characteristics TC=25 CbContinuous CurrentIS-60APulsed CurrentISM-100Forward VoltageaVSDIF=-10 A,VGS=0 V-0.8-1.5V

10、Reverse Recovery TimetrrIF=-10 A,dI/dt=100 A/s 3553nsPeak Reverse Recovery CurrentIRM(REC)-2-3AReverse Recovery ChargeQrr3350nCDTU60P043TYPICAL CHARACTERISTICS 25 C,unless otherwise notedOutput CharacteristicsTransfer Characteristics Transconductance0204060801000.00.51.01.52.02.5VGS=10 V thru 5 VVGS

11、=3 VVGS=4 VVDS-Drain-to-Source Voltage(V)-Drain Current(A)ID024681001234TC=25 CTC=125 CTC=-55 CVGS-Gate-to-Source Voltage(V)-Drain Current(A)ID025507510001020304050TC=125 CTC=-55 CTC=25 C-Transconductance(S)gfsID-Drain Current(A)On-Resistance vs.Drain CurrentOn-Resistance vs.Gate-to-Source VoltageGa

12、te Charge0.0050.0100.0150.0200.025020406080100VGS=10 VVGS=4.5 V-On-Resistance()RDS(on)ID-Drain Current(A)0.0000.0060.0120.0180.0240.030246810TJ=25 CTJ=150 C-On-Resistance()RDS(on)VGS-Gate-to-Source Voltage(V)02468100306090120VDS=32 VID=20 AVDS=20 VVDS=10 V-Gate-to-Source Voltage(V)Qg-Total Gate Char

13、ge(nC)VGSDTU60P044TYPICAL CHARACTERISTICS 25 C,unless otherwise notedSource-Drain Diode Forward VoltageCapacitanceOn-Resistance vs.Junction Temperature0.11101000.00.30.60.91.2TJ=25 CTJ=150 CVSD-Source-to-Drain Voltage(V)-Source Current(A)IS02000400060008000010203040CissCossCrssVDS-Drain-to-Source Vo

14、ltage(V)C-Capacitance(pF)-50-250255075100125150TJ-Junction Temperature(C)(Normalized)-On-ResistanceRDS(on)0.50.81.11.41.72.0ID=20 AVGS=4.5 VVGS=10 VThreshold VoltageDrain Source Breakdown vs.Junction TemperatureCurrent Derating-2.5-2.2-1.9-1.6-1.3-1.0-50-250255075100125150ID=250 A(V)VGS(th)TJ-Temper

15、ature(C)-51-49-47-45-43-50-250255075100125150ID=250 AVDS-Drain-to-Source Voltage(V)TJ-Junction Temperature(C)0204060800255075100125150Package LimitedTC-Case Temperature(C)ID-Drain Current(A)DTU60P045TYPICAL CHARACTERISTICS 25 C,unless otherwise notedSingle Pulse Avalanche Current Capability vs.TimeT

16、ime(s)(A)IDAV11010010-310-210-110-410-5TJ=25 CTJ=150 CSafe Operating Area0.010.111010010000.11101001 s,10 s,DCTC=25 CSingle PulseBVDSSLimitedLimited by RDS(on)*1 ms10 ms,100 ms100 AVDS-Drain-to-Source Voltage(V)*VGS minimum VGSat which RDS(on)is specified-Drain Current(A)IDNormalized Thermal Transie

17、nt Impedance,Junction-to-Case10-310-2001110-110-4100.20.1Square Wave Pulse Duration(s)Normalized Effective TransientThermal Impedance10.10.01Duty Cycle=0.50.050.02Single PulseDTU60P041TO-252AA CASE OUTLINENoteDimension L3 is for reference only.L3DL4L5bb2e1E1D1CA1gage plane height(0.5 mm)eb3EC2ALHMIL

18、LIMETERSINCHESDIM.MIN.MAX.MIN.MAX.A2.182.380.0860.094A1-0.127-0.005b0.640.880.0250.035b20.761.140.0300.045b34.955.460.1950.215C0.460.610.0180.024C20.460.890.0180.035D5.976.220.2350.245D15.21-0.205-E6.356.730.2500.265E14.32-0.170-H9.4010.410.3700.410e2.28 BSC0.090 BSCe14.56 BSC0.180 BSCL1.401.780.055

19、0.070L30.891.270.0350.050L4-1.02-0.040L51.141.520.0450.060ECN:X12-0247-Rev.M,24-Dec-12DWG:5347Package Information1RECOMMENDED MINIMUM PADS FOR DPAK(TO-252)0.420(10.668)Recommended Minimum PadsDimensions in Inches/(mm)0.224(5.690)0.180(4.572)0.055(1.397)0.243(6.180)0.087(2.202)0.090(2.286)Application

20、 Note1DisclaimerALL PRODUCT,PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVERELIABILITY,FUNCTION OR DESIGN OR OTHERWISE.Din-Tek Intertechnology,Inc.,its affiliates,agents,and employees,and all persons acting on its or their behalf(collectively,“Din-Tek”),disclaim any a

21、nd all liability for any errors,inaccuracies or incompleteness contained in any datasheet or in any otherdisclosure relating to any product.Din-Tek makes no warranty,representation or guarantee regarding the suitability of the products for any particular purpose orthe continuing production of any pr

22、oduct.To the maximum extent permitted by applicable law,Din-Tek disclaims(i)any and allliability arising out of the application or use of any product,(ii)any and all liability,including without limitation special,consequential or incidental damages,and(iii)any and all implied warranties,including wa

23、rranties of fitness for particularpurpose,non-infringement and merchantability.Statements regarding the suitability of products for certain types of applications are based on Din-Tek s knowledge of typicalrequirements that are often placed on Din-Tek products in generic applications.Such statements

24、are not binding statementsabout the suitability of products for a particular application.It is the customer s responsibility to validate that a particularproduct with the properties described in the product specification is suitable for use in a particular application.Parametersprovided in datasheet

25、s and/or specifications may vary in different applications and performance may vary over time.Alloperating parameters,including typical parameters,must be validated for each customer application by the customer stechnical experts.Product specifications do not expand or otherwise modify Din-Tek s ter

26、ms and conditions of purchase,including but not limited to the warranty expressed therein.Except as expressly indicated in writing,Din-Tek products are not designed for use in medical,life-saving,or life-sustainingapplications or for any other application in which the failure of the Din-Tek product

27、could result in personal injury or death.Customers using or selling Din-Tek products not expressly indicated for use in such applications do so at their own risk.Pleasecontact authorized Din-Tek personnel to obtain written terms and conditions regarding products designed for such applications.No lic

28、ense,express or implied,by estoppel or otherwise,to any intellectual property rights is granted by this document or byany conduct of Din-Tek.Product names and markings noted herein may be trademarks of their respective owners.Material Category PolicyDin-Tek Intertechnology,Inc.hereby certifies that

29、all its products that are identified as RoHS-Compliant fulfill thedefinitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Councilof June 8,2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment(EEE)-reca

30、st,unless otherwise specified as non-compliant.Please note that some Din-Tek documentation may still make reference to RoHS Directive 2002/95/EC.We confirm thatall the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.Din-Tek Intertechnology,Inc.hereby ce

31、rtifies that all its products that are identified as Halogen-Free follow Halogen-Freerequirements as per JEDEC JS709A standards.Please note that some Din-Tek documentation may still make referenceto the IEC 61249-2-21 definition.We confirm that all the products identified as being compliant to IEC 6

32、1249-2-21conform to JEDEC JS709A standards.Legal Disclaimer NoticeDisclaimerALL PRODUCT,PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVERELIABILITY,FUNCTION OR DESIGN OR OTHERWISE.Din-Tek Intertechnology,Inc.,its affiliates,agents,and employees,and all persons acting o

33、n its or their behalf(collectively,“Din-Tek”),disclaim any and all liability for any errors,inaccuracies or incompleteness contained in any datasheet or in any otherdisclosure relating to any product.Din-Tek makes no warranty,representation or guarantee regarding the suitability of the products for

34、any particular purpose orthe continuing production of any product.To the maximum extent permitted by applicable law,Din-Tek disclaims(i)any and allliability arising out of the application or use of any product,(ii)any and all liability,including without limitation special,consequential or incidental

35、 damages,and(iii)any and all implied warranties,including warranties of fitness for particularpurpose,non-infringement and merchantability.Statements regarding the suitability of products for certain types of applications are based on Din-Tek s knowledge of typicalrequirements that are often placed

36、on Din-Tek products in generic applications.Such statements are not binding statementsabout the suitability of products for a particular application.It is the customer s responsibility to validate that a particularproduct with the properties described in the product specification is suitable for use

37、 in a particular application.Parametersprovided in datasheets and/or specifications may vary in different applications and performance may vary over time.Alloperating parameters,including typical parameters,must be validated for each customer application by the customer stechnical experts.Product sp

38、ecifications do not expand or otherwise modify Din-Tek s terms and conditions of purchase,including but not limited to the warranty expressed therein.Except as expressly indicated in writing,Din-Tek products are not designed for use in medical,life-saving,or life-sustainingapplications or for any ot

39、her application in which the failure of the Din-Tek product could result in personal injury or death.Customers using or selling Din-Tek products not expressly indicated for use in such applications do so at their own risk.Pleasecontact authorized Din-Tek personnel to obtain written terms and conditi

40、ons regarding products designed for such applications.No license,express or implied,by estoppel or otherwise,to any intellectual property rights is granted by this document or byany conduct of Din-Tek.Product names and markings noted herein may be trademarks of their respective owners.Legal Disclaimer Notice