ABAQUS接触例题.pdf
( 4.5 )《ABAQUS接触例题.pdf》由会员分享，可在线阅读，更多相关《ABAQUS接触例题.pdf（34页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。
1、1/34 C.2 c.1 Click middle mouse 2/34 Click enter 3/34 Double click middle mouse 4/34 5/34 Click middle mouse 6/34 7/34 Click middle mouse 8/34 Click middle mouse 9/34 Click middle mouse exit sketcher 10/34 11/34 Enter 0.25,click enter,click middle mouse Select this edge 12/34 13/34 Click middle mous
2、e Enter 0.75,click enter,click middle mouse 14/34 15/34 Select boundary of the datum plane 16/34 Click middle mouse Click middle mouse 17/34 Select the cylindrical inner surface of the hole 18/34 C.3 19/34 Select all 20/34 21/34 Double click 22/34 23/34 C.5 Click middle mouse 24/34 Enter 0.012 Enter
3、 0.06,click enter Double click 25/34 26/34 C.6 27/34 click Flip to change the direction of the arrow.Click OK when the arrows point toward each other.In the text box that appears in the prompt area,type the clearance(0.04)that will remain between the two parts,as measured along the normal to the selected face of the fixed part,and press Enter.28/34 29/34 30/34 C.6 C.6.4 31/34 32/34 33/34 (0,0,0)ENTER END POINT(0,0,0.02)CLICK ENTER 34/34 Select all done C.7
- 配套讲稿：
如PPT文件的首页显示word图标，表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制：
部分文档作品中含有的国旗、国徽等图片，仅作为作品整体效果示例展示，禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词：
- ABAQUS 接触 例题
淘文阁 - 分享文档赚钱的网站所有资源均是用户自行上传分享，仅供网友学习交流，未经上传用户书面授权，请勿作他用。
限制150内