高分子物理Chapter-2-Solid-state-properties课件.ppt

《高分子物理Chapter-2-Solid-state-properties课件.ppt》由会员分享，可在线阅读，更多相关《高分子物理Chapter-2-Solid-state-properties课件.ppt（81页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、Chapter 2 Solid-state properties 2.1 Interaction of Molecules in Polymervan der Waals forces and Hydrogen bondinglStatic force is the force between polar moleculesAll polar molecules have permanent dipolar moment.The strength of static force between permanent dipoles depends on strength of dipolar m

2、oment and orientation degree.The interactional potential between two polar molecules with dipolar moment 1 and 2,and R of distance is:k is the Boltzman constant and T is temperaturelStatic force usually ranges from 13 to 21 kJ/mollInduced force is the interactional force between the permanent dipole

3、 of polar molecule and induced dipolar moment of another molecule induced by polar molecule.For two molecules with dipolar moment 1 and 2,and polarizability of 1 和 2,their interactional potential is:lInduced force usually ranges from 6 to13 kJ/mole lChromoscatter force is the interaction of instant

4、dipolar moments of molecules.It depends on ionization energy I,polarizability,and inter-distance R:lIt usually ranges from 0.8 to 8 kJ/mole以上三种力统称范德华力，永久存在于一切分子之间的一种吸引力。这种吸引力没有方向性和饱和性。作用范围小于1纳米，作用能约比化学键小12个数量级。氢键氢键是极性很强的XH键上的氢原子，与另一个键上电负性很大的原子Y上的孤对电子相互吸引而形成的一种键（XH-Y）。氢键有饱和性和方向性，氢键与化学键相似，键能比化学键小得多，不超

5、过40千焦/摩尔。2.2 The Amorphous stateCompletely amorphous polymers like atactic polystyrene exist as long,randomly coiled,interpenetrating chains that are capable of forming stable,flow-restricting entanglements at sufficiently high-molecular-weight.In the melt,thermal energy is sufficiently high for lon

6、g segments of each polymer chain to move in random micro-Brownian motions.As the melt is cooled,a temperature is reached at which all long-range segmental motions ceases.The characteristic temperature is called the glass-transition temperature,Tg.In the glassy state,at temp below Tg,the only molecul

7、ar motions that can occur are short-range motions of several contiguous chain segments and motions of substituent groups.These processes are called secondary relaxations.Chain Entanglements and ReptationlPolymer chains that are sufficiently long can form stable,flow-restricting entanglements.A good

8、analogy can be made to a bowl of spaghetti.lEntanglements have significant importance in relation to viscoelastic properties,melt viscosity,and mechanical properties such as stress relaxation,creep,and craze formation.lIn the melt state,individual polymer chains can move by local Brownian motion res

9、tricted by the topological constraint of neighboring chains.Movement can be visualized as snakelike motion(i.e.,reptation)of the chain within a virtual tube.lThe basic units of crystalline polymer morphology include crystalline lamellae consisting of arrays of folded chains.lReentry of each chain in

10、 the folded structure can be adjacent or nonadjacent.A chain participating in adjacent reentry can form a tight(or regular)loop or form a loose(irregular)loop.lThe thickness of typical crystallite may be only 0.1 to 0.2 nm,indicating that only a portion of the complete chain(e.g.,40 to 80 repeating

11、units in the case of polyethylene)is involved in each fold.For some polymers crystallized from the melt for from concentrated solution,crystallites can organize into large spherical structures called spherulites.Each spherulite contains arrays of lamellar crystallites that are typically oriented wit

12、h the chain axis perpendicular to the radial(growth)direction of the spherulite.In a few cases,such as occurs in the crystallization of polypropylene,chain folding will occur with the chain oriented along the radial direction.球晶是由径向发射的微纤（fibrils）组成的，这些微纤就是长条状的晶片，其厚度在1020纳米之间。Conformations of Polymer

13、 CrystallitelHigh thermal energy favors a large number of conformations in the melt.lAs the melt is cooled,the lower-energy conformations are favored,and chains are free to organize into lamellar structure.lFor many polymers,the lowest-energy conformation is the extended chain or planar zigzag confo

14、rmation.Such polymers include polyethylene,syndiotactic vinyl polymers,and polymers capable of hydrogen bonding between chains,such as poly(vinyl alcohol)and nylons.In cases of polymers with large substituent groups,such as the methyl group in polypropylene,for most isotactic polymers,and for polyme

15、rs of some 1,1-disubstituted ethylenes like polyisobutylene,the lowest-energy conformation is a helix of some preferred geometry.For the examples of polypropylene,three repeat units form a single turn in the helix(i.e.,a 31 or 3/1 helix)In the case of polyoxyethylene,there are 7 repeat units per two

16、 terms(i.e.,72 or 7/2 helix).聚四氟乙烯的构象聚四氟乙烯的构象H被F取代，而F的范德华半径为0.14nm，其两倍0.28nm已大于0.252nm，如果聚四氟乙烯同样采取全反式构象，F原子就会出现拥挤，电子云互相排斥，这种排斥作用使得聚四氟乙烯被迫采取一种稍稍偏离全反式平面构象，呈现一种扭转构象。当T19时，旋转角为12，变成H157的螺旋构象。聚甲醛和聚氧化乙烯的构象聚甲醛和聚氧化乙烯的构象由于聚甲醛聚甲醛分子主链上有氧原子存在，其对应位置的空间位阻小，与全碳链不同，旁式构象的能量反而比反式构象的能量低,其中COC键角为112，OCO键角为111，形成等同周期为1.

17、73nm的.gg.系列的H95螺旋构象。聚氧化乙烯聚氧化乙烯则形成等同周期为1.93nm的.ttgttg.系列的H72螺旋构象。90-(180-)/2等规等规a 烯烃分子链的构象烯烃分子链的构象等规a烯烃的分子链，由于取代基的空间位阻，全反式构象的能量一般比反式旁式交替出现构象的能量高，所以，这类聚合物的分子链在晶体中通常采取交替出现的反式旁式交替构象序列的螺旋形构象。聚丁二烯在结晶中的构象聚丁二烯在结晶中的构象聚丁二烯有四种异构体，其中反式1,4聚丁二烯、顺式1,4聚丁二烯和间规1,2聚丁二烯都取主链接近平面锯齿形的全反式构象，而等规1,2聚丁二烯取H31螺旋形构象。2.4 Solid-St

18、ate Model of Polymers Crystalline Model of Polymer The fringed-micelle model 模型要点 高聚物只能部分结晶，具有晶区和非晶区两相同时并存的特殊结构；每一个高分子链可以贯穿几个晶区和非晶区；在非晶区，分子链是卷曲且互相缠结的，在晶区，分子链互相平行排列形成规整结构；晶区的取向是无规的。The power panel model折叠链部分是由多条链组成的，而且它们的排列是任意的，相邻链属于不同的分子链。形成多层片晶时，一条分子链可以从一个晶片，通过非晶区进入到另一个晶片中去。2.5 Crystallization of P

19、olymersThe chemical structure and CrystallizationIn general,symmetrical chain structures,which allow close packing of polymer molecules into crystalline lamellae and specific interactions between chains that favor molecular orientation,favor crystallinity.For example,linear polyethylene and polytetr

20、afluoethylene,which have symmetrical substituted repeating units,are highly crystalline.Atactic poly(vinyl chloride)(PVC)with its asymmetrically placed chlorine is highly amorphous.When two chlorine atoms are symmetrically located on the same carbon atom,as they are in poly(vinylidene chloride),crys

21、tallinity is against favored.Although atactic-PVC is amorphous,atactic-poly(vinyl alcohol)is partly crystalline because of the occurrence of specific interchain interactions(i.e.,hydrogen bonding).Specific interactions are particularly important in enhancing crystallinity in the case of nylons,for w

22、hich hydrogen bonds can form between an amide carbonyl group on one chain and the hydrogen atom of an amide group on an adjacent chain.Both tacticity and geometric isomerism(i.e.,a trans configuration)favor crystallinity.高分子结构与结晶能力高分子结构与结晶能力结构对结晶能力的影响：1.链的对称性链的对称性：高分子链结构的对称性越高，越容易结晶。主链全部是碳原子：聚乙烯和聚四氟

23、乙烯，聚偏二氯乙烯和聚异丁烯。主链含杂原子：聚甲醛、聚醚、聚酯等。2.链的规整性链的规整性：高分子链的规整性越高，越容易结晶。主链含不对称中心的高聚物：等规度高，结晶能力大。存在顺反异构的二烯类聚合物：反式构象聚合物大于顺式构象聚合物。3.共聚物的结晶能力共聚物的结晶能力：共聚会破坏链的规整性，使结晶能力下降。4.其他结构因素其他结构因素：链的柔顺性：柔顺性不好，会降低聚合物的结晶能力。链的支化：支化使链的对称性和规整性受到破坏，导致结晶能力下降。交联度：随着交联度的增加，高聚物会迅速失去结晶能力。分子间力：分子间力使链的柔顺性降低，会影响结晶能力。但分子间如形成。氢键，将有利于结晶结构的稳定

24、。Crystallization KineticsFor a given polymer,the extent of crystallization attained during melt processing depends upon the rate of crystallization and the time during which melt temperatures are maintained.Above Tm,some polymers that have low rates of crystallization,such as poly(ethylene terephtha

25、late),polycaprolactone,and nylon-6,6 can be quenched rapidly enough to achieve an amorphous state.Other polymers having much higher rates of crystallization,such as polyethylene,cannot be quenched quickly enough to prevent crystallization.For a given polymer,the rate of crystallization depends upon

26、the crystallization temperature.Crystallization Rate and Temperature Relationship高聚物的结晶范围在 Tg 与Tm 之间，在适当温度下，结晶速度会出现极大值。Tmax 可以用 Tg 和 Tm 来估算：也可以仅从 Tm 进行估算：高聚物结晶速度温度的关系：区熔点以下1030范围内，是熔体由高温冷却时的过冷区。区从区下限开始，向下3060范围内，该区内成核速度控制结晶速度。区熔体结晶生成的主要区域，Tmax在该区。区结晶速度随温度迅速下降。结晶速度及其测定方法结晶速度及其测定方法高聚物的结晶过程与小分子相似，包括晶核的

27、形成和晶粒的生长两个步骤，结晶速度包括成核速度、结晶速度和由它们共同决定的结晶总速度。成核速度成核速度：用偏光显微镜、电镜直接观察单位时间内形成晶核的数目。结晶生长速度结晶生长速度：用偏光显微镜、小角激光散射法测定球晶半径随时间的增大速度，即球晶的径向生长速度。结晶总速度结晶总速度：用膨胀计法、光学解偏振法等测定结晶过程进行到一半所需的时间t1/2的倒数作为结晶总速度。Techniques to Determine the Rate of CrystallizationThe rate of crystallization can be followed by a variety of tec

28、hniques,such as:lDilatometric measurement of volume changes;lInfrared spectroscopylOptical-microscopic measurement of the growth of spherulite radii with timeAvrami Equation for CrystallizationDuring the crystallization process,the fractional crystallinity,at time t may be approximated by the Avrami

29、 equation:Where k is a temperature-dependent growth-rate parameter and n is a temperature-independent nucleation index.Typically,n varies between 1 and 4 depending on the nature of nucleation and growth process.For example:In the case of sporadically nucleating spherulites,as may result during quies

30、cent melt crystallization near Tm,the nucleation index is approximately 4.The fractional crystallinity of polymer can be determined by variety of techniques,including infrared spectroscopy,density,X-ray diffraction measurements,and calorimetric methods,which will be described in next section.Avrami

31、方程用于高聚物的结晶过程方程用于高聚物的结晶过程高聚物的等温结晶过程，常用Avrami 方程来描述：当收缩率半结晶期结晶的成核机理：均相成核均相成核：由熔体中的高分子链段靠热运动形成有序的链束作为晶核。异相成核异相成核：是以外来的杂质、未完全熔融的残余结晶聚合物、分散的小颗粒固体或容器的壁为中心，吸附熔体中的高分子链作有序排列而形成晶核。均相成核：n=3+1=4；异相成核：n=3+0=3Techniques to determine rate of crystallizationDilatometric measurement:利用高聚物结晶时分子链作规整紧密堆砌时发生的体积变化，跟踪测量结果

32、中的体积收缩，来研究结晶过程。规定体积收缩进行到一半所需时间的倒数1/t1/2作为实验温度下的结晶速度。Optical depolarization:利用光学双折射性质来测定结晶速度的方法。解偏振光强度与结晶度成正比。Polarized optical microscope:可在等温条件下观察高聚物球晶的生长过程，测量球晶的半径随时间的变化。等温结晶时，球晶的半径与时间成线性关系。影响结晶速度的其他因素影响结晶速度的其他因素1.分子结构结构简单的分子：例如，聚乙烯、聚四氟乙烯链的对称性、立体规整度越高，取代基的空间位阻越小，链越柔顺，结晶速度越大。含极性基团，特别是能形成氢键的高聚物：例如，聚

33、酰胺结晶速度稍慢于聚乙烯。分子链带有庞大侧基或主链含有苯环、共扼双键的高聚物：空间阻碍或链段刚性越大，结晶速度越慢。2.分子量：分子量越大，其结晶速度越慢。3.杂质：杂质对结晶过程的影响有双重性。4.溶剂：有些溶剂能促进结晶过程。5.应力：应力有加速结晶过程的作用。2.6 Techniques to Determine CrystallinityDensity MeasurementDensity can be easily measured at some standard temperature(e.g.,23C)by means of a calibrated density-gradi

34、ent column.Once the density()of the semicrystalline sample has been measured,the fractional crystallinity,can be determined as:If the densities of a totally amorphous(a)and totally crystalline sample(c)are known or can be estimated.Generally,values of amorphous densities are available only for semic

35、rystalline polymers with low crystallization rates that enable rapid quenching from the melt to a totally amorphous state.The crystalline densities of polymers can be obtained from density measurements of single crystals or crystalline low-molecular-weight analogs or may be determined from X-ray det

36、ermination of crystal densities.X-Ray DiffractionX-ray diffraction is widely used technique of polymer characterization that can provide information concerning both the crystalline and amorphous states.X-rays are high-energy photons having short wavelengths(0.05 to 0.25 nm)that interact with electro

37、ns.When a X-ray beam is focused on a material,some electrons will be absorbed,some will be transmitted unmodified,while others will be scattered due to interaction with electrons.This interaction results in scattering pattern that is a function of the scattering angle,usually designated as 2 for con

38、venience.The scattering pattern provides information on the electron-density distribution and,therefore,the positions of atoms in a polymer.The relationship between the intensity of an(unpolarized)X-ray beam,I0,the scattered intensity,I,and the scattering angle is given by the Thomson formula:r is t

39、he distance between the electron and the detector at which the scattered-beam intensity is measured and K is a constant given as:where e(1.602210-19C)and m(9.109510-35 kg)are the charge and mass of an electron,respectively,and c is the speed of light(3.00108 m s-1).Terms often used in X-ray scatteri

40、ng are wide-angle X-ray scattering(WAXS)and small-angle X-ray scattering(SAXS).WAXS is used for the investigation of small-scale structures(0，S0要使G0，必须使HTS。所以要使过程自发进行，只有两种可能性：1.降低T；2.降低S。在熔点温度时，晶相与非晶相达到热力学平衡，G=0，则：Tm=H/S拉伸使熵减小，熔点提高。Structure-Property RelationshipsBoth Tg and Tm are strongly influenc

41、ed by the chemical structure of the repeating unit.In general,both Tg and Tm increase with decreasing flexibility of the polymer chain.Flexibility decreases with increasing aromatic composition of the main chain or by incorporation of bulky substituent groups or nonrotational(e.g.,unsaturated)groups

42、 in the main chain.1.聚烯烃：随取代基的空间位阻增大，主链内旋转位阻增加，分子链的柔顺性降低，熔点升高。当正烷基侧链的长度增加时，体积增大，影响了链间的紧密堆砌，使熔点下降。当侧链长度继续增加时，会使熔点回升。当取代基为体积庞大基团时，由于内旋转的空间位阻，使分子链刚性增加，熔点升高。这类取代基的空间位阻越大，熔点升高越多。2.脂肪族聚酯、聚酰胺、聚氨酯和聚脲：这类聚合物随重复单元的增加，逐渐趋于聚乙烯的熔点。熔融热不能笼统与分子相互作用相联系，因为熔融热不同于内聚能，熔融过程是固液转变，熔融热是熔融前后分子间相互作用量度。聚酰胺熔融前后氢键依然存在，熔点升高是由于分子间相

43、互作用导致构象减少导致。这类熔点变化随重复单元中碳原子个数奇偶变化。3.主链含苯环或其它刚性结构的高聚物：主链含有环状结构或共扼结构的聚合物，都使链的刚性增加，具有比对应的饱和脂肪链聚合物高得多的熔点。对位芳族高聚物的熔点比相应的间位芳族高聚物的熔点要高。4.其它聚合物：聚四氟乙烯，熔点为327。二烯类的1,4聚合物都具有较低的熔点。Melting Temp of Copolymers当两种单体形成共聚物时，有两种可能情况：1.形成的共聚物本身不结晶2.形成的共聚物能结晶，但不能进入原聚合物的晶格形成共晶。对于无规共聚物：嵌段共聚，PXA，当其趋于1时，熔点降低很小。交替共聚物，PXA，熔点将

44、发生急剧降低。Influence of Impurity melting Temp杂质使低分子晶体熔点降低，如果把链端当作杂质处理，高分子的分子量对熔点的影响可以表示为：Pn是高聚物的数均聚合度。当分子量较大时，链端的数目很小，对熔点影响有限；当分子量较小时，这种影响不可忽略。对于结晶高聚物，各种低分子的稀释剂（包括增塑剂、未聚合物单体、填充剂）造成熔点降低：可见良溶剂比不良溶剂使聚合物熔点降低的效应更大Orientalization of Polymersl取向：由于高分子链的几何不对称性，在外电场的作用下，分子链将沿着外电场的方向排列，这一过程就是取向。分子链的取向现象包括分子链、链段及结

45、晶高聚物晶粒的定向排列。l取向有两种方式，即单轴取向和双轴取向。(Uniaxial orientation and diaxial orientation)2.9 Orientalization of PolymersOrientalization Mechanism of Polymers链段取向非晶态高聚物的取向分子取向非晶区的取向（链段、分子的取向）结晶高聚物的取向晶区的取向（晶粒的取向)Orientation Index and Techniques to Determine it取向度一般用取向函数表示：实际取向试样的平均取向角为：Techniques to determine or

46、ientation index1.Sonic transmission2.Optical Birefringence 3.Wide angle X-ray diffraction随取向度增加，环形衍射变成圆弧并逐渐缩短，最后成为衍射点，以圆弧的长度的倒数表示微晶取向度的量度。2.10 Liquid-Crystallinity of Polymers液晶态：具备液态物质的流动性，同时也部分地保存着晶态物质分子的有序排列，在物理性质上表现出各向异性，形成一种兼有晶体和液体的部分性质的过渡状态，该中间态为液晶态。形成液晶的物质所应具备的条件：具有刚性的分子结构，具有在液态下维持分子的某种有序排列所需

47、的凝聚力，分子结构上必须含有一定的柔性基团。lClear point:The transition from anisotropic to isotropic state,it belongs to first-order thermal transition.lLiquid-crystalline polymers are classified by formation condition:Thermotropic liquid-crystalline Polymers and Lyotropic liquid-crystalline polymers)lLiquid-Crystalline

48、 Polymers are classified into Sematic,Nematic,and Cholesteric liquid-crystalline polymers in terms of liquid-crystalline structure.Liquid Crystal PhasesProperties of LCElectricForcesOrientationLightPolarizationPolarizationNematic PhaseSmectic PhaseCholesteric PhaseDiscal PhaseBanana PhaseBirefringen

49、ceElectric and Magnetic Field EffectsPolymeric Liquid CrystalsMain-chain liquid crystal polymersSide-chain liquid crystal polymersCombined liquid crystal polymersLaterally attachedTerminally attached作业作业：P330:(8);(11);(13)（1）实验测量含有不同量-氯代萘的一组线型聚乙烯试样的熔点，得到的数据如下：如果非晶聚乙烯和-氯代萘的密度分别为0.8gcm-3和1.1gcm-3，估算聚乙烯的熔融热和聚乙烯与-氯代萘的相互作用参数。-氯代萘的体积分数聚乙烯的熔点0.000.060.160.320.520.750.95 (C)137.5134.5131125120115110(2)聚对苯二甲酸乙二酯的平衡熔点=280，熔融热Hu=26.9千焦/摩尔重复单元，试预计分子量从10000增大到20000时，熔点将升高多少度？