IEEE Std 946™-2020原版完整文件.docx

《IEEE Std 946™-2020原版完整文件.docx》由会员分享，可在线阅读，更多相关《IEEE Std 946™-2020原版完整文件.docx（74页珍藏版）》请在淘文阁 - 分享文档赚钱的网站上搜索。

1、STANDARDS IEEE Recommended Practice for the Design of DC Power Systems for Stationary ApplicationsIEEE Power and Energy SocietyDeveloped by theEnergy Storage and Stationary Battery CommitteeIEEE Std 946-2020(Revision ofIEEE Std 946-2004)Authorized licensed use limited to: University Town Library of

2、Shenzhen. Downloaded on January 26,2024 at 00:49:22 UTC from IEEE Xplore. Restrictions apply.IEEE Std 946-2020(Revision of IEEE Std 946-2004)IEEE Recommended Practice for the Design of DC Power Systems for Stationary ApplicationsDeveloped by theEnergy Storage and Stationary Battery Committeeof theIE

3、EE Power and Energy SocietyApproved 30 January 2020IEEE-SA Standards BoardAbstract: Recommended practices for the design of dc power systems for stationary applications are provided in this document. The components of the dc power system addressed by this document include lead-acid and nickel-cadmiu

4、m storage batteries, static battery chargers, and distribution equipment. Guidance in selecting the quantity and types of equipment, the equipment ratings, interconnections, instrumentation and protection is also provided. This recommendation is applicable for power generation, substation, and telec

5、ommunication applications.Keywords: auxiliary, backup, battery, battery charger, charger sizing, control, cross-tie, dc, direct current, distribution, duty cycle, generating station, ground detection, IEEE 946, instrumentation, nuclear, panels, protection coordination, rectifiers, reserve, selective

6、 protection, short-circuit, substation, telecommunicationThe Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USACopyright 2020 by The Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 23 September 2020. Printed in th

7、e United States of America.IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers, Incorporated.National Electrical Safety Code and NESC are registered trademarks and service marks in the U.S. Patent & Trademark Office, ow

8、ned by The Institute of Electrical and Electronics Engineers, Incorporated.National Electrical Code, NEC, NFPA 70, and NFPA 70E are registered trademarks in the U.S. Patent & Trademark Office, owned by the National Fire Protection Association.PDF:ISBN 978-1-5044-6454-3STD24059 Print:ISBN 978-1-5044-

9、6455-0STDPD24059IEEE prohibits discrimination, harassment, and bullying.For more information, visit https:/www.ieee.org/about/corporate/governance/p9-26.html.No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permissio

10、n of the publisher.Important Notices and Disclaimers Concerning IEEE Standards DocumentsIEEE Standards documents are made available for use subject to important notices and legal disclaimers. These notices and disclaimers, or a reference to this page (https:/standards.ieee.org/ipr/disclaimers.html),

11、 appear in all standards and may be found under the heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.”Notice and Disclaimer of Liability Concerning the Use of IEEE Standards DocumentsIEEE Standards documents are developed within the IEEE Societies and the Standards Coor

12、dinating Committees of the IEEE Standards Association (IEEE SA) Standards Board. IEEE develops its standards through an accredited consensus development process, which brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE Standards are documents d

13、eveloped by volunteers with scientific, academic, and industry-based expertise in technical working groups. Volunteers are not necessarily members of IEEE or IEEE SA, and participate without compensation from IEEE. While IEEE administers the process and establishes rules to promote fairness in the c

14、onsensus development process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained in its standards.IEEE does not warrant or represent the accuracy or completeness of the material contained in its standards, and expr

15、essly disclaims all warranties (express, implied and statutory) not included in this or any other document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency,

16、or completeness of material. In addition, IEEE disclaims any and all conditions relating to results and workmanlike effort. In addition, IEEE does not warrant or represent that the use of the material contained in its standards is free from patent infringement. IEEE Standards documents are supplied

17、“AS IS” and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpo

18、int expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard.In publishing and making its standards available, IEEE is not suggesting or rendering professional or other ser

19、vices for, or on behalf of, any person or entity, nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumst

20、ances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard.IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: THE NEED TO PROCURE SU

21、BSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVE

22、N IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.12Authorized licensed use limited to: University Town LibrarCy oopf Syrhiegnhzthen2.0D2o0wInEloEaEde. dAlol nrigJahntsuarreys2e6r,v2e0d2.4 at 00:49:22 UTC from IEEE Xplore. Restrictions apply.Transla

23、tionsThe IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE is the approved IEEE standard.Official statementsA statement, written or oral, that is not processed in accordanc

24、e with the IEEE SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, nor be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an indiv

25、idual presenting information on IEEE standards shall make it clear that the presenters views should be considered the personal views of that individual rather than the formal position of IEEE, IEEE SA, the Standards Committee, or the Working Group.Comments on standardsComments for revision of IEEE S

26、tandards documents are welcome from any interested party, regardless of membership affiliation with IEEE or IEEE SA. However, IEEE does not provide interpretations, consulting information, or advice pertaining to IEEE Standards documents.Suggestions for changes in documents should be in the form of

27、a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of i

28、ts Societies and Standards Coordinating Committees are not able to provide an instant response to comments, or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participa

29、te in evaluating comments or in revisions to an IEEE standard is welcome to join the relevant IEEE working group. You can indicate interest in a working group using the Interests tab in the Manage Profile & Interests area of the IEEE SA myProject system. An IEEE Account is needed to access the appli

30、cation.Comments on standards should be submitted using the Contact Us form.Laws and regulationsUsers of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not constitute compliance to any applicable regulato

31、ry requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as do

32、ing so.Data privacyUsers of IEEE Standards documents should evaluate the standards for considerations of data privacy and data ownership in the context of assessing and using the standards in compliance with applicable laws and regulations.CopyrightsIEEE draft and approved standards are copyrighted

33、by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These includeboth use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering p

34、ractices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents.PhotocopiesSubject to payment of the appropriate licensing fees, IEEE will grant users a limited, non-exclusive license

35、 to photocopy portions of any individual standard for company or organizational internal use or individual, non- commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400; htt

36、ps:/ Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center.Updating of IEEE Standards documentsUsers of IEEE Standards documents should be aware that these documents may be superseded at any time by the i

37、ssuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect.Every IEEE standard

38、 is subjected to review at least every 10 years. When a document is more than 10 years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to deter

39、mine that they have the latest edition of any IEEE standard.In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit IEEE Xplore or contact IEEE. For more information about the IEEE SA or IE

40、EEs standards development process, visit the IEEE SA Website.ErrataErrata, if any, for all IEEE standards can be accessed on the IEEE SA Website. Search for standard number and year of approval to access the web page of the published standard. Errata links are located under the Additional Resources

41、Details section. Errata are also available in IEEE Xplore. Users are encouraged to periodically check for errata.PatentsIEEE Standards are developed in compliance with the IEEE SA Patent Policy.Attention is called to the possibility that implementation of this standard may require use of subject mat

42、ter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then

43、the statement is listed on the IEEE SA Website at https:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and

44、conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses.Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be re

45、quired, for conducting inquiriesinto the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this sta

46、ndard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.IMPORTANT NOTICEIEEE Standards do not guarantee or ensure sa

47、fety, security, health, or environmental protection, or ensure against interference with or from other devices or networks. IEEE Standards development activities consider research and information presented to the standards development group in developing any safety recommendations. Other information

48、 about safety practices, changes in technology or technology implementation, or impact by peripheral systems also may be pertinent to safety considerations during implementation of the standard. Implementers and users of IEEE Standards documents are responsible for determining and complying with all appropriate safety, security, environmental, health, and interference protection practices and all applicable laws and regulations.ParticipantsAt the time this rec