10.测试功能(天选打工人).ppt

《10.测试功能(天选打工人).ppt》由会员分享，可在线阅读，更多相关《10.测试功能(天选打工人).ppt（21页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、Date:2023/10/13File:SSP1_11C.1SIMATIC S7Siemens AG 2000.All rights reserved.Information and Training CenterKnowledge for Automation测试功能测试功能Date:2023/10/13File:SSP1_11C.2SIMATIC S7Siemens AG 2000.All rights reserved.Information and Training CenterKnowledge for Automation程序的状态监视功能程序的状态监视功能Date:2023/10

2、/13File:SSP1_11C.3SIMATIC S7Siemens AG 2000.All rights reserved.Information and Training CenterKnowledge for Automation程序状态监视的模式程序状态监视的模式Date:2023/10/13File:SSP1_11C.4SIMATIC S7Siemens AG 2000.All rights reserved.Information and Training CenterKnowledge for Automation程序状态监视的触发点程序状态监视的触发点Date:2023/10

3、/13File:SSP1_11C.5SIMATIC S7Siemens AG 2000.All rights reserved.Information and Training CenterKnowledge for Automation程序状态显示信息的选择程序状态显示信息的选择LAD/STL/FBD 编辑器编辑器-Options-Customize .或或 在运行状态：在运行状态：在下面的位置点击鼠标右键在下面的位置点击鼠标右键Date:2023/10/13File:SSP1_11C.6SIMATIC S7Siemens AG 2000.All rights reserved.Inform

4、ation and Training CenterKnowledge for Automation启动启动“Monitor/Modify Variables”工具工具Date:2023/10/13File:SSP1_11C.7SIMATIC S7Siemens AG 2000.All rights reserved.Information and Training CenterKnowledge for Automation输入变量表输入变量表Date:2023/10/13File:SSP1_11C.8SIMATIC S7Siemens AG 2000.All rights reserved.

5、Information and Training CenterKnowledge for Automation监视和修改变量监视和修改变量Date:2023/10/13File:SSP1_11C.9SIMATIC S7Siemens AG 2000.All rights reserved.Information and Training CenterKnowledge for Automation设定触发点设定触发点循环程序执行的开始循环程序的结束转换：RUN-STOP 循环程序执行PIIPIQDate:2023/10/13File:SSP1_11C.10SIMATIC S7Siemens A

6、G 2000.All rights reserved.Information and Training CenterKnowledge for Automation保存变量表保存变量表Date:2023/10/13File:SSP1_11C.11SIMATIC S7Siemens AG 2000.All rights reserved.Information and Training CenterKnowledge for Automation打开变量表打开变量表Date:2023/10/13File:SSP1_11C.12SIMATIC S7Siemens AG 2000.All right

7、s reserved.Information and Training CenterKnowledge for Automation建立与建立与CPU的连接的连接组态的组态的CPU(从硬件站从硬件站“Station 2”来的来的VAT)Station 2直接连接的直接连接的CPUStation 1PGStation 3可访问的可访问的 CPUDate:2023/10/13File:SSP1_11C.13SIMATIC S7Siemens AG 2000.All rights reserved.Information and Training CenterKnowledge for Automa

8、tion在停止模式修改输出在停止模式修改输出Date:2023/10/13File:SSP1_11C.14SIMATIC S7Siemens AG 2000.All rights reserved.Information and Training CenterKnowledge for Automation强制功能强制功能Date:2023/10/13File:SSP1_11C.15SIMATIC S7Siemens AG 2000.All rights reserved.Information and Training CenterKnowledge for Automation断点调试功能

9、断点调试功能(1(1)Date:2023/10/13File:SSP1_11C.16SIMATIC S7Siemens AG 2000.All rights reserved.Information and Training CenterKnowledge for Automation断点断点调试功能断点调试功能(2(2)下一条指令Date:2023/10/13File:SSP1_11C.17SIMATIC S7Siemens AG 2000.All rights reserved.Information and Training CenterKnowledge for Automation练

10、习练习11.111.1：监视和修改变量：监视和修改变量32 通道培训单元通道培训单元16通道培训单元通道培训单元Date:2023/10/13File:SSP1_11C.18SIMATIC S7Siemens AG 2000.All rights reserved.Information and Training CenterKnowledge for Automation练习练习11.211.2：在停止状态修改变量在停止状态修改变量Date:2023/10/13File:SSP1_11C.19SIMATIC S7Siemens AG 2000.All rights reserved.Info

11、rmation and Training CenterKnowledge for Automation练习练习11.311.3：修改变量功能触发点的使用：修改变量功能触发点的使用Date:2023/10/13File:SSP1_11C.20SIMATIC S7Siemens AG 2000.All rights reserved.Information and Training CenterKnowledge for Automation练习练习11.411.4：强制功能强制功能Date:2023/10/13File:SSP1_11C.21SIMATIC S7Siemens AG 2000.All rights reserved.Information and Training CenterKnowledge for Automation练习练习11.511.5：程序状态和监视变量的结合程序状态和监视变量的结合